29.50EUR

Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
[R1001101]

Epoxy Resin L and Hardener L 40 min. (1 Kg) 715g Resina / 285g Hardener

The resin system Epoxy Resin L + Hardener L yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres.

Low viscosity
Highly transparent
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) max. 76 °C (post-curing at 60 °C / 15 h)
High static and dynamic strength
Free of nonylphenol and DETA
Processing time: 40 minutes (100 g / 20 °C)
Mixing ratio:
100 : 40 parts by weight resin : hardener
100 : 45 parts by volume resin : hardener
It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
Hand laminating
Vacuum moulding
Press moulding
Expertise for the resin system Epoxy Resin L + Hardener L: this system is not cytotoxic (cell damaging), important for applications in medical purposes.
Mechanical properties (Neat resin after curing)
Flexural test
Flexural strength (DIN EN ISO 178): 111 MPa
Flexural modulus (DIN EN ISO 178): 2.960 MPa
Tensile test
Tensile strength (DIN EN ISO 527): 69 MPa
Elongation at break: 4.7 %
Compression test
Compressive strength (DIN EN ISO 1426): 91 MPa
PoxySystems® is a registered trademark of R&G
General information about the system "Epoxy Resin L" with Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2
* Low viscosity, free of solvents and fillers
* Fast impregnation of glass, aramid, carbon and natural fibres
* High static and dynamic strength (GL approval with the Hardeners GL 1 and GL 2 being present

Epoxy Resin L with the corresponding Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2 is the most commonly used laminating and adhesive resin in R&G`s delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Its low surface tension, good adhesion, and minimal curing shrinkage makes the Epoxy Resin L ideal for bonding wood, metal, foamed polystyrene like Styropor® etc. It can be processed in all of the customary methods, e.g. hand lay-up, pressure and vacuum impregnation, press moulding and filament winding.

under request

Reviews

Customers who bought this product also purchased

Epoxy SLOW-CURE™ 30 min (130g) under request	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll under request	Servo HITEC HSB-9380TH under request
Stainless steel cable Ø 0.5 mm (10 m) under request	Epoxy FINISH-CURE™ 20 min (130g) under request	Fuel tank fiberglass Easy Jet 2,2 l under request

