7.00EUR

Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
[R1501215]

Superglue for extreme loading conditions

Viscous, impact-resistant, high-tensile, heat-resistant, foaming resistant
ca. six times greater impact strength and ten times greater shear strength than conventional CA adhesives
Very high lap shear strength (240 kg/cm² = 24 MPa; for steel on steel)
Max thermal resistance +135 °C (at this high temperature the adhesive still exhibits a lap shear strength of 60 kg/cm² = 6 MPa; for steel on steel)
Excellent water resistance
Viscosity approx. 3000 mPa·s
This one-component ethyl cyanoacrylate adhesives sets quickly to yield a transparent bond ideal for balsa wood and materials exhibiting low porosity, e.g. metals, rubbers and plastics
Content: 20 g

Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Motor DLE 430 cc - Paramotors
1 x	Silent-blocks DLE 170M
1 x	Small Crow DLE-170M
1 x	Connectors DEANS 4 pins (1 pair)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	XH female balance (3S) connector (2 pcs)
1 x	XH female balance (2S) connector (2 pcs)
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors DEANS (T)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x
1 x	500 ml sealer (DOPE)
1 x	Universal Colour Paste white 50 g
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Spannlack 1000 ml
2 x	Extractor piñones 2.3/3.2 mm
1 x	Universal Colour Paste deep black 250 g
2 x	Round Rod 2,5x1000 mm
2 x	Round Rod 6,0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	SIMtransmitter 6 Mode 2
2 x	ABS Strip 1.0x2.0x1000 mm
3 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
3 x	Strip ABS 2.0x5.0x1000 mm
2 x	Round Rod 5,0x1000 mm
1 x	EasyFLY Addon
3 x	Strip ABS 2.0x8.0x1000 mm
2 x	Strip 1,5x1,5x330 mm
2 x	Strip 2,5x1,25x330 mm
1 x	50m servo "Premium" wire (white/red/blue)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Hot Glue Stick BLACK
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Oratex Silver 2m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x	ABS Strip 1.5x6.0x1000 mm
1 x	Round Rod 1,0x1000 mm
2 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Support ECU Xicoy X-45
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support XT60 conector (2 pcs)
2 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Round Rod 3,0x1000 mm
1 x	Strip 2,0x2,0x330 mm
2 x	Round Rod 4,0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Interface Jack Adapter IKARUS
3 x	Interface Realflight Simulator
1 x	OLED-Display for PowerBox Mercury SRS
1 x	2 piece mounting frame
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x	Slave-cable USB Easy Sim
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Xplorer4 anemometro
1 x	Xplorer3 anemometro
1 x	MicroMatch PowerBox
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Crystal TX 35.150 Ch 75
1 x	28 mm tailwheel unit
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Crystal Universal RX 35.030 Ch 63
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	5 mm Prop Adapter M8
1 x	Rudder 2_Tray 4.5~5 inch
1 x	30 cm BEC cable (male)
2 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
2 x	Fiberglass plate 620x540x2,0 mm
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
2 x	Fiberglass plate 620x540x3,2 mm
2 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Fiberglass 280 g/m² 5000x1000 mm
1 x	Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
2 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Carbon plate 700x550x0.5 mm
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
2 x	PVC plate 320 x 194 x 0.23 mm (brown)
2 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Gear set HITEC HS205/225MG/5245MG/7245MH
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Crystal TX 35.180 Ch 78
1 x	Crystal RX 35.030 Ch 63
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Crystal RX 35.050 Ch 65
1 x	Micro Crystal RX 35.090 Ch 69
1 x	Crystal TX 35.010 Ch 61
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Crystal Universal TX 35.140 Ch 74
1 x	Crystal Universal RX 35.140 Ch 74
1 x	6 mm Prop Adapter M8
1 x	Dumper propeller 6/8 mm
1 x	3,2 mm Prop Adapter M8
1 x	3 mm Prop Adapter M6
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Servo Mount S (red)
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Red aluminium servo arm V3-Futaba 1,25inch M3
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x	Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Fiberglass 25 g/m² 5000x1270 mm
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
2 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
2 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x	Chopped glass fibre strands 0.2 mm
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Foam plastic plates (310x210x2 mm)
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
2 x	Fiberglass plate 620x540x0,2 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Chopped glass fibre strands 3 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Styrene plate 320x120x0.5 mm
1 x	Foam plastic plates (310x210x3 mm)
1 x	Carbon plate 550x350x3.0 mm ECOTECH
2 x	Fiberglass plate 620x540x1,0 mm
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x	Foam plastic plates (310x210x8 mm)
1 x	Glass fabric 25 g (2 m²)
1 x	Foam plastic plates (310x210x5 mm)
2 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Carbon plate 550x350x4.0 mm ECOTECH
2 x	Film release agent PVA 25 ml
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 10m
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Carbon plate 550x350x1.5 mm ECOTECH
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Release film 100 cm x 50 m
2 x	Fiberglass plate 620x540x0,3 mm
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Servo HITEC HS-45 HB, servo box
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	MIG 29 3D RTF, Servo
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Servo HITEC HS-125 MG
1 x	Servo arms set HS-60/81/85/5082MG/5085mg
1 x	PS-050 TONEGAWA Servo
1 x	SERVO DES 588 BB MG
1 x	Servo HITEC D951 TW
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Digital scale up to 40 kg

14,634.60EUR