4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Extension MPX-MPX 20 cm temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock
TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	CA Glue (medium) 20g temporarily out of stock

Quick Find

Shopping Cart

1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
3 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 4.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
2 x	ABS tube 6.0x5.0x1000 mm
4 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
2 x	ABS tube 6.0x4.0x1000 mm
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 20.0x18.0x1000 mm
2 x	ABS tube 18.0x16.0x1000 mm
2 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
3 x	Lock washer 2.2 mm (20 pcs)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
2 x	Lock washer 4.3 mm (20 pcs)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Aluminium wide washer M3 gold (4 pcs)
2 x	M3 black washers (4 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
2 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Flat washer 3.2 mm (20 pcs)
1 x	ABS tube 2.0x1.0x1000 mm
2 x	ABS tube 14.0x10.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x	Quicklock washer 2 mm (10 pcs)
3 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 5.0x3.0x1000 mm
3 x	Flat washer 2.2 mm (20 pcs)
1 x	Spray EC Red 400ml
3 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Spannlack 1000 ml
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Spray adhesive AEROFIX 2
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Spray YELLOW Inca Lexan 150ml
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	500 ml sealer (DOPE)
2 x	1000 ml sealer (DOPE)
1 x	Solvent Plasti Dip 1000 ml
1 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Release wax 250ml
1 x	Carbon fiber rod 1.5 mm x 2000 mm
3 x	Carbon fiber rod 20 mmx1000 mm
1 x	Presto SF Light Filler styrene-free (420 g)
3 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Universal Colour Paste deep black 250 g
2 x	20 g tin paste
2 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Painting GHT Lexan Black 150 ml
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Spray Graphit 33
1 x	Nitroverdu 500 ml
1 x	Hobbylite Filler, Balsa colour
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	1/4 Pilot "Mike"
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Straightened threaded rod M3 - 1m
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	PROFI Box JETI
1 x	Kontronik ProgUnit
1 x	Pan Head Screw M1,6x6 (10 pcs)
1 x	Nylon Screw M6x40
1 x	Nylon Screw M4x20
1 x	Screw M4x30 (10 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
2 x	Pan Head Screw M2x6 PH
2 x	Quicklock washer 1 mm (10 pcs)
2 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Screw KB 1.4x6 mm (10 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Socket Head Screw M2x10
1 x	Screw M2x6 (10 pcs)
1 x	Lock nut M4 (10 pcs)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Hexagonal Nut M3 (10 pcs)
1 x	DYMOND VTX UBS Programming adapter
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Servo M2x5/16 screw (4 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
2 x	Screw M2x8 (10 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Screw M3x16 (10 pcs)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Screws 2,2 x 6,5 mm (20 pcs)
1 x	Pan head screw M2x16 PH
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	Screw M2.5x5 (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	12 mm floating pad (49 pcs)
1 x	USBCOM 5i
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller)
1 x	Charger LiPo Charger4
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Rigid coupling brass Ø 5 mm L: 25 mm
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller)
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Propeller hub spacer 8/5.5
1 x	Conector JAPAN G2 Set 5 pares
1 x	Transmitter Crystal 35 Mc/s Ch 77
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	Spikes Band (5 m)
1 x	Rudder 107-06
1 x	Canopy Latch
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Decorative caps, multicoloured, short
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	PYRO 650-103 Long Axi
1 x	Epoxy 5 min. 500 g (Resin)
1 x	Ferrita con funda
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Screw M3x12 (10 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	HBC 10035-3 32-Bit
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	AXI 2820/10 V2 Long
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Socket Head Screw M2x8
1 x	KIRA 600-20 6,7:1
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	PYRO 900-52L
1 x	KIRA 480-38 5,2:1
1 x	KIRA 500-36 6,7:1
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Blind nut M5 (4 pcs)
1 x	KIRA 400-39 5,2:1
1 x	Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	Epoxy 5 min. 500 g (Hardener)
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Ferrita 14x8x5.5 mm
1 x	Stickers-digit for marking
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Cooler motor type 280
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	Screw M3x30 (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Size "M" motor holder for class 400
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m

5,330.23EUR