Quick Find

Shopping Cart

1 x	Oracover CARBON Metalic 1 m
1 x	Female connector for 16 pines AWG
1 x	Male connector for 20 pines AWG
1 x	Male connector for 12 pines AWG
1 x	Female connector for 20 pines AWG
1 x	Glow starter with charger 230v
2 x	Universal Colour Paste deep black 50 g
1 x	Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	SKY RC T400Q Charger 4x100w
4 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
2 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
2 x	LOWER TOW HOOK
1 x	HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x	SERVO HOLDER
2 x	Motor DLE 200cc Premium Muffler
3 x	Propeller FALCON 32,5x11 PUSHER Carbono
2 x	Silent-blocks DLE 170M
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Landing gear Rocket 400
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	P 17×5.8 Prop-2PCS/PAIR
3 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	MPX-Dean "T" Adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Copper lacquer wire Ø0,2 mm (5 m)
3 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger transmitter GRAUPNER
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Crimping tool
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	5 LiPo XH>EH adapter
3 x	TrainerCord (master-learner)
1 x	Adaptadores carga 6s JST-XH
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Motor DLE 430 cc - Paramotors
1 x	12V Car Adapter
1 x	Vacuum bag, 1200 mm x 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x	57 mm micro-mini servo cover
1 x	Pilatus PC-21 50E RED/WHITE (SebArt)
1 x	Propeller Pleg CAM Carbon 10x4
1 x	Propeller Pleg CAM Carbon 11x4
1 x	Servo GO-02 Digital 1.8g
3 x	SERVO DES 588 BB MG
2 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Cyanocrylate MD GA460 odourless 20g
2 x	MIG 29 3D RTF, Servo
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
2 x	CA Glue (medium) 20g
1 x	Aluminium servo arm (2 uds)
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
2 x	CA Glue fast 20g
1 x	Horns set HS-65HB/MG, 5065MG
2 x	Metal gear set for HS81MG/5082MG
2 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x	Metal gear set for HS85MG/5085MG
3 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
3 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Servo TT ACE SHV 1504 MG
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x	Digital scale up to 40 kg
3 x	Fast attachment for servos (25 pcs)
1 x	Servo arms set HS-60/81/85/5082MG/5085mg
2 x	Hardener Aero EPH 161 (500 g)
1 x	Servos security connector (2 pcs)
2 x	Carbon roving DowAksa / 24k / 1600 tex
2 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	18 mm wing servo holder
1 x	Servo TOPMODEL DS1413 T
2 x	Servo TOPMODEL S7520 MG
2 x	13 mm wing servo holder
2 x	90x75 mm standart servo cover
2 x	Servo TOPMODEL STANDARD S3217
2 x	58 mm micro servo cover
2 x	65 mm mini servo cover
1 x	Fundas para el transporte F3A alas
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	ZEUS F3A 2m
1 x	Propeller Pleg CAM Carbon 10x7
1 x	Propeller Pleg CAM Carbon 13x10
1 x	Propeller Pleg CAM Carbon 10x12
1 x	Propeller Pleg CAM Carbon 15x10
1 x	Propeller Pleg CAM Carbon 10x7 Reverse Rotation
1 x	Propeller Pleg CAM Carbon 11x10
1 x	LASER 73" 1.85m (05) PILOT
2 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	Propeller set 400 (2R+2L)
1 x	EDGE 540-A 91" (2310 mm)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
2 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Hardener Aero EPH 161 (250 g)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	Interruptor SPS 70v 60/120A
1 x	Magnetic Interruptor MULTIPLEX
1 x	7-Cylinder 35cc 4-Stroke Glow Radial Engine
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
2 x	Battery charging cable XT60
1 x	Motor DLE 111 cc
1 x	Gasket cylinder / insulator for ZG 38/S/SC
1 x	Regler autostarter MOKIS250
1 x	Piston ring for DLE-30
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	resin-hardener L-385 H-385 (5000 g)
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	resin-hardener package L-385 with hardener H-385
2 x	CC 01
1 x	BEC 3A FOXY
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Stainless Steel Bend D 22x0,5mm
1 x	L ELBOW 90º ø 25 mm
2 x	PSC 6
1 x	Giant Scale Muffler D.A. 150 (2 pcs)
1 x	Giant Scale Muffler D.A. 170 (2 pcs)
1 x	Tufnol Choke Lever Arm d=4,7mm
2 x	PSC 5
1 x	Opto Gas Engine Kill Switch
1 x	SPS 70V 140/280 A
2 x	Extension 5 lipos JST - JST/C
2 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Long Switch On/Off micro
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
2 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Silencer Ring 7-35
1 x	Prop shaft ZG 23SL and ZG 26SC
1 x	20-25mm Servo Arm
1 x	Motor Moki S 250 cc 5 cyl with autostarter
1 x	Motor DLE 130 cc
1 x	Motor Moki 180
1 x	Sparkplug Champion RCJ-7Y for ZG
1 x	Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x	Carburetor for ZG45SL and ZG62/S/SL
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Moki Carburetor Throttle Arm with Extension
1 x	DLE-55RA Ignition unit
1 x	Carburetor DLE 30
1 x	Piston ring for DLE-55/111/222
1 x	Canister combo DLE 111 cc
1 x	Muffler DLE-120 Right
1 x	Cilinder DLE 30 - DLE 60
1 x	Motor DLE 170 M- Paramotors
1 x	DLE Ignition 111/120/170
2 x	Male connector for 6 pines AWG
1 x	Epoxy 5 min. 200g
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
2 x	Servo HBS 690BB HV Digital
1 x	Servo JETI DSHV 3D13T (13 Kg)
2 x	SERVO DES 707 BB MG, Pignons
1 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
2 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon fiber rod 1.5 mm x 2000 mm
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Epoxy L 40 min. 10 kg (Resin)
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	120x60 mm SLH KOVO wheel
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Connector Sub-D 2+5 Female
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	CC 03
1 x	30 cm BEC cable (male)
1 x	Glass fabric 425 g/m² aero,10x1m
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
2 x	SERVO DES 568 MG
2 x	SERVO DES 806 Pignons
2 x	Servo arms set 40/50/55/5055 MG
1 x	Servo DL3017 Digi 17Kg-0.15s/60º
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Glass fibre sleeve Ø 20 mm
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	90x60 mm standart servo cover
1 x	Oracover light Grey 2m
1 x	USB interface ALTIS
1 x	CC 05
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Interruptor RX/Batterie
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Extension 2/3 lipos JST/C
1 x	CC 02
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	AXI 2820/12 CYCLONE
1 x	30 cm BEC cable (female)
1 x	2 LiPo XH>EH adapter
1 x	Glass fabric 49 g/m² (1,27 x 5 m)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Epoxy 10 min 190g
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Epoxy 40 min (Resin). 25Kg
2 x	Epoxy 5 min. 500 g (Hardener)
1 x	Epoxy Resin L (2.5 Kg)
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	50x45 mm micro-mini servo cover
1 x	Servo TOPMODEL DS9010 T
2 x	SERVO DES 658 BB MG
2 x	Soporte metal para servos
2 x	SERVO DES 806 Pignons
1 x	SERVO DES 707 BB MG
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Servos wing assembly set HS 80/81/82/85
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	Buy Perforated film 100 cm / 50 m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Servo arms set HS-65HB/MG/5065MG
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Universal Colour Paste deep black 250 g
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)

44,999.42EUR