2,950.00EUR

Futaba 32MZ 2.4GHz + R7108SB
[FUT32MZ]

Futaba 32MZ 2.4GHz + R7108SB

Futaba’s new flagship radio, the T32MZ, is another leap forward in performance, precision and control.
** NOTE - Pre-Production Information - subject to change without notice. **

With 18 channels as standard - 16 proportional and 2 switched channels - the T32MZ can be used with up to two MPDX-1 Multiprop Decoders (sold separately) to give up to a maximum of 32 channels. When expanded this way, there are 14 proportional channels (as two are used by the Multiprop Decoders), 2 switched channels and a further 16 multiprop channels. Note that multiprop channels have lower resolution to normal proportional channels and they can’t be used in mixed functions. They are perfect for ancilliary and auxiliary functions such as lights, retracts and scale, non-flying functions.
Main Display
The T32MZ has a huge HVGA (640x240 pixel) full colour backlit LCD touch screen. Its anti-reflective construction means it is perfect for indoor and outdoor use.

Sub Display
A first for Futaba, the T32MZ has a colour sub-display at the top of the transmitter for timers and telemetry information.

High Capacity 6600mAh LiPo battery
A high capacity transmitter battery gives extended operation times.

Quad Ballraced Hall Effect Stick Units
Each stick axis is supported by dual ball bearings and uses non-contact Hall-effect sensors rather than potentiometers. The throttle stick ratchet can be adjusted to sprung self-neutral without removing the back of the transmitter, thus mode changing is simple.

Replaceable Switches
The 4 toggle switches can be exchanged for optional two, three or momentary switches to suit the pilot’s preference.

Operating protocols
Can be used on FASSTest/FASST/S-FHSS and T-FHSS protocols.

Supplied complete with R7108SB receiver, 6000mAh transmitter LiPo and charger, switch harness, tool box, neck strap and transmitter case.

