96.00EUR

Epoxy 40 min (Resin). 5 Kg
[R1001351]

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

Suitable hardeners for Epoxy Resin L:

Hardener S
Potlife: 20 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 139-0 to 100 140-5

Hardener L
Potlife: 40 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 144-0 to 100 145-5

Hardener EPH 161
Potlife: 90 minutes
Mixing ratio: 100 : 25 parts by weight resin to hardener, 100 : 49 parts by volume resin to hardener
Order no. 112 123-5 to 112 125-4

Hardener EPH 500
Potlife: 60 minutes
Mixing ratio: 100 : 63 parts by weight resin to hardener, 100 : 71 parts by volume resin to hardener
Order no. 100 147-2 to 100 147-8

Hardener W 300
Potlife: 300 minutes
Mixing ratio: 100 : 35 parts by weight resin to hardener, 100 : 42 parts by volume resin to hardener
Order no. 100 149-4 to 100 149-7

Hardener GL 1
Potlife: 30 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 095-3 to 104 095-7

Hardener GL 2
Potlife: 210 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 100-3 to 104 100-7

Hardener CL
Potlife: 60 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 109 285-H-3 to 109 285-H-6

Please order hardener separately

under request

Reviews

Quick Find

Shopping Cart

1 x	Strip ABS 2.0x10.0x1000 mm
2 x	Round Rod 1,25x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS I Strip 10x5x1000 mm
2 x	Round Rod 2,0x1000 mm
2 x	Strip 3,5x1,75x330 mm
1 x	Strip ABS 2.0x3.0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
3 x	Round Rod 3,0x1000 mm
1 x	Strip 2,5x1,25x330 mm
2 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	SE Ring 360 mm (2 pcs)
2 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Tape GFK 38 mm
2 x	SE Ring 330 mm (4 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	20x200 mm battery rings
1 x	SE Ring 480 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Tape GFK 25 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Cinta Goldfix 1m
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	SE Ring 450 mm (2 pcs)
2 x
2 x	Marker ties (20 pcs)
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	SE Ring 350 mm (2 pcs)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Futaba Female 40 cm extension
1 x	Futaba male 40 cm extension
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension 100 cm (Futaba)
2 x	Extension silicon 30 cm female (Graupner)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Premium servo extension 50cm
2 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension silicon 100 cm (Graupner)
1 x	Circlick securite
1 x	Premium servo extension 100cm
2 x	Extension 15 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	WingFix ULTRA Black Edition
1 x	Extension 30 cm (Futaba)
1 x	Extension lead 15 cm Multiplex
1 x	Extension silicon 10 cm (Graupner)
1 x	Oracover Yellow CADMIO 2 m
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	800TVL CMOS camera for FPV
1 x	Hardener Aero EPH 161 (500 g)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Pilot JAN 1/4 Saiplanes
1 x	1/6 Pilot "Garry"
1 x	Micro flex hinge (12 uds)
1 x	ABS I Strip 20x10x1000 mm
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Support pump Xicoy X45
1 x	Support FUEL DOT V3
1 x	Field folding model stand
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	PROXXON - SAW BLADE (50MM - 20T) (28017)
2 x	Fresa corte diamante Ø 2.35mm (lentil)
2 x	22 mm Cut Disc Proxxon/Dremmel
2 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
2 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	Kwik link unmount tool
1 x	55% silver electrodes (2 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Mini Lock Grips 2PCS
2 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Heli blades angle measurer
1 x	Sealing Iron Sleeve STD
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Rubber Insert soft, 1 Pcs.
1 x	PROXXON - SAW BLADE 8MM 0ZI220E
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Horn mando long (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Micro control horn T2 Ø 1
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Rudder forward 80x28 "type Kato"
1 x	6 mm M3 variable inclined horn
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x	Precision wrench L100 mm
2 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
2 x	Cotton Flocks, bag/ 500 g
1 x	Latex Gloves GRIP, size L, box/ 100 pcs
2 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Cockpit plastic closing
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
2 x	Ring 320 mm length (5 pcs)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Propeller balancer
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Motor DLE 200cc Std
1 x	Cockpit aluminium closing 4.7g
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Screwdriver for Torx® TX8
1 x	SlowFlyer control horn (3 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x	Glass fibre sleeve Ø 20 mm
1 x	Carbon plate 550x350x1.5 mm ECOTECH
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Universal Colour Paste deep black 50 g
1 x	Yellow smoke canister 140 g
1 x	Crystal Universal RX 35.150 Ch 75
1 x	Crystal Universal RX 35.090 Ch 69
1 x	Crystal Universal RX 35.030 Ch 63
1 x	Crystal Universal RX 35.170 Ch 77
1 x	Grasa 2 ml
1 x	KIRA 600-30 6,7:1
1 x	PYRO 600-11
1 x	KIRA FAI 5F5/4s
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 50 cm (Futaba)
1 x	Extension silicon 35 cm (Futaba)
1 x	1,5x50 mm allen screwdriver
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Horn 6/27 with M3 Bearing
1 x	Horn 5/15 with M2 Bearing
1 x	Extra long horn 60x30
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn 20x28,5 mm (2 pcs)
1 x	5 mm M2 variable inclined horn
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Horn 6/20 with M3 Bearing
1 x	Small aluminium horn red (2pcs)
1 x	Long adjustable control horn with bearing
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Chopped glass fibre strands 3 mm
1 x	CA Glue (medium) 20g
1 x	Release film 100 cm x 50 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Digital scale up to 40 kg
1 x	Cotton Flocks, bag/ 7 Kg
1 x
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m

12,572.40EUR