11.00EUR

Hardener Aero EPH 161 (250 g)
[R1121250]

Hardener Aero EPH 161 (250 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

2 x	Red smoke canister 100 g
2 x	B4-0 rocket charges (6 pcs)
1 x	White smoke canister 65 g
2 x	Smoke set "S"
2 x	3l Smoke oil
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Initior Receiver FRX2 Wireless
2 x	Blue smoke canister 100 g
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Long ball link M3 (6 uds)
1 x	Short ball link M1.6 (6 uds)
1 x	Joint with bearing M2 22x5,5
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Long ball link M2 (6 uds)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Ball link M1.6 (6 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Ball link M2 (10 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M3 RPA's-UAV's
1 x	Short ball link M3 (6 uds)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	PPM Encoder Module
2 x	Tube Pitot to PIXHAWK
3 x	PIX Hawk with accesories
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Glases Aspen
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Glases Ace
1 x	Glases Nimbus "Black"
1 x	Oracover Yellow CUB 10 m
1 x	Oracover GREY Seafire Sea 2m
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Cut tube
1 x	Extension silicon 30 cm female (Graupner)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Mobile Terminal
2 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Ventral support for AX-18/AX-60
1 x	"M" set
1 x	Green smoke canister 100 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	AX-60 starters (5 pcs)
1 x	Smoke set "Glider"
1 x	Blue smoke canister 140 g
1 x	White smoke bombs AX-9 (10 pcs)
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	FunCup XL RR
1 x	DRACO 2.0m Wheel set
1 x	CESSNA 50E White/Red
1 x	Receptor CORE PBR-26XS 26ch
1 x	A50 Motor Mount Alu complete set
1 x
1 x	FIALA Propeller 23x8 Electric
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Combo AM480 T-Motor 650 Kv
1 x	Frontal support Speed 400/480
1 x	Electric coversion set
1 x	Fan for A60
1 x	Motor mount for 1 m models
1 x	Ø 28 mm fiberglass motor-holder for electric motors
1 x	Size "M" motor holder for class 400
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x
1 x	Motor holder for AC 28/7
1 x	Size "L" motor holder for class 600
1 x	Receiver bed (Blue)
1 x	Motor holder AXI
1 x	Bearings for motor HACKER C50
1 x	Indoor motor holder
1 x	Motor mount M
1 x	Central support Speed 600
1 x	Frontal support Speed 280
1 x	Cooler motor type 150
1 x	Size "M" motor holder for class 400
1 x	Motor mount for 1200 mm models
1 x	Motor Mount for Multiplex FunJet
1 x	Metalic motor holder for class 550-600
1 x	Cooler motor type 300
1 x	Frontal support Speed 600
1 x	Motor KAVAN PRO 2225-1600
1 x	Propeller FIALA 15x8 3-Blade
1 x	Program card KAVAN PRO
1 x	FIALA Propeller 19x12 Electric
1 x	Glases Nimbus
1 x	Foaming agent for epoxy resins 200 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	CA Glue (medium) 20g
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	3 mm Leader (L 100 mm)
1 x	Telemetry interface ALTIS 20 cm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Release wax 250ml
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)

5,663.75EUR