208.99EUR

Receptor FUTABA R7114SB FASSTest/FASST
[FUTR7114SB]

Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver

With the Futaba R7114SB, Futaba offers a compact receiver with telemetry and 14 ports, equipped with 2 dipole antennas for difficult reception conditions. This makes the receiver ideal for larger models in which many servos need to be connected. In addition, the R7114SB has the FASST transmission protocol built in as an option and can be conveniently switched at the receiver!
Analogue or digital servos can be connected to ports 1 to 14. To enable shorter response times, the servo output signal for digital servos can be changed to 6.3 ms (instead of 16 ms for analogue servos).
Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port. All S.BUS servos are digitally addressed and can be connected with a single servo cable (3 wires). Although 4 servos are installed in a wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analogue servos are to be used on the S.BUS, they must be connected using a PWM adapter.
The R7114SB has antenna diversity with two dipole antennas. The receiver constantly compares which antenna has the better signal and switches to it in a flash.
S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). In this way, the measured values can be displayed on the transmitter or output acoustically. In addition, the receiver always automatically transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.
ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!

FEATURES
14/18-channel FASST / FASSTest receiver
Telemetry with S.BUS2
Telemetry with 32 channels
S.BUS / S.BUS2 port
Hi-Voltage (HV)
FASST Multi Normal / High Speed Mode
Dipole antenna diversity
Pulse switching Digital servos
Transmission type: FASSTest / FASST
Frequency range: 2.4 GHz
Channels: 14 PWM / 18 S.BUS
Transmitting power: 100 mW EIRP
S.BUS port: S.BUS / S.BUS2
Voltage range: 3.7 - 8.4 V
Weight: 21.0 g
Dimensions: 50 x 37 x 15 mm

