Top » Catalog » FUTABA » FUTFX36

1,550.05EUR

Futaba FX36 2.4GHz FASST Test + R7008SB
[FUTFX36]

The Futaba FX36 is the flagship among the tray style transmitters and was designed for high level model flying and competition use. This transmitter style is popular across Europe and is often used in pattern and glider flying. This high quality transmitter is built to the highest standard and leaves nothing to be desired in terms of transmission reliability and functionality.

The features and telemetry functions are almost identical to the well-known T18MZ and T14SG transmitters. This set uses Futaba's best quality stick units ST-57 (as used in the T18MZ) to give extremely precise control.

You can transmit on FASST, FASSTest, T-FHSS and FHSS allowing you to pick the right receiver for your model. The menu navigation is clearly structured and can be quickly/easily operated via the large colour touch screen. In addition to the familiar functions of the T18MZ Futaba have added a new multicopter menu and the ability to use up to 9 different language options! The integrated SD card slot allows you to store model data and software updates for future helping to make the FX36 future-proof.

T14SG, T16SZ, T18SZ, FX-22, FX-30 and FX-32 model memories are convertible to FX-36.

The ergonomically arranged switches and encoders allow fatigue-free operation during long flights and the set includes 2 aluminium joystick extensions to adjust to the pilot if needed.

• Professional 18-channel remote control system
• Ergonomic transmitter design
• Professional level stick units (ST-57)
• Extensive telemetry functions (Similar to T18MZ)
• New S.BUS functions
• Model selection, internal memory for 30 models (Expandable via SD card)
• 15 Character model / user names
• Modes switchable between FASST, FASSTest, S-FHSS or T-FHSS
• 9 Language menu navigation
• 4.3" Colour touch screen (480 x 272px)
• Telemetry with voice output via loudspeaker or optional headphones
• 6 Digital trims
• 6 Switches
• 2 Rotary dials
• 2 Linear sliders
• Graphical servo monitor that displays all servo paths with servo test function
• Future proof by updating capability via SD card
• Extensive timer functions
• Vibration alarm
• S.Bus port with power support, for programming and logging S.Bus
• 8 Flight conditions per model memory (like T18MZ)
• 10 Option mixes
• AFR 3 modes (Up to 17 points)
• 13 Wing types, 3 tail types & 8 swashplate options
• Fully equipped helicopter menu with swash ring, governor, servo travel and speed compensation, throttle limiter
• 3 curve modes for gas / pitch, up to 17 points possible
• Fully equipped sailor menu with 13 wing types, 3 tail units
• Extensive mixer selection for gliders and engine models (like T18MZ)
• Freely configurable teacher / student channel assignment

Box Contents
• Transmitter FX36 2.4GHz FASSTest
• Receiver R7008SB 2.4 GHz FASSTest
• Large aluminium case
• Transmitter battery 6.0V 2500mAh Eneloop Pro NiMH
• Transmitter battery charging cable
• Switch with charging socket
• 2 Aluminium joystick extensions (M4 Thread)
• Neutralization stopper
• Screwdriver
• Printed user manual

