18.52EUR

Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
[R1051000]

Epoxy Resin HT 2 + Hardener HT 2 (45 minutes), set of two components

Solvent- and filler-free, highly transparent laminating and coating system of very low viscosity with absolutely tack-free, glossy surface.
Highly transparent, almost water-clear
High degree of UV stability
Tack-free curing even of thin layers
Also for casting in layer thicknesses up to 5 mm in one operation
Free of nonylphenol
Epoxy Resin HT 2 is suitable for impregnating glass, aramid, and carbon fibres* and for bonding wood, metal, foamed polystyrene, etc..

*Owing to its low surface tension the system exhibits good filler absorption properties. And it has excellent wetting properties with respect to reinforcing fibres of glass, aramid, and carbon.
Epoxy Resin HT 2 is a laminating resin of very low viscosity based on bisphenol A/F. The bisphenol F component reduces the viscosity and prevents the resin from forming crystals at low storage temperatures (less than + 5 °C).
Epoxy Resin HT 2 is diluted with a difunctional reactive compound and is free of solvents and fillers.
The system is highly transparent and yields in conjunction with finished glass fabrics (Finish FK 144/FK 800) highly transparent laminates with good light fastness.

Processing time: 45 minutes
Mixing ratio:
100 : 48 parts by weight of resin to hardener
100 : 55 parts by volume of resin to hardener

Curing time: 24 hours
Cold curing

under request

Reviews

Quick Find

Shopping Cart

2 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
2 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Carbon fiber rod 20 mmx1000 mm
2 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Carbon fiber rod 14 mmx1000 mm
2 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
2 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
3 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
2 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
2 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Circlick securite
1 x	5 LiPo XH>EH adapter
1 x	1/10 Pilot "Jack"
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Support FUEL DOT V3
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Landing gear strap large (4 uds)
1 x	CA Glue fast 20g
1 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Profile ABS half cane 4x2.5x1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
2 x	Profile ABS half cane 5.0x1000 mm
1 x	Rubber profile 10-2 mm 2M
1 x	ABS angle 1.5x1.5x1000 mm
1 x	TMM 2512-3S heli
1 x	Blades 330mm
1 x	PPS-4D Propeller
1 x	9x4.7 * 22x12 carbon propeller
1 x	1/12 Pilot "Tom"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Pilot "Anthony" (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	1/12 Pilot "Cougar"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	Angle support XT60 conector
1 x	Recessed MPX connector support (6 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	T-shape holder metal LAMA
1 x	Landing gear retract neumatic (Jet Legend)
1 x	EasyFLY Addon
1 x	Trailing leg 131 mm
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Axle wheel with accesories
1 x	Quick hose connector 6-6 mm
1 x	Angled clevis with threaded rod M3
1 x	Tail wheel for 8-12 kg models
1 x	Tail gear set (60-120 class)
1 x	40 mm air cylinder
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Parachute expulsion foam
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Epoxy 40 min (Resin). 25Kg
1 x	Epoxy 5 min. 200g
1 x	PT 16x10 E Propeller
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	Profile ABS half cane 3x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Rubber profile 8-2 mm 2M
1 x	MultiLog Altimeter
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Glass fibre sleeve Ø 20 mm X 10m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Panel Honeycom carbon 350x150x3.5mm
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Glass fibre sleeve Ø 20 mm X 20m
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Fiberglass motor-holder for electric motors
1 x	Cooler motor type 300
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	Electric coversion set
1 x	Motor holder for AC 28/7
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Motor Mega AC 22/35 4S
1 x	Motor Mega AC 16/30/01
1 x	Racor 4/6 mm
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Epoxy 5 min. 500 g (Hardener)

5,188.65EUR