Top » Catalog » R-G.de » R1071023

36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ballast 700gr OPALE
1 x LUCAS pilot ARTF
1 x Opale Rucksack
1 x Rescue 1,8m2 / BackPack
1 x Para-RC Trike "RC-Bullix"
2 x Para-RC Mix
1 x Paramotor Trike XL
2 x Paramotor BackPack XXS (without accessories)
1 x Trike XL motor set (motor+esc+prop)
1 x Para-RC "RC-Evo-Cross" Rescue
2 x Paramotor Kit Camo H1.5/ Ben Red
2 x Aramid 50 daN 50 m
1 x Bungee HLG Premium
1 x Windsock Ozone L -1200 mm
3 x Set cintas unión paracaídas 145 cm
1 x Wing OXY 5,0 m2
2 x Parachute P4
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Black silicone 0,25 mm² wire (25 m)
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Cable Cargador FUTABA
1 x 100m servo "Premium" wire (white/red/blue)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Cable set Premium™ MAXI "one4two"
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x 6 mm Quick clamp_S (10 pcs)
1 x 10 mm Quick clamp_L (6 pcs)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x 5 line servos wire black (1 m)
1 x Green silicone 0,25 qmm wire (50 m)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Horn 5/10 with M2 Bearing
1 x Cable control set
2 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Extra long horn 60x30
1 x Horn F3A de Titanium 16 mm (2 units)
1 x ABS tube 12.0x10.0x1000 mm
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
2 x ABS tube 7.0x5.0x1000 mm
1 x 6 mm blue aluminium threaded horn with patella
1 x Horn 13,5x16 mm (2 pcs)
1 x Nitroverdu 500 ml
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Universal Colour Paste deep black 50 g
1 x Universal Colour Paste deep black 250 g
1 x Field folding model stand SebArt
1 x Field folding model stand
1 x Propeller balancer
1 x Truck-trailer for gliders 720 x 285 mm
1 x Truck-trailer for gliders 720 x 239 mm
1 x LASER 73" 1.85m (05) PILOT
1 x Propeller POWER-PROP 14x9 Izda
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Propeller POWER-PROP 14x9
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x DUPLEX 2.4EX Central Box 210
1 x ABS angle 1.5x1.5x1000 mm
1 x "S" set for boats
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x CC 05
1 x 2 LiPo XH>EH adapter
1 x Concave-Convex sandpaper file 13 mm
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x MAX pilot ARTF
2 x Wing OXY 0,5 pulgadas2
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Hardener Aero EPH 161 (250 g)
1 x Soporte grifo FESTO (2 pcs)
1 x 18m Fitting barb
1 x 1/4 Pilot "Heidi"
1 x Support XT60 conector (2 pcs)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Vasa model Catapult
1 x Windsock Ozone L - 700 mm
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Spannlack 1000 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x ABS tube 3.0x2.0x330 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Universal Colour Paste white 50 g
1 x Plasti Dip Liquid Tape 429 ml black
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Solvent Plasti Dip 1000 ml
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x resin-hardener L-385 H-385 (1250 g)
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x 10 mm portholes (10 pcs)
1 x 10x7 tree blades propeller
1 x 3,2 mm Prop Adapter M6
1 x 3,2 mm Prop Adapter M6
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 15x7 tree blades propeller
1 x 250 mm / 16 mm Airbrakes
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x Vest clothes Hispano Aviación
1 x Shirt Hispano Aviación
1 x Propeller balancer
1 x Angle measurer
1 x Refueling Cap V3 Black
1 x Conector MR-60 (pareja)
1 x Motor KAVAN PRO 2225-1600
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x Epoxy 5 min. 500 g (Hardener)
1 x Epoxy 40 min. 4kg (Hardener)
1 x BULL MØ1 2.600mm BLUE
1 x ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x BULL MØ1 2.600mm GREEN
1 x TUNED PIPE for motors up to 40-60 & 70-85 cc
1 x Tube bender
1 x Epoxy 5 min. 500 g (Resin)
1 x L-39 Albatros 138"/3.5m lenght ARF
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x Parachute BACKUP X100
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
30,889.20EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies