4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock
Propeller MENZ-S 23x8 temporarily out of stock	Conector BEC male (10 pcs) temporarily out of stock	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) temporarily out of stock

Quick Find

Shopping Cart

1 x	Extinguisher CO2 - 2 Kg
1 x	Ferrita 27x14x7 mm
1 x	Vasa model Catapult
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x	SE Ring 300 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x
1 x	SE Ring 330 mm (4 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Spikes Band (5 m)
1 x	Foil for sticking flaps and ailerons
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 450 mm (2 pcs)
2 x	Tape GFK 38 mm
2 x	SE Ring 400 mm (2 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Tape GFK 25 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Propeller balancer
1 x	Initior Receiver FRX2 Wireless
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	102 mm INO spinner (carbon imitation)
1 x	Aluminium sheet 500x250x0,5mm
2 x	40,0 mm hydro-propeller (left hydropropeller)
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Coupling bush 5 - 5 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Fiberglass landing gear for 140-160
1 x	Ring 320 mm length (5 pcs)
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Legs + electric brakes for Viper Jet 90
1 x	Nose leg 155 mm with wheels 70 mm
1 x	Fixed launching hook
1 x	LOWER TOW HOOK
1 x	Adjustable launching hook
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	Propeller 3x3
1 x	Propeller 3x2
1 x	Propeller 9x7 SlowFlyer
1 x	Propeller 8x4 Electric
1 x	SERVO HOLDER
1 x	Tow hook for tug
1 x	Towing hook
1 x	Towing hook
1 x	Towing hook <3m
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Manometer 4 mm
1 x	Receiver replacement antenna, approx. 15
1 x	Mini Infrared Thermomiter
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Distanzstück motor OS 120 AX
1 x	Charger LiPo Charger4
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Receiver replacement antenna, approx. 85
1 x	Conector JAPAN G2 Set 5 pares
1 x	Canopy Latch
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2.4EX Central Box 320
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	3-blades 20x12 carbon prop Super Silence
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	3-blades 28x12 carbon prop Super Silence
1 x	30x14 prop Super Silence
1 x	28x12 prop Super Silence
1 x	29x12 prop Super Silence
1 x	CA Glue (medium) 20g
1 x	CA Glue fast 20g
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)

4,811.06EUR