Top » Catalog » R-G.de » R1501032

4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Extension MPX-MPX 20 cm
Extension MPX-MPX 20 cm

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

CA Glue (medium) 20g
CA Glue (medium) 20g

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Propeller electric carbon 10x7
3 x Propeller electric carbon 8.5x7
3 x Propeller POWER-PROP 14x10
4 x PROPELLER ELECTRIC glass 9,5x6
4 x Propeller POWER-PROP 11x8
3 x Propeller POWER-PROP 10x7
3 x Propeller POWER-PROP 12x6
3 x Propeller electric carbon 9.5x7
3 x Dumper propeller 6/8 mm
3 x Propeller POWER-PROP 11x9
5 x Propeller POWER-PROP 12x8
2 x Propeller POWER-PROP 14x12
2 x Propeller electric carbon 6.5x4
2 x Propeller electric carbon 10x6
3 x Propeller POWER-PROP 15x8
4 x Propeller POWER-PROP 12x9
3 x Porpeller HUNTER 480
2 x Propeller POWER-PROP 15x10
2 x Propeller electric carbon 9.5x5
3 x Propeller POWER-PROP 13x8
3 x Propeller electric carbon 8.5x6
1 x Propeller electric carbon 10.5x7
3 x Propeller POWER-PROP 10x6
1 x Small aluminium horn blue (2pcs)
1 x Cable with accesories
1 x Brass control horn M3 short for wire (2 pcs)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x SlowFlyer control horn (3 pcs)
2 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Horn for flap control (1 pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Brass control horn M2 short for wire (2 pcs)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Small aluminium horn gold (2pcs)
1 x Bungee HLG Premium
1 x 1,5x50 mm allen screwdriver
1 x Starter Sullivan-STAR 601
1 x 2,5x60 mm allen screwdriver
1 x Screwdriver for Torx® TX6
2 x Crimping tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Starter EM Gear Power 250
1 x Starter 12v (Max 90 and 15ccm)
1 x 3,0x60 mm allen screwdriver
1 x Copier 2x20 cm pcs
1 x Crimping tool
2 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x 2,0x50 mm allen screwdriver
1 x Screwdriver for Torx® TX8
1 x Dust collector for mould cleaning
1 x Aero-Master Fuselage (Aero-naut)
1 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Ball Link M2 with Ball and Hardware, 10 pcs
2 x Propeller POWER-PROP 14x9 Izda
2 x Propeller POWER-PROP 7x7
2 x Support ECU Xicoy X-45
1 x Soporte filtro FESTO (4 pcs)
3 x 6x4 tree blades propeller
1 x Cap Hispano Aviación
1 x Vest clothes Hispano Aviación
2 x Propeller POWER-PROP 16x10
3 x Propeller POWER-PROP 11x6
2 x Propeller electric carbon 8.5x5
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Air pressure gauge
1 x Retract undercarriage
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Propeller POWER-PROP 9x6
1 x Manometer 4 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Glow starter with charger 230v
1 x Glow Plug Clip 1.3 Ah
1 x Propeller 12x6 Falcon electric
1 x ABS 500 x 400 x 1,5 mm (white)
2 x PVC plate 320 x 194 x 0.23 mm (brown)
2 x Sheet Depron Aero 1250x800x3 mm
1 x Chopped glass fibre strands 3 mm
1 x Foam plastic plates (310x210x2 mm)
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Pump hose (Ø 6/8 mm) transparent
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x Universal Filter
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x MPX plug mold V1
1 x Propeller diller for DLE170
1 x Sealing Iron Sleeve STD
1 x Schul-Malpinsel Gr.5
1 x Vacuum pump 12 CFM
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Tachometer Hyperion Multi-pala
1 x Tube support Ø 6mm (10 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support XT60 conector (2 pcs)
2 x Propeller electric carbon 10.5x8
1 x Propeller electric carbon 6x5
1 x 20,5x14,5 Falcon electric V2 (40 g)
1 x FIALA Propeller 19x12 Electric
1 x Support Filtro FESTO
1 x BOEING 727, Electric brake 28mm + controller
1 x BOEING 727, Retract set for Boeing 727
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Porpeller HUNTER 400
2 x Propeller POWER-PROP 13x10
2 x Propeller POWER-PROP 9x5
1 x 12x6 tree blades propeller
2 x Chopped glass fibre strands 3 mm
1 x 15x7 tree blades propeller LEFT
1 x Propeller electric carbon 10x8
1 x Propeller POWER-PROP 13x9 Izda
2 x Propeller electric carbon 7x7
1 x Propeller POWER-PROP 10x7 Izda
1 x Propeller POWER-PROP 13x9
1 x Propeller electric carbon 9.5x6
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Nose leg 155 mm with wheels 70 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x Styrene plate 320x120x1.0 mm
1 x ABS 500 x 400 x 0,5 mm (white)
1 x PVC grid straight 290x185x0.32 mm
1 x Foam plastic plates (310x210x3 mm)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x 4 mm Prop Adapter M8
1 x BlueCom™ Adapter (iOS)
1 x Extension for LC-Display 50cm
1 x PRO-HV Dual Action Valve
1 x Mini neumatic retract landing gear
1 x E_brakes electronics
1 x Adjustable brass horn threaded M3
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Fiberglass plate 350x150x0.3 mm
1 x Fiberglass plate 350x150x2.5 mm
1 x Film release agent PVA 25 ml
1 x Glass fibre sleeve Ø 20 mm
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Ventus 1:4 set of instruments
1 x Squared carbon wing joinner 5x5x220 mm
1 x Motor OS FS 95 AX
1 x OS Engine 105HZ-R Heli
1 x Extension for SensorSwitch 30cm
2 x Buy Perforated film 100 cm / 50 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
7,234.05EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies