208.99EUR

Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
[FUTR7114SB]

Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver

With the Futaba R7114SB, Futaba offers a compact receiver with telemetry and 14 ports, equipped with 2 dipole antennas for difficult reception conditions. This makes the receiver ideal for larger models in which many servos need to be connected. In addition, the R7114SB has the FASST transmission protocol built in as an option and can be conveniently switched at the receiver!
Analogue or digital servos can be connected to ports 1 to 14. To enable shorter response times, the servo output signal for digital servos can be changed to 6.3 ms (instead of 16 ms for analogue servos).
Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port. All S.BUS servos are digitally addressed and can be connected with a single servo cable (3 wires). Although 4 servos are installed in a wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analogue servos are to be used on the S.BUS, they must be connected using a PWM adapter.
The R7114SB has antenna diversity with two dipole antennas. The receiver constantly compares which antenna has the better signal and switches to it in a flash.
S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). In this way, the measured values can be displayed on the transmitter or output acoustically. In addition, the receiver always automatically transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.
ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!

FEATURES
14/18-channel FASST / FASSTest receiver
Telemetry with S.BUS2
Telemetry with 32 channels
S.BUS / S.BUS2 port
Hi-Voltage (HV)
FASST Multi Normal / High Speed Mode
Dipole antenna diversity
Pulse switching Digital servos
Transmission type: FASSTest / FASST
Frequency range: 2.4 GHz
Channels: 14 PWM / 18 S.BUS
Transmitting power: 100 mW EIRP
S.BUS port: S.BUS / S.BUS2
Voltage range: 3.7 - 8.4 V
Weight: 21.0 g
Dimensions: 50 x 37 x 15 mm

under request

Reviews

Quick Find

Shopping Cart

1 x	XPower H PROP HUB Ø5.0/20mm +2,5°
1 x	Aluminum Fold Prop Spinner 50 mm / 6mm
2 x	Big-Malibu XL Roof box with surfboard rack GREY
2 x	Aluminum Fold Prop Spinner 40 mm / 5mm
2 x	Aluminum Fold Prop Spinner 38 mm / 5 mm
1 x	Aluminum Fold Prop Spinner 30 mm / 3.17 mm
1 x	Aluminum Fold Prop Spinner 34 mm / 3 mm
2 x	XPower H PROP HUB Ø6.0/42.5mm 0º
2 x	1/6 Pilot "Buddy"
1 x	1/12 Pilot "Langley"
1 x	1/12 Pilot "Fighter"
2 x	Piloto jet 130 mm
2 x	USB Mini Camera endoscope
1 x	Piloto JET 1:3,5
1 x	1/12 Pilot "Tom"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	1/6 Pilot "John"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Pilot "Goose" (Slimline)
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	1/6 Pilot "Garry"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	1/7 Pilot "Japanese"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
2 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
2 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	Propeller APC 14x8.5 Electric Pusher
1 x	Spinner Alumin. propeller pleg. 30 mm / 3,0 mm
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Spinner Alumin. propeller pleg. 40 mm / 5,0 mm
1 x	Propeller POWER-PROP 14x9 Izda
1 x	Spinner propeller pleg. 40 mm / 3,0 mm
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Spinner propeller pleg. 30 mm / 2,3 mm
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
2 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Spinner propeller pleg. 40 mm / 3,0 mm
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	DUPLEX 2.4EX Central Box 210
2 x	FALCON 20X9 CARBON PROPELLER (GAS)
2 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
2 x	ABS I Strip 10x5x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.0x2.0x1000 mm
3 x	Strip 3,5x1,75x330 mm
1 x	Round Rod 5,0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Connector CAN 15
1 x	2,5x60 mm allen screwdriver
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Red spinner 40-45 mm
1 x	Gates hinge
1 x	Interface Jack Adapter IKARUS
1 x	Threaded coupler M3 (10 uds)
1 x	Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x	White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers
2 x	GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C
1 x	GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C
1 x	Angle support XT60 conector
1 x	Support FUEL DOT V3
2 x	800TVL CMOS camera for FPV
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	1/4 Pilot "Mike"
1 x	Pilot "Anthony" (Slimline)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	RX cabel
2 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Q-12 2000 mm Electric
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Head runner
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Head core bushing
1 x	Blade Holder Full (4 blades)
1 x	Cierva C30 Elevator
1 x	Screws M1,6x6 Allen
1 x	Conector MR-60 (pareja)
1 x	Motor KAVAN PRO 2225-1600
1 x	Complet landing gear
1 x	Receptor CORE PBR-26XS 26ch
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Round Rod 3,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	20-25mm Servo Arm
1 x	Round Rod 2,5x1000 mm
2 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Futaba BLS255/272/471SV - Gear Set
1 x	Spare white 38-45 mm spinner
1 x	XH male balance (6S) connector (2 pcs)
1 x	Connectors MPX male
1 x	XH male balance (4S) connector (2 pcs)
1 x	Conector XT-30 (macho)
1 x	Connectors MPX male (PIN double)
1 x	XH female balance (8S) connector (2 pcs)
1 x	Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ
1 x	Charger FUTABA SQN30W12P-08 220v
1 x	Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver

6,862.52EUR