11.00EUR

Hardener Aero EPH 161 (250 g)
[R1121250]

Hardener Aero EPH 161 (250 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

2 x	U Profile ABS 2,0x4,0x1000 mm
2 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
2 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
2 x	T-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x
1 x	Starter 12v (Max 90 and 15ccm)
3 x	Ball Link Plier
1 x	Vacuum pump 12 CFM
1 x	Hot Glue Stick RED
1 x	Starter EM Gear Power 250
4 x	Servo NARO Max Std
1 x	Digital scale up to 40 kg
1 x	Z Bender - S Type Tool
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x	Vacuum pump P1-N
1 x	Screwdriver for Torx® TX6
1 x	1,5x50 mm allen screwdriver
2 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Ply-Span 450x600/13g Orange
1 x	Nitroverdu 500 ml
1 x	Red smoke canister 65 g
1 x	SkyMaxx 1.550 mm (kit)
1 x	U Profile ABS 5,0x10,0x1000 mm
3 x	U Profile ABS 8,0x4,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Support conector MPX (6 pcs)
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Support XT60 conector (2 pcs)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Screwdriver for Hexagon 1,5mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Micro flex hinge (12 uds)
1 x	Starter 12v (Max 180 and 30ccm)
1 x
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x	Crimping tool
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Fixed launching hook
1 x	Towing hook <3m
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	PIT (Aero-Naut)
1 x	TWIST planeador gomas
1 x	Bird (Aero-naut)
1 x	CHALLENGER Indoor
1 x	Rigid coupling brass Ø 3 mm L: 20 mm
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	Spare Shaft Ø6mm L:450mm M5
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	Rudder 107-06
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x	Spare Shaft Ø4mm L:450x18mm M4
1 x	Kardan Black (without pinions)
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	8 mm Adapter for AXI53xx
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	BlueCom™ Adapter (iOS)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	20x15 Falcon electric V2
1 x	Propeller 12x6 Falcon electric
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Propeller 11x4,7 SlowFlyer
1 x	Recessed MPX connector support (6 pcs)
1 x	Sub-D Plug Mold
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Propeller diller for EME35 and DLE35
1 x	290x4 mm M4 shaft ship
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Welder 100W/200V
1 x
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Combo 4 pcs AXI 2204 Multicopter
1 x

4,781.18EUR