199.00EUR

FesEx-Uni8 System
[HK10107849]


A very easy to remove propeller adapter transforms your Scaleglider in seconds from the electric model to a pure glider and back. Slight pressure on the Propadapter lock pin allows you to pull off the prop/adapter unit. The model is still a pure glider with the option for self-launch. Adaptable to various engines and models.
Easy installation without sawing the nose and thus maintaining the original look and the resale value
The FesEx-Uni8 shaft adapter does not protrude through the fuselage tip - not visible from the outside when the propeller is removed
Aerodynamically negligible - small prop adapter, closely fitting propeller blades
Safety for pilot, helper and spectator
Can be attached and removed from the outside within seconds without tools
Withdrawn propellers can be safely stowed away (e. g. in the fuselage or in the trouser pocket)
In the locking device, a pull line can be clicked to the model to the starting point and retreat.
Made in Germany by Torcman

Specifications
maximal motor power: 3,5 kW
maximal RPM: 15000 rpm
Diameter snap-on sleeve in front: 12mm
Diameter ball bearing front: 32mm
for motor shaft with 8mm (Adapter for 5 and 6mm shaftdiameter available)
Propadapter wide: 31mm
Weight: 87g

Delivery contents
Set contains: Locking sleeve, ball locking bolt with prop adapter, frontframe incl. ballbearing, mounting sleeve


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x CC 05
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
3 x Black copper lacquer wire Ø0,2 mm (5 m)
4 x 30 cm BEC cable (male)
2 x 3 LiPo XH>EH adapter
3 x 30 cm BEC cable (female)
2 x CC 01
2 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x CC 02
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x Connector Sub-D 2+5 Male
3 x Copper lacquer wire Ø0,2 mm (5 m)
2 x Circlick securite
2 x APM2.6 Power module with 5.3V DC BEC
2 x CM-3
3 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x 5 LiPo XH>EH adapter
2 x 2 LiPo XH>EH adapter
2 x Connector CAN 15
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Cabel charger transmitter GRAUPNER
3 x BEC 3A FOXY
2 x CC 03
2 x 4 LiPo XH>EH adapter
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x DPS Switch JR/JR
1 x Dean "T" - Futaba Adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Connector Sub-D 2+5 Female
1 x Double conector with JR adapter and 200 mm extension
2 x Ferrita con funda
1 x Ferrita 27x14x7 mm
1 x DYNAMOMETER S-1580
1 x MPX-Dean "T" Adapter
1 x USB HLS prog. interface
1 x Adapter lead MPX/XT60
1 x Conector BEC female (10 pcs)
1 x Connectors banna oro 6,0 mm (M/F)
2 x Banna gold connector 2,5 mm (M/F)
2 x Gold antispark 4 mm plug
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x MPX Sub-D Adaptor
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
2 x 2 mm female connector (2 pcs) with safety connector
1 x XH male balance (4S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Conector BEC male (10 pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors banna oro 3,5 mm (M/F)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Conector Servo female 4 pines
1 x 30 cm DEANS female connector
1 x Connectors banna oro 3 mm (M/F)
1 x Connectors banna oro 2 mm (M/F)
1 x Oracover ROYAL RED 2m
1 x 800TVL CMOS camera for FPV
1 x Oracover light Grey 2m
1 x Extension 2/3 lipos JST/C
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x Pins M connect Multipin connectors AWG 20-24
2 x MAX BEC 2D plus EX
1 x ALU servo arm 3 mm shaft
1 x Servo MKS HV6120H
1 x 54 mm Futaba servo arm tandem with ball link
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Support FUEL DOT V3
1 x Hitec 20 mm servo arm
1 x HITEC 17 mm servo arm with ball link HITEC
1 x Servo Tester
1 x Futaba 24/30 mm servo pull-pull double arm with ball link
2 x Suncover 100cc Red
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x Piñones SAVOX SH-0350
1 x Servoarm SH-81, two sides, aluminium
1 x Servo HITEC D950 TW
1 x Servo SAVOX SV-1261 MG
1 x Servoarm Aluminium SH-82
1 x SAVOX SH 1290 MG servo digi
1 x Servo FUTABA SBL 471 SV
2 x SBEC 40
1 x Extension 5 lipos JST/C - JST
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Male connector for 10 pines AWG
1 x SPS Remote switch actuator
1 x EWC3 40 cm wing connector
2 x PSC 5
2 x Multi-adapter balancer JST - TP
2 x SPARK Switch 7.4v
2 x Long Switch On/Off micro
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Hacker X-Pro USB interface V2
1 x Female connector for 6 pines AWG
1 x SPS 70V 100/200 A
1 x Switc electronic 30 Amp
1 x Male Prolonger TP 4/5S
1 x Selfstart electronic switch
2 x PWC4 wing/fuselage connector for 4 servos
1 x 2 mm male connector (2 pcs) with safety connector
1 x XH male balance (5S) connector (2 pcs)
1 x Soporte carbono MR30 (2 pcs)
1 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x resin-hardener L-385 H-385 (625 g)
1 x DPSI Ampere battery backer
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Ferrita 14x8x5.5 mm
1 x White gelcoat 1 Kg
1 x Electric spoiler 300 mm (2 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Vacuum bag, 1200 mm x 50 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Conector JR Servo female (10 pcs)
2 x Conector XT-30 (hembra)
1 x XH LiPo extension lead
1 x Protector Connector MPX (1 pair)
1 x Conector XT-30 (macho)
1 x XH female balance (9S) connector (2 pcs)
1 x Conector JR Servo male (10 pcs)
1 x XH male balance (8S) connector (2 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x XH female balance (4S) connector (2 pcs)
1 x XH female balance (3S) connector (2 pcs)
1 x Conector FUTABA Servo female (10 pcs)
1 x Servo HITEC D954 TW
1 x FX three-position switched channel, long
1 x Servo HITEC HS-5485 HB Digi
1 x JETImodel Addcap 1640
1 x Servo HITEC HS-5087 MH
1 x Servo HITEC HS-85 MG
1 x Servo BMS-4112
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Charger LiPo Charger4
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Servo HITEC D625 MW
1 x Servo HITEC HS-225 BB
1 x Extension 5 lipos JST/C
1 x Servo HITEC D131 MW nano
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Servo HITEC HS-45 HB, servo box
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Servo Digital HITEC HS-5065 MG
2 x Extension 5 lipos JST - JST/C
1 x Servo HITEC D951 TW
1 x Magnetic Interruptor MULTIPLEX
2 x PSC 6
1 x Servo slow down unit (0,7-14,7 sec )
1 x Propeller RF CFK 14.5x14
1 x Multi-adapter balancer JST/C - TP
1 x SPARK Switch 5.9v
1 x Opto Gas Engine Kill Switch
1 x PowerBox SparkSwitch RS
1 x Extension 6 lipos XH > EH
1 x Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
1 x Turbo light spinner cap white 32mm
1 x TrainerCord (master-learner)
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x 3-blades 27x12 carbon prop Super Silence
1 x 
1 x 27x10 prop Super Silence
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Shaft for A60-XS-V2 (112,5mm)
1 x A60-6XS V4 28-Pole
1 x TP/TopFuel - XH 2/3S Adapter
6,801.19EUR
Manufacturers
Manufacturer Info
Hacker
Hacker Homepage
Other products
Languages
Español English
Currencies