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Arandela abierta 3.1 mm (20 pcs)
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Arandela de bloqueo 1.5 mm (10 pcs)
1 x	Arandela 3.2 mm (20 pcs)
1 x	Arandela dentada 4.3 mm (20 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Arandela de bloqueo 1 mm (10 pcs)
1 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Arandela de bloqueo 2.5 mm (10 pcs)
1 x	Arandela dentada 2.2 mm (20 pcs)
1 x	Arandela 4.3 mm (20 pcs)
1 x	Arandela conica alumino M4 azul (8 pcs)
1 x	Arandela de goma M3-M4 (8 pcs)
1 x	Arandela dentada 2.7 mm (20 pcs)
1 x	Arandela de bloqueo 4 mm (10 pcs)
1 x	Circlick para eje 1.5 mm (10 pcs)
1 x	Circlick para eje 1.2 mm (10 pcs)
1 x	Arandela de bloqueo 3.5 mm (10 pcs)
1 x	Arandela 2.7 mm (20 pcs)
1 x	Arandela conica alumino M4 verde (8 pcs)
1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x	Circlick para eje 1.9 mm (10 pcs)
1 x	Arandela abierta 2.6 mm (20 pcs)
1 x	Arandela 2.2 mm (20 pcs)
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
2 x	Gafas Moritz
2 x	Gafas Nimbus "Black"
2 x	Gafas Flitemaster
2 x	Gafas Nimbus
2 x	Gafas Innovation Plus
3 x	Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
1 x	Ferrita con funda
3 x	Listón triangular de BALSA 6x6x1000 mm
1 x	Listón de HAYA redondo 10 mm x 1000 mm
2 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Liston de BALSA 2,0x10,0x1000 mm
1 x	Listón de BALSA 3,0x5,0x1000 mm
2 x	Listón de NOGAL 1,5x1,5x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Listón de PINO 3,0x5,0x1000 mm
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Listón de BALSA 2,0x2,0x1000 mm
2 x	Listón de TILO 2,0x2,0x1000 mm
2 x	Listón de PINO 6,0x6,0x1000 mm
1 x	Liston de BALSA 6,0x6,0x1000 mm
2 x	Listón de PINO 10x10x1000 mm
1 x	Horn aluminio LH largo L31xH30 (2pcs)
1 x	Horn de mando 5/15 con rótula M2
1 x	Acople ALU M3 Ø 4 (2 uds)
2 x	Horn de mando 6/35 con rótula M3
1 x	Horn de mando carbono 20 mm
2 x	Horn de mando 5/10 con rótula M2
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Horn de mando 5/20 con rótula M2
2 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Horn aluminio RH largo (2pcs)
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Conjunto de mandos arriostrados
1 x	Cable con accesorios
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Horn control flaps (1 pcs)
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Tubo ABS 3,0x1,0x1000 mm
1 x	Tubo ABS 8,0x6,0x1000 mm
1 x	Cable servo PREMIUM 100m (blanco/rojo/azul)
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	Alicate para hacer "Z"
1 x	Soporte para aviones
2 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Tuerca autoempotrable M5 (4 pcs)
1 x	Rueda KOVO SLH 120x60 mm
1 x	Perforador hélices para DLE111 y DA85-150
2 x	Bancada Aluminio set radial motor A60-V2
1 x	Adaptador para motor A50
1 x	Perforador helices DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-50/
1 x	Adaptador para motor A60-V2
1 x	Arandela 1.7 mm (20 pcs)
1 x	Arandela dentada 3.2 mm (20 pcs)
1 x	Arandela abierta 4.1 mm (20 pcs)
3 x	Ferrita 27x14x7 mm
1 x	Gafas Ace
1 x	Ferrita 17x10x6.5 mm
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	Helice T-Motor P 17x5.8 (pack 2 uds)
1 x	Tren aterrizaje ROCKET 400
1 x	Liston de BALSA 10 x 10 x 1000 mm
2 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Plancha de balsa 6,0x100x1000 mm
1 x	Listón de PINO 1,5x3,0x1000 mm
2 x	Listón de CAOBA 3,0x3,0x1000 mm
1 x	Plancha de limoncillo 600x300x3.0 mm
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Listón de CAOBA 2,0x2,0x1000 mm
2 x	Listón de PINO 3,0x10,0x1000 mm
1 x	Plancha de balsa 8,0x100x1000 mm
1 x	Bisagra PIN 4.7 mm (5 pcs)
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Bisagra de nylon 20x15x0,3 (10 pcs)
1 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Conector banana oro 4 mm
1 x	Hoja sierra PROXXON (50mm-100T) para KS-230
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Medidor ángulo palas helicóptero
1 x	Funda conector 2 mm
1 x	Dremel 3000 130W
1 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	Plancha de balsa 5,0x100x1000 mm
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Plancha de balsa 2,0x100x1000 mm
1 x	Plancha de balsa 10x100x1000 mm
1 x	Plancha contrachapado Abedul 600x300x4,0 mm
1 x	Listón de NOGAL 2,0x2,0x1000 mm
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Horn extra largo 60x30
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Horn con ball 55x40
1 x	Horn de mando corto con rodamiento (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Gafas Stratus
1 x	Cono plástico blanco hélice fija 51 mm diámetro / eje 4,0 mm
1 x	Bisagra de nylon 15x0,3 (10 pcs)
1 x	Cono INO 70 mm Chrome (Imitacion metal)
1 x	Cono INO de 70 mm (Imitacion carbono)
1 x	Cono INO 89 mm Chrome (Imitacion metal)
1 x	Cono Aluminio hélice fija 45 mm diámetro / eje 5,0 mm
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
1 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x	Cable video GoPro
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Perforador hélices DLE170
1 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Extensión escape motor OS 120 AX
1 x	Codo escape para SAITO FA65/72/80/82a/91S/100/
1 x	Escape O-ring Saito FG-73 5cyl
1 x	Junta humo metalica G85 (DLE85/DLE170)
1 x	Escape Pitts D.A. 70
1 x	Cono hélice fija 42 mm diámetro / eje 5,0 mm
1 x	Cono hélice fija 60 mm diámetro / eje 5,0 mm
1 x	Gafas Aspen
1 x	Gafas Zurich Sport Sunglasse Dark Sensity BROWN
1 x	Cono INO de 75 mm (Imitacion carbono)
1 x	Cono Aluminio hélice fija 45 mm diámetro / eje 4,0 mm
1 x	Cono F3A 82 mm eje 12 mm perforado
1 x	Cono carbono para F3A 82 mm eje 12 mm
1 x	Cono INO de 89mm (Imitacion carbono)
1 x	Cono INO 51 mm Chrome (Imitacion metal)
1 x	Cono INOVA 102 mm negro
1 x	Cono INO de 102 mm (Imitacion carbono)
1 x	Cono plástico blanco hélice fija 45 mm diámetro / eje 4,0 mm
1 x	Cono Aluminio hélice fija 45 mm diámetro / eje 3,2 mm
1 x	Cono 82mm Black ventilado
1 x	Cono INO 75 mm Chrome (Imitacion metal)
1 x	Cono carbono para F3A 75 mm para Hacker C-50
1 x	Cono carbono para F3A 85 mm para Hacker Q-80
1 x	Cono carbono para F3A 80 mm Spark EVO
1 x	Cono plástico blanco hélice fija 38 mm diámetro / eje 4,0 mm
1 x	Cono Aluminio hélice fija 50 mm diámetro / eje 4,0 mm
1 x	Cono Aluminio hélice fija 50 mm diámetro / eje 3,2 mm
1 x	Cono INO 57 mm Chrome (Imitacion metal)
1 x	Cono INO 63 mm Chrome (Imitacion metal)
1 x	Cono F3A 82 mm eje 12 mm perforado 3BL
1 x	Cono plástico blanco hélice fija 57 mm diámetro / eje 4,0 mm
1 x	Cigüeñal DLA 116

4,207.30EUR