208.99EUR

Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
[FUTR7114SB]

Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver

With the Futaba R7114SB, Futaba offers a compact receiver with telemetry and 14 ports, equipped with 2 dipole antennas for difficult reception conditions. This makes the receiver ideal for larger models in which many servos need to be connected. In addition, the R7114SB has the FASST transmission protocol built in as an option and can be conveniently switched at the receiver!
Analogue or digital servos can be connected to ports 1 to 14. To enable shorter response times, the servo output signal for digital servos can be changed to 6.3 ms (instead of 16 ms for analogue servos).
Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port. All S.BUS servos are digitally addressed and can be connected with a single servo cable (3 wires). Although 4 servos are installed in a wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analogue servos are to be used on the S.BUS, they must be connected using a PWM adapter.
The R7114SB has antenna diversity with two dipole antennas. The receiver constantly compares which antenna has the better signal and switches to it in a flash.
S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). In this way, the measured values can be displayed on the transmitter or output acoustically. In addition, the receiver always automatically transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.
ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!

FEATURES
14/18-channel FASST / FASSTest receiver
Telemetry with S.BUS2
Telemetry with 32 channels
S.BUS / S.BUS2 port
Hi-Voltage (HV)
FASST Multi Normal / High Speed Mode
Dipole antenna diversity
Pulse switching Digital servos
Transmission type: FASSTest / FASST
Frequency range: 2.4 GHz
Channels: 14 PWM / 18 S.BUS
Transmitting power: 100 mW EIRP
S.BUS port: S.BUS / S.BUS2
Voltage range: 3.7 - 8.4 V
Weight: 21.0 g
Dimensions: 50 x 37 x 15 mm

