4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Extension MPX-MPX 20 cm temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock
TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	CA Glue (medium) 20g temporarily out of stock

Quick Find

Shopping Cart

2 x	Ventus 1:4 set of instruments
1 x	Horn 5/15 with M2 Bearing
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Horn 13,5x16 mm (2 pcs)
2 x	Brass control horn M4 short for wire (4 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	20 mm carbon horn
1 x	Horn 5/10 with M2 Bearing
1 x	Horn with ball 55x40
1 x	Horn for flap control (1 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Cable with accesories
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Horn 6/27 with M3 Bearing
1 x	Small aluminium horn red (2pcs)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
2 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm
1 x	SUS wire 3m (nylon coated)
1 x	Profile ABS Square 2 x 1000 mm
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Covered closure or fairings
1 x	Electric spoiler 250 mm (2 pcs)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Locking cable tie 2.5x100 (uds)
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Canopy Latch
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Tow hook for tug
1 x	BALSA leading edge 8x10x1000 mm
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Glases Moritz
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn with ball 40x30
1 x	Support pumb/filter Xicoy X45
2 x	Blades 330mm
1 x	Landing gear frontal support 25x32x16
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Snap pin for micro clevis (10 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cable grommet Ø 6.4 mm (4 uds)
2 x	41x5,5 mm wires output (2 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Allen wheel collar M4x4
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Screw-lock connector M2 (2 uds)
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Cable grommet 9.5 mm (4 uds)
1 x	140 mm rods set for direction control
1 x	Profile ABS Square 1 x 1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Clip mini fixing for wing (2 pcs)
1 x	Towing hook
2 x	6 mm red aluminium threaded horn with patella
3 x	Towing hook
1 x	Horn F3A de Titanium 16 mm (2 units)
2 x	Extra long horn 60x30
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Tape GFK 25 mm
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	F3A carbon 95 mm spinner
1 x	LA500 nose
1 x	Cierva C30 Elevator
2 x	6 mm M3 variable inclined horn
1 x	LA500 freewheel bearing
2 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Cockpit aluminium closing 4.7g
1 x	Head upper part
1 x	Cierva C30 simulated motor
1 x	Blade holder lower
1 x	Spinner INOVA 45 mm White
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	51 mm INO spinner (carbon imitation)
1 x	Blade holder center GFK 0,5 mm
1 x	70 mm INO spinner (carbon imitation)
1 x	Head lower part
1 x	Battery plate
1 x	82 mm INO spinner (carbon imitation)
1 x	Spinner INO 75 mm Chrome (Imitacion metal)
1 x	45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Complet landing gear
2 x	LA500 housing-upper cyclic
1 x	Control horn long w/ball
2 x	Adjustable brass horn threaded M3
1 x	LA500 pre-rotation gear
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Horn mando long (2 pcs)
1 x	Baal link 4/14/4 (5 pcs)
1 x	LA500 Blades
2 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Landing gear frontal support 29x26x13,5
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Pushrod octagone 4/3
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Propeller electric carbon 10.5x6
1 x	Propeller POWER-PROP 14x10
1 x	Esc MasterBasic 70SB
1 x	6 mm aluminium horn with patella
1 x	5 mm M2 variable horn
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	Cockpit aluminium closing 5.4g
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Esc MasterBasic 40SB
1 x	Propeller electric carbon 6x5
1 x	LOWER TOW HOOK
1 x	A50 Backmountset complete
1 x	Propeller POWER-PROP 11x9
1 x	Axle for motor A30-XL V2
1 x	PT 16x10 E Propeller
1 x	PT 20x13 EL Propeller
1 x	Propeller POWER-PROP 10x7 Izda
1 x	Propeller electric carbon 9.5x6
1 x	Propeller electric carbon 10x8
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	Dumper propeller 6/8 mm
1 x	Propeller APC 14x8.5 Electric Pusher
1 x	Porpeller HUNTER 480
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Horn 6/20 with M3 Bearing
1 x	Oratex Natural White 20m
2 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
2 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	CA Glue fast 20g
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Digital scale up to 40 kg
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m

3,260.07EUR