390.01EUR

Epoxy 40 min (Resin). 25Kg
[R1001353]

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

Suitable hardeners for Epoxy Resin L:

Hardener S
Potlife: 20 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 139-0 to 100 140-5

Hardener L
Potlife: 40 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 144-0 to 100 145-5

Hardener EPH 161
Potlife: 90 minutes
Mixing ratio: 100 : 25 parts by weight resin to hardener, 100 : 49 parts by volume resin to hardener
Order no. 112 123-5 to 112 125-4

Hardener EPH 500
Potlife: 60 minutes
Mixing ratio: 100 : 63 parts by weight resin to hardener, 100 : 71 parts by volume resin to hardener
Order no. 100 147-2 to 100 147-8

Hardener W 300
Potlife: 300 minutes
Mixing ratio: 100 : 35 parts by weight resin to hardener, 100 : 42 parts by volume resin to hardener
Order no. 100 149-4 to 100 149-7

Hardener GL 1
Potlife: 30 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 095-3 to 104 095-7

Hardener GL 2
Potlife: 210 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 100-3 to 104 100-7

Hardener CL
Potlife: 60 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 109 285-H-3 to 109 285-H-6

Please order hardener separately

under request

Reviews

Quick Find

Shopping Cart

2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Buy Perforated film 100 cm / 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	CA Glue fast 20g
2 x	Buy Perforated film 100 cm / 50 m
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
3 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Buy Perforated film 100 cm / 20 m
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
4 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
3 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
2 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
2 x
2 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	Demoulding wedge red (40 x 20 mm) 5 pcs
2 x	Latex Gloves GRIP, size L, box/ 100 pcs
2 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x	Epoxy 5 min. 500 g (Resin)
1 x	Carbon roving DowAksa / 24k / 1600 tex
2 x	Release wax 250ml
2 x	Glass fibre sleeve Ø 20 mm
2 x	CA Glue (medium) 20g
1 x	Chopped glass fibre strands 3 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Universal Colour Paste deep black 50 g
2 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Chopped glass fibre strands 3 mm
2 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
2 x	MEKP Harderner 100 g
1 x	Epoxy 5 min. 200g
1 x	Epoxy Resin L + Hardener LT kit/ 3125g
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
2 x	Epoxy Resin L + Hardener LT kit/ 895g
2 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Epoxy 40 min (Resin). 5 Kg
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Epoxy 40 min (Hardener). 10Kg
1 x	Epoxy 40 min (Resin). 25Kg
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	120x60 mm SLH KOVO wheel
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Epoxy 5 min. 500 g (Hardener)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Epoxy L 40 min. 10 kg (Resin)
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
2 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
2 x
2 x	Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
2 x	Glass fabric 425 g/m² aero,10x1m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Universal Colour Paste white 50 g
1 x	Colormatic 2K Soft fine putty white, 1 kg
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Hardener Aero EPH 161 (250 g)
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Mould Resin P 10 kg
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Profile ABS Square 4 x 1000 mm
1 x	Propeller APC 11x5.5 Electric Pusher
1 x	Flap hinge (6 pcs)
1 x	3,0x60 mm allen screwdriver
1 x	Piloto jet 130 mm
1 x	Oracover Black 2 m
1 x	Glases Innovation Plus
1 x	Propeller FIALA 15x8 3-Blade
1 x	Glases Moritz
1 x	Support XT60 conector (2 pcs)
1 x	Propeller APC 11x7 SF
1 x	Oracover Red 2 m
1 x	1/10 Pilot "Jimmy"
1 x	Support FUEL DOT V3
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Ply-Span 450x600/13g White
1 x	Hot Glue Stick RED
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Copier 5x20 cm pcs
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	L-Connector 4.0 mm x 1000 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Propeller APC 10x5.5 MR Electric multirrotor
1 x	Micro flex hinge (12 uds)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Oracover Yellow CADMIO 2 m
1 x	Xoar Electric Beechwood Prop 20x10
1 x
1 x	Couple M4 for wire (10 pcs)
2 x	Angled clevis with threaded rod M3
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Oracover Yellow CUB 2 m
1 x	PPM Encoder Module
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Blade holder metal LAMA
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Xplorer1 anemometro
1 x	SE Ring 250 mm (2 pcs)
1 x	Xoar Electric Beechwood Prop 16x7
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Digital scale up to 40 kg
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Propeller APC 10x4.7 SF Pusher
1 x	Propeller APC 10x4.7
1 x	18 mm reinforced hinge
1 x	Xplorer4 anemometro
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oratex Red Fokker 10 m
1 x	25 mm reinforced hinge
1 x	Glases Nimbus "Black"
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Spikes Band (5 m)
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	PIX Hawk with accesories
1 x	Propeller APC 12x8 Electric
1 x	Oracover Black 10 m
1 x	Profile ABS Square 2 x 1000 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	1/4 Pilot "Heidi"
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Pilot "Goose" (Slimline)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Propeller APC 13x4 Electric Pusher
1 x	Propeller APC 10x7 SF
1 x	Oratex Natural White 2m
1 x	Small pinned hinge (12 uds)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Soporte filtro FESTO (4 pcs)
1 x	Starter Sullivan-STAR 601
1 x	Propeller APC 12x6 SF
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Propeller hub spacer 8/5.5
1 x	Ball Link Plier
1 x	SE Ring 200 mm (2 pcs)
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	2,5x60 mm allen screwdriver
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Oracover Azul 2 m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Propeller POWER-PROP 7x7
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Support pump Xicoy X45
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Oratex Antik 2m
1 x	Cut tube
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Propeller APC 10x6 Electric Pusher
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Carbon plate 350x150x5.0 mm
1 x	Carbon plate 1000x500x2,0 mm ECOTECH
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Fiberglass plate 620x540x0,2 mm
1 x	Landing gear strap medium (4 uds)
1 x	Tail gear set (60-120 class)
1 x	28 mm tailwheel unit
1 x	Neumatic retractable landing gear (Aero-Naut)

16,625.26EUR