17.45EUR

JETImodel Addcap 820
[HK22985482]

Description:
AddCAP 820 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your battery to your ESC need to be lengthened more than 20cm (8 inches).

In case the wires are longer, use one AddCAP 820 for each 20cm (8 inch) section. Another advantage of adding an additional capacitor is to reduce possible interference which may be caused by current moving through your power wires. Recommended for use with 2.5-6 mm2 (14AWG – 10AWG) wires.

Specificationes:
- Weight: 13 g
- Dimensions: 60x19x18 mm
- Input voltage max. 59 V
- Capacity: 820 mF

few units

Reviews

Customers who bought this product also purchased

TopFuel LiPo 20C-ECO-X 5000mAh 5S MTAG

few units

Quick Find

Shopping Cart

1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	XH male balance (5S) connector (2 pcs)
1 x	Conector BEC female (10 pcs)
1 x	Connectors DEANS (T)
1 x	XH female balance (5S) connector (2 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna oro 4 mm (M/F)
1 x	Gold antispark 4 mm plug
1 x	XH female balance (4S) connector (2 pcs)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Conector BEC male (10 pcs)
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
2 x	BALSA trip 3.0x5.0x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
2 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Horn 5/10 with M2 Bearing
1 x	Circlick securite
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	120x60 mm SLH KOVO wheel
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Blades 330mm
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Blade holder metal LAMA
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	DA-50R motor alumine support
1 x	Cylinder DA-50R, DA-100, DA-100L
1 x	Carburetor for DA150L/170
2 x	Motor Saito FG-60 R3, 60 cc
1 x	Motor Moki S 400 cc 5 cylinders
2 x	Carburator gasket MOKI
1 x	Baffles for Radial Moki S180/320 mm
1 x	Carburator Moki S 180
1 x	Carb Carrier, red DA-85, DA-100L and DA-120
1 x	BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x	Motor Saito FG-73 R5, 72.7 cc
1 x	Moki Exhaust Bend 200 mm
1 x	Motor MOKI S 350 cc 7 cylinder
1 x	Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA
1 x	Air filter MOKI
1 x	Carb Carrier, red DA-150L/170
1 x	Escape O-Ring ZIMMERMANN FG-84/90 R3
1 x	Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x	Aluminium-screw, M5x16mm Red
1 x	Moki Exhaust Bend 50VT
1 x	MOKI S250 Intake Bend
1 x	O-Ring SAITO FG-60 R3
1 x	Ball bearing middle DA-50/DA60/VM120B2
1 x	Ball bearing middle DA-120
1 x	Regler autostarter MOKIS250
1 x	Moki Carburetor Throttle Arm with Extension
1 x	Escape Moki 100 BVT
1 x	Cylinder for DA-85/170 (1 piece)
1 x	Towing hook <3m
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	25 mm reinforced hinge
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C

17,247.30EUR