Required Accessories
• NiMH charger

under request

Reviews

Quick Find

Shopping Cart

1 x	"S" set for planes
1 x	Parachutist
1 x	Yellow smoke canister 100 g
1 x	White smoke canister 100 g
1 x	Green smoke canister 65 g
1 x	White smoke canister 65 g
1 x	Green smoke canister 140 g
1 x	AX-60 starters (5 pcs)
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Electric rocket starters (6 pcs)
1 x	Smoke set "M"
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Remote electric ignition system
1 x	"M" set
1 x	Blue smoke canister 100 g
1 x	Initior Transmitter FTX2 Wireless
1 x	White smoke bombs AX-18 (5 pcs)
1 x	B4-0 rocket charges (6 pcs)
2 x	Initior Receiver FRX2 Wireless
1 x	White smoke canister 140 g
1 x	"S" set for boats
1 x	Carbon fiber rod 12 mm x 1000 mm
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Marker ties (20 pcs)
2 x	Carbon fiber rod 14 mmx1000 mm
1 x	SE Ring 200 mm (2 pcs)
3 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 400 mm (2 pcs)
2 x
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Ring 320 mm length (5 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Carbon fiber rod 4.0 mmx1000 mm
2 x	SE Ring 300 mm (2 pcs)
3 x	Cinta Goldfix 1m
1 x	Spikes Band (5 m)
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	Squared carbon wing joinner 5x5x220 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	SE Ring 450 mm (2 pcs)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	Carbon fiber flat 1000x3.0x0.13 mm
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 25 mm
1 x	2,5x60 mm allen screwdriver
1 x	Screwdriver for Torx® TX6
1 x	Z Bender - S Type Tool
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Starter EM Gear Power 80
1 x
1 x	Vacuum pump 12 CFM
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Z Bender - S Type Tool
1 x	Digital precision scale up to 2000 g
1 x	Bungee HLG Premium
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	5 mm Prop Adapter M8
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Profile ABS half cane 3x1000 mm
1 x	Buy Perforated film 145 cm / 50 m
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Ventral support for AX-18/AX-60
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	120x60 mm SLH KOVO wheel
1 x	Red smoke canister 100 g
1 x	Crimping tool
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Screwdriver for Hexagon 1,27mm
1 x	Copier 2x20 cm pcs
1 x	Ball Link Plier
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Dust collector for mould cleaning
1 x	Tape GFK 38 mm
2 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Starter Sullivan-STAR 603 DINATRON
1 x
1 x	SE Ring 480 mm (2 pcs)
1 x	Keypad ALTIS V4
1 x	Altimeter Altis NAO
1 x	Device Terminal
1 x	Telemetry interface ALTIS 12 cm
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
2 x	Vasa model Catapult
1 x	32x9 mm foam standar KOVO wheel (2 pcs)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	STANDOFF GAS ENGINE MOUNT 38 mm
2 x	Slave-cable USB Easy Sim
1 x	Servo NARO Max Std
2 x	Challenger ARF (Top Model)
1 x	ALBATROS 3.0 m (orange/white)
1 x	BULLIT Wing 840 mm
1 x	Canopy Sweet / Siesta
1 x	75 mm INO spinner (carbon imitation)
1 x	Esc MasterSPIN 66 Pro
1 x	Esc MasterBasic 55SB
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Support FUEL DOT V3
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Support XT60 conector (2 pcs)
2 x	13 mm wing servo holder
1 x	ESC KAVAN PRO-160HV Opto 160 Amp
1 x	Esc X-70-OPTO-Pro
1 x	51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	F3A carbon 85 mm spinner for Hacker Q-80
1 x	KOBY 90 LV Esc
1 x	Esc X-75-OPTO-Pro
1 x	ESC YGE 120 LVK
1 x	Falcon Carbon Spinner 82mm for electric motor
1 x	Master MEZON 120
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	Esc KOSMIK 160 HV
1 x	cable TexY
1 x	Esc MasterSPIN 16 Pro
1 x	Esc X-55-SB-Pro
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	PROXXON - SAW BLADE 8MM 0ZI220E
1 x	Telemetry interface ALTIS to Futaba
1 x	Nose OPTIMA 2.200 mm (Elec or Glider)
1 x	Futaba Neckstrap
1 x	MIG 29 3D RTF, Servo
1 x	25 mm carbon servo arm
1 x	89 mm double servo arm with bearing (2 pcs)
1 x	Servo Robbe FS 525 BB MG HV
1 x	Battery bed V2_M (black)
1 x	Conector MT-60 (pair)
1 x	MultiLog Altimeter
1 x	DC Small for MultiLog & UltraLight
1 x	Support pump Xicoy X45
1 x	Support Flush MPX Conector (6 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Support ECU Xicoy X-45
1 x	Tube support Ø 6mm (10 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support Pitot JETI
1 x	Suncover 100cc Red
1 x	Support conector MPX (6 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Universal Filter
1 x	2,0x50 mm allen screwdriver
1 x	Hot Glue Stick GREEN
1 x	25 mm Sandpaper file
1 x	Sealing Iron Sleeve STD
1 x	Servo arms set 40/50/55/5055 MG
1 x	Metal gear set for HS81MG/5082MG
1 x	Horns set HS-65HB/MG, 5065MG
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Servo JETI DSHV 3D13T (13 Kg)
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
1 x	Fast attachment for servos (25 pcs)
1 x	JIVE 100+LV Esc
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	LiPo Storage Box Type "P"
1 x	LiPo Storage Box Type "BIG"
2 x	LA500 Blades
2 x	LA500 cyclic central part
1 x	LA500 Autogyro
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	XPower H PROP HUB Ø5.0/20mm +2,5°
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	ARTIST 1.560 mm
1 x	Bidule 111 3000 mm
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Albatros red/white (Top Model)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Distanzstück motor OS 120 AX
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Spinner propeller pleg. 42 mm / 6,0 mm
1 x	Servo AN-8 HBA
1 x	Cierva C30 Body Spain
1 x	Bearing housing
1 x	Head lower part
1 x	LA500 pre-rotation gear
1 x	Head upper part
1 x	Head spacer
1 x	Head lower part New
1 x	LA500 tail empennage
1 x	LA500 housing-lower cyclic
1 x	Wheel keeper washer
1 x	Balls 4 mm
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x	Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x	Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x	Bidule 55 2460 mm Cabina
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Spring clamp for tube Ø50 mm
1 x	Reed valve for DA 50-R
1 x	Giant Scale Muffler D.A. 70
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Spinner propeller pleg. 30 mm / 3,2 mm
1 x	LA500 rotor head core
1 x	Cierva C30 simulated motor
1 x	Head core bushing
1 x	Head runner
1 x	Autogyro Cierva C30 Spain
1 x	Head core
1 x	LA500 pre-rotation gear hub
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	LA500 ciclic lever
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Motor wall
1 x	GPS, Vario and altitude Sensor SBS-01G
1 x	Battery FUTABA 18MZ
1 x	Aluminum Fold Prop Spinner 40 mm / 5mm
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.)
1 x	Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS)
1 x	XPower H PROP HUB Ø6.0/42.5mm 0º
1 x	Aluminum Fold Prop Spinner 50 mm / 6mm
1 x	Futaba FX36 2.4GHz FASST Test + R7008SB
1 x	Futaba Radio Case
1 x	Futaba Multi-Switch-Prop 12+2 DECODER
1 x	Futaba BLS152 - Upper Case
1 x	Aluminum Fold Prop Spinner 38 mm / 5 mm
1 x	FUTABA 6L + R3106 2.4GHz

15,811.80EUR