under request

Reviews

Quick Find

Shopping Cart

1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Screwdriver for Hexagon 1,27mm
1 x	Starter 12v (Max 90 and 15ccm)
2 x	Crimping tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x
2 x	Digital scale up to 40 kg
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x	Ball Link Plier
1 x	2,0x50 mm allen screwdriver
1 x	Hot Glue Stick RED
2 x	Copier 5x20 cm pcs
1 x	Z Bender - S Type Tool
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Hot Glue Stick BLACK
2 x
2 x	3,0x60 mm allen screwdriver
1 x	Starter EM Gear Power 250
1 x	Copier 2x20 cm pcs
1 x	Starter Sullivan-STAR 601
1 x	Vacuum pump P1-N
2 x	Disposable Injector Bags (30x16cm) 100 pcs
2 x	Ball Link Plier
2 x	2,5x60 mm allen screwdriver
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Z Bender - S Type Tool
2 x	120x60 mm SLH KOVO wheel
3 x	Motor DLE 170 M- Paramotors
2 x	Small Crow DLE-170M
1 x	Motor DLE 430 cc - Paramotors
3 x	Slave-cable USB Easy Sim
2 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oracover ROYAL RED 2m
1 x	Oracover light Grey 2m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover GREY Seafire Sea 2m
1 x	Oracover Yellow CADMIO 10 m
2 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover Verde 2 m
1 x	Oratex Red Fokker 10 m
1 x	Oracover White 2 m
1 x	Oracover Red 2 m
1 x	Oratex White 2m
1 x	Oratex Natural White 2m
1 x	Ply-Span 450x600/13g Orange
1 x	Oratex Yellow Cub 10 m
1 x	Oracover Brown 2 m
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	BEC 3A FOXY
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Tool for entel
2 x	70x23 Ø3.5 mm aluminium core wheel
2 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
2 x	90x45 mm hard foam KOVO wheel
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 200cc Std
2 x	Big Crow DLE-170M
1 x	Switch Cap L (silver)
1 x	EasyFLY Addon
2 x	GameCommander USB Universal
1 x	Interface Jack Adapter IKARUS
2 x	3,2x1000 mm 2:1 red termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Oracover CHROME 2m
1 x	Oracover Azul Cielo 2 m
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	Oracover Black 2 m
1 x	Xplorer1 anemometro
1 x	Vasa model Catapult
1 x	Superlight deluxe wheel 50 mm (2 pcs)
1 x	Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm
1 x	ORACOVER Fluor red (2 m)
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
2 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Interface Realflight Simulator
1 x	Oracover Azul 2 m
1 x	DG-303 ACRO 3750 mm, canopy
1 x	Surprise XII Horizontal Estabilizer (Freudenthaler)
2 x	Avia spare fouselage CF reinforced (Top Model)
1 x	ASK 21 6.8m
2 x	Fascination 3600 mm, Spare Elevator (Top Model)
1 x	BIG MOSNTER
1 x	Albatros ,spare fuselage (Top Model)
1 x	Kobuz 5000 mm (Airwold)
1 x	Glider IKARUS
1 x	Challenger ARF (Top Model)
1 x	Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x	Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x	Switch Cap L (Red)
1 x	Switch Cap L (black)
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Futaba male 40 cm extension
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Dremel PERMAGRIT thin lime
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Digital precision scale up to 2000 g
1 x	Black tray 2,4EX DC-16/14/24 black
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
2 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Rotorshape Autogyro
1 x	Conector MR-60 (pareja)
1 x	Fournier RF-4D
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	80x40 mm hard foam KOVO wheel
1 x	73x24 mm hard foam KOVO wheel (2 pcs)
1 x	32x9 mm foam standar KOVO wheel (2 pcs)
1 x	76x24 mm (3.0") Type jets aluminium core wheel
1 x	SIG Coverall 1.2x4.5 m
1 x	PVC transparent battery termo-retract 70 mm (10 m)
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Adapter 4,0 mm M6
1 x	LENTUS Multiplex Fundas alas
1 x	Albatros red/white (Top Model)
1 x	FUNRAY RR
1 x	Aero-Master Fuselage (Aero-naut)
1 x	OPUS-V / Jet-CC-BF
1 x	100g Flux Paste for Silver Solder
1 x	EC-Cutter
1 x	Cut tube
1 x	Dremel 3000 130W
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	Dust collector for mould cleaning
1 x	Concave-Convex sandpaper file 13 mm
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Dean-T Plug Mold
1 x	1,5x50 mm allen screwdriver
1 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	Switch for DC: Long 3 Position
1 x	DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
1 x	DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x	DSM 10 Dual Switch Mixer
1 x	Hand Pads for Tray JETI
1 x	Switch for DS: Long 2 Position
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	25 mm Sandpaper file
1 x	89x25 mm (3.50") Type jets aluminium core wheel
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	63x12 mm foam special light KOVO wheel with radius (2 pcs)
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	110x55 mm SLH KOVO wheel
1 x	2.5 inch aluminium core wheel (1 pcs)
1 x	73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x	100x50 mm SLH KOVO wheel
1 x	120x60 mm C SLH KOVO wheel
1 x	44.5x17 mm (1.75") Type jets aluminium core wheel
1 x	45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x	63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	PROFICOVER 5m
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Locking cable tie 3.2x142 (uds)
1 x	Oratex Antik 2m
1 x	Oratex Silver 2m
1 x	Adapter 3,2 mm M8
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Ply-Span 450x600/13g Blue
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Siesta T tail (Topmodel)
1 x	Navaho new design (Top Model)
1 x	Gracia (Top Model)
1 x	LENTUS Multiplex Landig gear retract
1 x	Albatros ,spare cockpit (Top Model)
1 x	Fascination 3600 mm (Top Model)
1 x	Fascination 3600 mm, Canopy (Top Model)
1 x	XENON RC (Aero-naut)
1 x	Surprise XII Rudder (Freudenthaler)
1 x	Flip ARF (Top Model)
1 x	Astra (Top Model)
1 x	Aero-Master (Aero-naut)
1 x	IKURA 4.0 m
1 x	PRESTIGE 2PK
1 x	FOX 3000 mm, Fuselage (FMS)
1 x	Premiant II (Aero-naut)
1 x	Antena FUTABA R7108/7014/7114SB (1 pc)
1 x	FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER
1 x	Futaba Prop Module F14
1 x	Futaba Multi-Switch-Prop 12+2 MODUL
1 x	Futaba BLS152 - Upper Case
1 x	Futaba 3010 - Gear Set

40,980.62EUR