17.00EUR

Hardener Aero EPH 161 (500 g)
[R11212505]

Hardener Aero EPH 161 (500 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	Ventus 1:4 set of instruments
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Extension MPX-MPX 20 cm
1 x	Turbina KINGTECH K320 G5
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Medidor ángulos y/o incidencias
1 x	ABS I Strip 10x5x1000 mm
1 x	Angle measurer
1 x	Surface Indicator Gauge Small
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Field folding model stand
1 x	Round Rod 3,0x1000 mm
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Z Bender - S Type Tool
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Support ECU Xicoy X-45
1 x	Support Pitot JETI
1 x	USB Adaptor OPTronics
1 x	Propeller POWER-PROP 7x7
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
2 x	120x60 mm SLH KOVO wheel
1 x	LOWER TOW HOOK
2 x	Conector MR-60 (pareja)
1 x	Oracover Black 10 m
2 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	Racor 2/3 mm
1 x	X-RAY Micro QR
1 x	X-RAY Micro QR (Tail Tube)
1 x	Field folding model stand SebArt
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	WingFix ULTRA Black Edition
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x	Sanyo RX Battery Eneloop 4,0 V AAA JR
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x	Rubber profile 10-2 mm 2M
1 x	Profile ABS half cane 3x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Rubber profile 8-2 mm 2M
1 x	Pin hinge 39x20 mm (10 uds)
2 x	SKY RC T400Q Charger 4x100w
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Glow starter with charger 230v
1 x	Engine mounts for .09 - .19 engine
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	USB Charger 12V DC for car
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Ciano KAVAN Medium 20g
1 x	Kavan Car 25% nitro 1l
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Charger SKY RC e680
1 x	Fuel bottle 500 ccm
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Glow Plug Clip 1.3 Ah
1 x
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	BETA 1400 RTF Red
1 x	BETA 1400 ARF Red
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Pin hinge 34x16 mm (10 uds)
1 x	10 mm aluminium spinner (Kavan)
1 x	Suncover 100cc Red
1 x	Ply-Span 450x600/13g Orange
1 x	Conector MT-60 (pair)
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
2 x	Adaptadores carga 6s JST-XH
1 x	XT60 Connector with Holder Male 2pcs
1 x	KAVAN CA Activator 150ml
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Ball Bearing Oil 25 ml
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	USB Charger 120-240V AC
1 x	Charger SKY RC D200 neo
1 x	SKY RC Temperature Sensor
1 x	Soporte filtro FESTO (4 pcs)
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Bags de Luxe ULTIMATUM 2.0
1 x	Threaded coupler M2 (10 uds)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Release wax 250ml
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	EasyFLY Addon
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Hopper 125 ml XICOY with support
1 x	LASER 73" 1.85m (05) PILOT
1 x	Propeller APC 14x8.5 Electric Pusher
1 x	PC-21 2.880 mm SINGAPUR scheme
1 x	Jet Pipe for ASPIRE 2m JMF
1 x	Propeller POWER-PROP 14x9
1 x	L-39 Albatros Scale 1:4.75 1991 mm
1 x	F9F COUGAR Red ARF 1.562 mm
1 x	PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x	Electric Landing Gear ASPIRE
1 x	FELIX JR Yellow/Black 1750 mm
1 x	Electric Landing Gear GALEB G4
1 x	PC-21 2.880 mm BLUE French Army Scheme
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Electric Landing Gear F9F COUGAR
1 x	Tank GFK Opus/JEt 300 ml
1 x	Oracover GREY Seafire Sea 2m
1 x	Prop Holder AXI 41xx V2
1 x	PC-21 2.880 mm RAAF Sheme
1 x	Set transmisions ULTIMATUM 2.0 (dura/aluminium)
1 x	Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
1 x	3 mm Long Prop Adapter M5
1 x	Adapter 3,0 mm M6
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Cable Cargador FUTABA
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	4 LiPo XH>EH adapter
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Digital scale up to 40 kg
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)

25,010.06EUR