17.00EUR

Hardener Aero EPH 161 (500 g)
[R11212505]

Hardener Aero EPH 161 (500 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	Adjustable launching hook
3 x	Fixed launching hook
1 x	Towing hook
1 x	SERVO HOLDER
1 x	Towing hook
2 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	ABS Strip 1.5x2.0x1000 mm
2 x	1/10 Pilot "Jimmy"
2 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	1/12 Pilot "Fighter"
2 x	Pilot "Dick" Legends Series (Slimline)
1 x	1/7 Pilot "Japanese"
1 x	ABS Strip 1.5x6.0x1000 mm
2 x	ABS I Strip 10x5x1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Strip ABS 2.0x5.0x1000 mm
2 x	1/12 Pilot "Tom"
1 x	Strip 2,5x1,25x330 mm
2 x	Pilot "Anthony" (Slimline)
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	1/4 Pilot "Heidi"
1 x	Strip ABS 2.0x8.0x1000 mm
2 x	Piloto jet 130 mm
2 x	1/12 Pilot "Cougar"
1 x	1/6 Pilot "Buddy"
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
3 x	1/6 Pilot "Garry"
1 x	Civilian pilot "Curt" size 9cm (Slimline)
2 x	1/6 Pilot "Tony"
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
2 x	ABS tube 6.0x4.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
2 x	ABS tube 5.0x4.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Extension silicon 100 cm (Futaba)
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Towing hook <3m
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x	Pilot "Adolf" Legends Series (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Optical RPM Sensor
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Carbon plate 350x150x3.0 mm
1 x	DYNAMOMETER S-1580
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
2 x	ABS tube 9.0x7.0x1000 mm
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	LOWER TOW HOOK
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	EXTRA NG 85" 2159mm red/white
1 x	ABS angle 2,0x2,0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	290 mm M5 Prop shaft
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	LASER 73" 1.85m (05) PILOT
1 x	EDGE 540-A 91" (2310 mm)
1 x	Turbina KINGTECH K55G4
1 x	Fod Guard 94x32 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pick up DA50/100/150
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium ignition bad (blue)
1 x	45 mm gas motor standoff
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Vacuum bag, 1200 mm x 50 m

8,491.61EUR