4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock
Propeller MENZ-S 23x8 temporarily out of stock	CA Glue (medium) 20g temporarily out of stock	Conector BEC male (10 pcs) temporarily out of stock

Quick Find

Shopping Cart

2 x	18 mm reinforced hinge
2 x	Gates hinge
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Large flex hinge (12 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
3 x	Miniature brass strap hinge, 1 m
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Small pinned hinge (12 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Long pinned hinge (12 uds)
3 x	Flap hinge (6 pcs)
1 x	15 mm reinforced hinge
1 x	Micro flex hinge (12 uds)
1 x	Parachute PV6 for F3J
1 x	Set cintas unión paracaídas 145 cm
1 x	Wing OXY 0,5 pulgadas2
1 x	Wing OXY 5,0 m2
2 x	Para-RC Mix
1 x	Parachute BACKUP X100
1 x	Trike XL motor set (motor+esc+prop)
1 x	Ballast 700gr OPALE
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Windsock Ozone L - 700 mm
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
3 x	Resistor 3W 5% OR82
3 x	Landing lights 18 mm (0.71in)
1 x	Combo lighting module with covering drop shape
2 x
1 x	Extinguisher CO2 - 2 Kg
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Premium servo extension 75cm
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Socket head long ball link M3 (2 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Support Pitot JETI
1 x	Support Filtro FESTO
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
3 x	Angle support XT60 conector
1 x	Support Flush MPX Conector (6 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Windsock Ozone L -1200 mm
1 x	Long pinned hinge (6 uds)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	25 mm reinforced hinge
1 x	Lock nut M4 (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
2 x	Lock nut M2 (10 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Lock nut M2 (20 pcs)
2 x	Cover cap drop-shaped paintable 43 mm
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	NF-3 RC set
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	Heat sink for Optotronix LEDs
1 x	NF-3m Heli Kit
1 x	USB Interface Adapter
1 x	Support pump Xicoy X45
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Albatros ,spare cockpit (Top Model)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Albatros ,spare fuselage (Top Model)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Support ECU Xicoy X-45
1 x	Support conector MPX (6 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	ARTIST 1.560 mm
1 x	13 mm wing servo holder
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	BULLIT Wing 1095 mm
1 x	Canopy Astra
1 x	Bidule 111 3000 mm Canopy
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Albatros red/white (Top Model)
1 x	STANDOFF GAS ENGINE MOUNT 38 mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Jet Afterburner Simulator NF-Jet3 YSW
1 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	NF-3XL set
1 x	Jet Afterburner Simulator NF-Jet4 RY
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	Charger 220/110v
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	20x13 Falcon electric carbon prop (64g)
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	CA Glue (medium) 20g
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m

6,222.15EUR