36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]

Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Oracover CARBON Metalic 1 m
1 x	Female connector for 16 pines AWG
1 x	Male connector for 20 pines AWG
1 x	Male connector for 12 pines AWG
1 x	Female connector for 20 pines AWG
1 x	Glow starter with charger 230v
1 x	Universal Colour Paste deep black 50 g
1 x	Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	SKY RC T400Q Charger 4x100w
2 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
2 x	LOWER TOW HOOK
1 x	HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x	SERVO HOLDER
2 x	Motor DLE 200cc Premium Muffler
3 x	Propeller FALCON 32,5x11 PUSHER Carbono
2 x	Silent-blocks DLE 170M
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Landing gear Rocket 400
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	P 17×5.8 Prop-2PCS/PAIR
3 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	MPX-Dean "T" Adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger transmitter GRAUPNER
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Crimping tool
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	5 LiPo XH>EH adapter
3 x	TrainerCord (master-learner)
1 x	Adaptadores carga 6s JST-XH
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Motor DLE 430 cc - Paramotors
1 x	12V Car Adapter
1 x	Vacuum bag, 1200 mm x 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	57 mm micro-mini servo cover
1 x	Pilatus PC-21 50E RED/WHITE (SebArt)
1 x	Propeller Pleg CAM Carbon 10x4
1 x	Propeller Pleg CAM Carbon 11x4
1 x	Servo GO-02 Digital 1.8g
1 x	SERVO DES 588 BB MG
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	MIG 29 3D RTF, Servo
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	CA Glue (medium) 20g
1 x	Aluminium servo arm (2 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
1 x	CA Glue fast 20g
1 x	Horns set HS-65HB/MG, 5065MG
1 x	Metal gear set for HS81MG/5082MG
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Metal gear set for HS85MG/5085MG
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Servo TT ACE SHV 1504 MG
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Digital scale up to 40 kg
1 x	Fast attachment for servos (25 pcs)
1 x	Servo arms set HS-60/81/85/5082MG/5085mg
1 x	Hardener Aero EPH 161 (500 g)
1 x	Servos security connector (2 pcs)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	18 mm wing servo holder
1 x	Servo TOPMODEL DS1413 T
1 x	Servo TOPMODEL S7520 MG
1 x	13 mm wing servo holder
1 x	90x75 mm standart servo cover
1 x	Servo TOPMODEL STANDARD S3217
1 x	58 mm micro servo cover
1 x	65 mm mini servo cover
1 x	Fundas para el transporte F3A alas
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	ZEUS F3A 2m
1 x	Propeller Pleg CAM Carbon 10x7
1 x	Propeller Pleg CAM Carbon 13x10
1 x	Propeller Pleg CAM Carbon 10x12
1 x	Propeller Pleg CAM Carbon 15x10
1 x	Propeller Pleg CAM Carbon 10x7 Reverse Rotation
1 x	Propeller Pleg CAM Carbon 11x10
1 x	LASER 73" 1.85m (05) PILOT
2 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	Propeller set 400 (2R+2L)
1 x	EDGE 540-A 91" (2310 mm)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Hardener Aero EPH 161 (250 g)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	Interruptor SPS 70v 60/120A
1 x	Magnetic Interruptor MULTIPLEX
1 x	7-Cylinder 35cc 4-Stroke Glow Radial Engine
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
2 x	Battery charging cable XT60
1 x	Motor DLE 111 cc
1 x	Gasket cylinder / insulator for ZG 38/S/SC
1 x	Regler autostarter MOKIS250
1 x	Piston ring for DLE-30
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	resin-hardener package L-385 with hardener H-385
1 x	CC 01
1 x	BEC 3A FOXY
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Stainless Steel Bend D 22x0,5mm
1 x	L ELBOW 90º ø 25 mm
1 x	PSC 6
1 x	Giant Scale Muffler D.A. 150 (2 pcs)
1 x	Giant Scale Muffler D.A. 170 (2 pcs)
1 x	Tufnol Choke Lever Arm d=4,7mm
1 x	PSC 5
1 x	Opto Gas Engine Kill Switch
1 x	SPS 70V 140/280 A
1 x	Extension 5 lipos JST - JST/C
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Long Switch On/Off micro
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Silencer Ring 7-35
1 x	Prop shaft ZG 23SL and ZG 26SC
1 x	20-25mm Servo Arm
1 x	Motor Moki S 250 cc 5 cyl with autostarter
1 x	Motor DLE 130 cc
1 x	Motor Moki 180
1 x	Sparkplug Champion RCJ-7Y for ZG
1 x	Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x	Carburetor for ZG45SL and ZG62/S/SL
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Moki Carburetor Throttle Arm with Extension
1 x	DLE-55RA Ignition unit
1 x	Carburetor DLE 30
1 x	Piston ring for DLE-55/111/222
1 x	Canister combo DLE 111 cc
1 x	Muffler DLE-120 Right
1 x	Cilinder DLE 30 - DLE 60
1 x	Motor DLE 170 M- Paramotors
1 x	DLE Ignition 111/120/170
2 x	Male connector for 6 pines AWG

38,262.32EUR