208.99EUR

Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
[FUTR7114SB]


Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver

With the Futaba R7114SB, Futaba offers a compact receiver with telemetry and 14 ports, equipped with 2 dipole antennas for difficult reception conditions. This makes the receiver ideal for larger models in which many servos need to be connected. In addition, the R7114SB has the FASST transmission protocol built in as an option and can be conveniently switched at the receiver!
Analogue or digital servos can be connected to ports 1 to 14. To enable shorter response times, the servo output signal for digital servos can be changed to 6.3 ms (instead of 16 ms for analogue servos).
Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port. All S.BUS servos are digitally addressed and can be connected with a single servo cable (3 wires). Although 4 servos are installed in a wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analogue servos are to be used on the S.BUS, they must be connected using a PWM adapter.
The R7114SB has antenna diversity with two dipole antennas. The receiver constantly compares which antenna has the better signal and switches to it in a flash.
S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). In this way, the measured values can be displayed on the transmitter or output acoustically. In addition, the receiver always automatically transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.
ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!

FEATURES
14/18-channel FASST / FASSTest receiver
Telemetry with S.BUS2
Telemetry with 32 channels
S.BUS / S.BUS2 port
Hi-Voltage (HV)
FASST Multi Normal / High Speed Mode
Dipole antenna diversity
Pulse switching Digital servos
Transmission type: FASSTest / FASST
Frequency range: 2.4 GHz
Channels: 14 PWM / 18 S.BUS
Transmitting power: 100 mW EIRP
S.BUS port: S.BUS / S.BUS2
Voltage range: 3.7 - 8.4 V
Weight: 21.0 g
Dimensions: 50 x 37 x 15 mm


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Lock washer 2.2 mm (20 pcs)
2 x Quicklock washer 3 mm (10 pcs)
1 x M3-M4 rubber washer (8 pcs)
2 x Circlik for shaft 1.2 mm (10 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
2 x Flat washer 4.3 mm (20 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
2 x Aluminium wide washer M3 gold (4 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Xplorer2 anemometro
1 x Xplorer1 anemometro
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x Battery RX JETI LiIon RB 6200 7.2v
2 x PowerPack 2.5X2 PRO
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
2 x Battery RX JETI LiIon RB 5200 7.2v
2 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Vacuum bag, 1200 mm x 50 m
1 x Tow hook for tug
1 x ABS tube 7.0x6.0x1000 mm
1 x Quicklock washer 2 mm (10 pcs)
1 x Screw KB 1.4x6 mm (10 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Sprung retractable undercarriage (Alfa model)
1 x Nut for mounting M6 (4 pcs)
1 x TX 250 mW especial GOPRO
1 x Metal ring front FEMA
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Cooler motor type 400
1 x 
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Flap hinge (6 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Small pinned hinge (12 uds)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Micro flex hinge (12 uds)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Large flex hinge (12 uds)
1 x Long pinned hinge (6 uds)
1 x 25 mm reinforced hinge
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x 290 mm M4/4 mm Prop shaft
1 x Glass fabric 390 g/m² aero,10x1m
1 x Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x Carbon plate 350x150x2.5 mm
2 x PVC grid straight 290x185x0.32 mm
2 x Styrene plate 320x120x0.5 mm
1 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x Carbon plate 350x150x2.0 mm
1 x Glass fibre braided sleeve (45mm) roll 10m
1 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x 12 mm dogdrive props
1 x Aluminium sheet 500x250x0,5mm
1 x Glass fibre sleeve Ø 20 mm X 10m
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x OSD Telemetry sensor
1 x Futaba BLS152 - Upper Case
5,583.95EUR
Manufacturers
Manufacturer Info
FUTABA
FUTABA Homepage
Other products
Languages
Español English
Currencies