17.00EUR

Hardener Aero EPH 161 (500 g)
[R11212505]

Hardener Aero EPH 161 (500 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
2 x	Ball link M3 (10 pcs)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
2 x	Ball link M1.6 (6 uds)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
2 x	Stickers-digit for marking
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
2 x	6 mm hexagonal ball link M3 (10 pcs)
2 x	M2,5 5Diam metal ball link V3 (2 pcs)
2 x	Short ball link M2 (6 uds)
1 x	Long ball link M2 (6 uds)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Joint with bearing M3 22x5,5
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
2 x	Ball link M2,5 (10 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Long ball link M1.6 (6 uds)
1 x	Short ball link M1.6 (6 uds)
2 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
3 x	Ball link M3 (6 uds)
1 x	Short ball link M3 (6 uds)
2 x	Ball link M2 (10 pcs)
1 x	M3 Maxi ball link (2 uds)
2 x	Socket head ball link M3 (2 uds)
2 x	Strip 2,0x2,0x330 mm
2 x	Strip 3,5x1,75x330 mm
4 x	Strip ABS 2.0x3.0x1000 mm
4 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
2 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
2 x	ABS Strip 1.5x8.0x1000 mm
3 x	ABS I Strip 20x10x1000 mm
3 x	ABS Strip 1.5x2.0x1000 mm
2 x	ABS Strip 1.5x3.0x1000 mm
3 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
2 x	Round Rod 1,5x1000 mm
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Round Rod 3,0x1000 mm
2 x	Windsock Ozone L - 700 mm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Windsock Ozone L -1200 mm
1 x	Parachute P4
2 x	Opale Rucksack
1 x	Rescue 1,8m2 / BackPack
2 x	Parachute BACKUP X100
1 x	Parachute PV6 for F3J
1 x	Wing OXY 5,0 m2
1 x	Para-RC Trike "RC-Bullix"
1 x	LUCAS pilot ARTF
1 x	Wing OXY 0,5 pulgadas2
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Propeller balancer
1 x	Motor A2212/13T
1 x	Ball link M3 (10 pcs, flat ball)
2 x	M3 INDUSTRIAL ball link (2 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x	Round Rod 5,0x1000 mm
3 x	ABS Strip 1.0x2.0x1000 mm
3 x	Round Rod 2,5x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Spring Clip Ø25 mm
1 x	Sparkplug DLE CM6
1 x	ABS I Strip 10x5x1000 mm
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
2 x	Giant Scale Muffler D.A. 70
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Sparkplug Saito 400
2 x	Strip 2,5x1,25x330 mm
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	Sparkplug Champion RCJ-7Y for ZG
1 x	Sparkplug NGK CM6
1 x	Round Rod 4,0x1000 mm
1 x	Sparkplug ROSSI R8
1 x	Distanzstück motor OS 120 AX
1 x	Spark motor OS nº 3
1 x	O-ring Saito FG-73 5cyl
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	MEKP Harderner 100 g
2 x	PIX Hawk with accesories
2 x	Tube Pitot to PIXHAWK
1 x	BULL MØ1 2.600mm GREEN
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	BULL MØ1 2.600mm BLUE
1 x	BULL MØ1 2.600mm RED
1 x	BULL MØ1 2.600mm YELLOW
1 x	BULL MØ1 2.600mm "AeroPANDA"
1 x	Paramotor BackPack XXS (without accessories)
1 x	Aramid 50 daN 50 m
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Paramotor Trike XL
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Concave-Convex sandpaper file 13 mm
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Debonder CA 20g
1 x	Ball Bearing Oil 25 ml
1 x	Conector MT-60 (pair)
1 x	Ciano KAVAN Medium 20g
1 x	BETA 1400 ARF Red
1 x	Ciano KAVAN Super Thin 20g
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x
1 x	Adaptadores carga 6s JST-XH
1 x	45 mm aluminium spinner (Kavan)
1 x	Charger SKY RC e680
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Crawler GRE-24 RTR 1:24 Arena
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Blade holder metal LAMA
1 x
1 x	Ciano KAVAN Thin 20g
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	150 mm inflatable superlight deluxe wheel (2 pcs)
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	50 mm aluminium spinner (Kavan)
1 x	Conector MR-60 (pareja)
1 x	Cable coupler M3 (10 uds)
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	M3 Maxi ball link (2 uds)
1 x	Dust collector for mould cleaning
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	DLE 111 pipe plug
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Screwdriver for Hexagon 1,27mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m

31,633.57EUR