28.34EUR

Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
[R74141311-S]

Wing-connector with GRP + CRP tube

The Wing-connector system consists of one GRP wing joining tube (outside) and one CRP wing tube (inside), they are high quality made and accurately fitting. The GRP tube fits completely over the CRP tube, the wing-connector is therefore telescopic.

Carbon fiber semi-finished tube - light weight, high strength, excellent corrosion and heat resistance and electrical conductivity. High quality epoxy resin matrix

Dimensions:
- GRP tube (outside tube) outer-Ø (oder outside diameter) 13.7 mm, wall thickness 0.6 mm
- CRP tube (inside tube) outer-Ø (oder outside diameter) 12.5 mm, wall thickness 0.9 mm

- Tolerance: ca. ± 0.3 mm
- Weight: approx. 113 g

Application:
Wing-connector system for big model airplanes, e.g. it is used to plug the wings onto the fuselage.

This system can only be delivered complete, the individual tubes are not available.

under request

Reviews

Customers who bought this product also purchased

Nylon hinge 15x0,3 (10 pcs) under request	Straightened rod Ø 4.0 mm x 1000 mm under request	Horn 16,5x20 mm (2 pcs) under request
Tailwheel for 1-3 kg models under request	Cockpit plastic closing under request	Canopy Latch under request

Quick Find

Shopping Cart

2 x	Extractor piñones 2.3/3.2 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
2 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	SIMtransmitter 6 Mode 2
1 x	EasyFLY Addon
1 x	Interface Jack Adapter IKARUS
1 x	Slave-cable USB Easy Sim
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Ventral support for AX-18/AX-60
1 x	Smoke set "Glider"
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 1,0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	HBC 10035-3 32-Bit
1 x	ESC ALPHA 60A HV
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	CC 11 Conector
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Stickers-digit for marking
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	EWC3 100 cm wing connector
1 x	DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV)
1 x	KIRA 500-26 6,7:1
1 x	KIRA 600-24 6,7:1
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	PVC 0,14 qmm servo wire Futaba (5 m)

3,219.76EUR