11.00EUR

Hardener Aero EPH 161 (250 g)
[R1121250]

Hardener Aero EPH 161 (250 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	Xplorer2 anemometro
1 x	Xplorer4 anemometro
1 x	Xplorer1 anemometro
1 x	Xplorer3 anemometro
2 x	Interface Realflight Simulator
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
2 x	EasyFLY Addon
1 x	Interface Jack Adapter IKARUS
2 x	Propeller balancer
3 x	WingFix ULTRA Black Edition
2 x	Medidor ángulos y/o incidencias
2 x	Truck-trailer for gliders 720 x 239 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
2 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Oratex White 2m
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
2 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Trike XL motor set (motor+esc+prop)
1 x	SIMtransmitter 6 Mode 2
2 x	RF9 Flight Simulator with Spektrum Controller
1 x	Telemetry interface ALTIS 12 cm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Field folding model stand SebArt
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Angle measurer
1 x	Propeller balancer
1 x	Field folding model stand
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Aramid 50 daN 50 m
1 x	Sun Cover PC 21 XXL (JMB Jets)
2 x	Slave-cable USB Easy Sim
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Keypad ALTIS V4
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Red smoke canister 65 g
1 x	Straightened threaded rod M2-1m
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm

3,055.19EUR