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Camara USB micro endoscopica
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Cierre cabina aluminio Ø4, I=10 mm
2 x	Cierre de plástico para cabinas
2 x	Anclaje varilla mando M2 mm prisionero/tuerca (2 uds)
1 x	Brazo direccional 16 mm Ø 3 mm ( 2 uds)
2 x	Abrazadera 3.2x142 (20 uds)
1 x	Cable acero trenzado Ø 0,5 mm (10 m)
1 x	Abrazadera 2.5x100 (20 uds)
1 x	Brazo direccional 16 mm Ø 4 mm
1 x	Abrazadera 4.6x203 (20 uds)
1 x	Cable acero trenzado Ø 0,5 mm (20 m)
2 x	Cierre cabina
1 x	Anclaje cabina en L "tipo F3A" (2 pcs)
1 x	Cierre cabina 33/23.5mm (2 uds)
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
1 x	Cable acero trenzado Ø 0,62 mm (10 m)
1 x	Cierre cubiertas o carenados
2 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
2 x	Brazo direccional 12 mm Ø 4 mm
3 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x	Cierre cabina V1 M3 Azul (2 pcs)
2 x	Cable acero trenzado Ø 0,52 mm - 15 kp (10 m)
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Anclaje micro varilla mando Ø 1 mm prisionero/arandela (2 uds)
2 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
2 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Cinta Roving carbono 20m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Fibra carbono tela 160g/m2 127 cm x 1 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
2 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
2 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
2 x	Gafas Aspen
1 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Perfil Acero Inox. 11.5x6.5x1000 mm
1 x	Camara 800 TVL CMOS para FPV
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Conector ABS "L" 1.5 mm x 1000 mm
2 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Perfil Acero Inox. 12.3x7.7x1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
2 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Perfil de ABS de media caña 3x1000 mm
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Perfil de ABS "T" 8.0x8.0x1000 mm
2 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Perfil Acero Inox. 19.5x9.8x1000 mm
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Varilla carbono 16 mm x 1000 mm
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Destornillador Torx® TX8
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
1 x	Oracover Negro 10 m
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Brazo direccional 12 mm Ø 4 mm ( 2 uds)
1 x	Pasacable de goma Ø 5 mm (4 uds)
1 x	Prisionero allen M3x3
1 x	Prisionero 3.5 mm Ø (4 uds)
2 x	Soporte FUEL DOT V3
2 x	Soporte conector MPX empotrado (6 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
3 x	Brazo direccional 16 mm Ø 3 mm
1 x	Varilla mando roscada M2,0 (2 uds) 250 mm
1 x	Varilla mando doble roscada aluminio M3 90 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 60 mm (2 pcs) knurled
1 x	Transmision funda/varilla greyline plastica 3/2 porta kwik link
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Tarjeta SD HC 8 GB
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Fibra de vidrio 25 g/m² 5000x1270 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Fibra carbono tela 160g/m2 100 cm x 5 m
1 x	Fibra carbono tela 240g/m2 100 cm x 5 m
1 x	Fibra de vidrio 80 g/m² (silane, tela cruzada) 100 cm x 50m
1 x	Fibra de vidrio 280 g/m² (silane, tela cruzada) 100 cm x 20 m
1 x	Bolsa vacio 1200 mm x 50 m
1 x	Fibra vidrio 160 g/m2 "twill weave" (20 m x 1 m)
1 x	Fibra de vidrio 49 g/m² (1,10 x 1m)
1 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	Fibra carbono tela 160g/m2 100 cm x 10 m
1 x	Base para servo
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Gafas Flitemaster
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	Bisagra Micro flexible (12 uds)
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Bisagra 18 mm reforzada
1 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra pin 34x16 mm (10 uds)
1 x	Varilla mando doble roscada aluminio M3 70 mm (2 pcs) knurled
1 x	Varilla mando doble roscada aluminio M2,5 70 mm (2 pcs)
2 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Perfil de ABS "T" 2.0x2.0x1000 mm
1 x	Turbina X132 H "Compact Version"
1 x	Pasador 1x8 mm (10 uds)
1 x	Bomba Humo Variable
1 x	Colador protector turbina 73 x 32 mm
1 x	Pipa Jet ASPIRE 2m
1 x	Soporte frontal tren de aterrizaje 29x26x13,5
1 x	Pasacable de goma Ø 3.2 mm (4 uds)
1 x	Pin corto M2 (10 uds)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	Salida para cables 41x5,5 mm (2 pcs)
1 x	Salida para cables 28x5 mm (2 pcs)
1 x	Mando control rueda delantera (MINI)
1 x	Soporte conector XT-60 (2 pcs)
1 x	Pin M1 (10 uds)
1 x	Protector punta ala 38x10x12 (2 pcs)
1 x	Soporte frontal tren de aterrizaje 25x32x16
1 x	Turbina XICOY X180 compact
1 x	Salida para cables 38x4,5 mm (2 pcs)
1 x	Pasacable de goma Ø 4 mm (4 uds)
1 x	Prisionero allen M4x6
1 x	Protector punta ala 30x10 (2 pcs)
1 x	Turbina X132 H "Light Version"
1 x	Soporte ECU Xicoy X-45
1 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte bomba Xicoy X45
1 x	Pasador 1.6x16 mm (10 uds)
1 x	Soporte Pitot JETI
1 x	Soporte bomba/flitro Xicoy X45
1 x	Soporte conector MPX (6 pcs)
1 x	Telemetria XYCOY adapter
1 x	Pin largo M2 (10 uds)
1 x	Colador protector turbina 94 x 32 mm
1 x	Pipa Jet 40N-80N (200 mm)
1 x	Colador protector turbina K45/60/70/85
1 x	Pendulo "Special" depositos 60g
1 x	Tubo humo turbina acero
1 x	Sensor telemetria SPEKTRUM
1 x	Pipa Jet ULTIMATUM 2m
1 x	Pipa Jet 160N-250N (120/130 mm)
1 x	Cono salida escape A-10 Skymaster
1 x	Modulo Bluetooh JETCENTRAL
1 x	Transmision funda/varilla greyline plastica 3/2 kwik link M3 100
1 x	Bisagra papel CA (12 uds)
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Bisagra de nylon 20x20x0,3 (10 pcs)
1 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x	DUPLEX 2.4EX MT 300 EX
1 x	Reductora IPS 150 DX2BB-BXCS 7:1
1 x	Disipador motor tipo 280
1 x	Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x	Cierre para cable de acero diam. 1,0 (10 pcs)

15,083.14EUR