10.50EUR

Chopped glass fibre strands 3 mm
[R2101002]

Chopped glass fibre strands 3 mm (1 Kg)

Fast, good wetting
Ideal for polyester resins due to the coating, well suited for epoxy resins

Technical data:
Fibre type: E-Glass
Shape in section: Round
Fibre coarseness: 9–14 µm
Length: 3 mm ± 5 mm
Specific gravity: 2.53–2.55 g/cm³
Resistance to dry heat: ca. 315 °C
Softening temperature: approx. 840 °C
Moisture content on delivery: max. 0.3 %
Colour: White
Surface treatment: Silane based 0.5–1.5 %

Resistance to light, to weather, to ageing = good
Acid resistance = good
Alkali resistance = limited
Solvent resistance = good
Swelling value in water = 0 %

Applications:
Fibre pastes and moulding compounds, synthetic plasters, putties, adheslves, corrosion protection coats, asbestos substitutes. In the case of coupling layers to fill and back up edges and embed alignment dowels and screw unions in mould construction, a mixture of 50 % vol. chopped glass fibre and 50 % vol. cotton flock is mostly used. The volume details are intended to assist in judging the amount supplied. These details refer to the loose bulk amount. The contents may become compressed during transport or storage

under request

Reviews

Quick Find

Shopping Cart

1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita 27x14x7 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
3 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
2 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
3 x	DUPLEX 2,4GHz MRPM-AC EX
1 x	DUPLEX 2.4EX Expander E4
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Suport PITOT
1 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Sensor DUPLEX 2.4EX MUI 200
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x	DUPLEX 2.4EX MT 125 temperature sensor
1 x	DUPLEX 2.4EX RC Switch
3 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	Long pinned hinge (6 uds)
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	Indoor hinge with servo arm integraded
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Gates hinge
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Glases Ace
2 x	Glases Aspen
3 x	Glases Moritz
1 x	Vasa model Catapult
1 x	Bungee HLG Premium
1 x	1/12 Pilot "Tom"
1 x	Release wax 250ml
1 x	Horn DUBRO 1/2A
1 x	CC 05
1 x	CC 01
1 x	SE Ring 240 mm (2 pcs)
1 x	6 mm ball link M3 (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
2 x	Ferrita 14x8x5.5 mm
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	DUPLEX 2.4GHz GPS
1 x	CA Glue (medium) 20g
2 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
2 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	DUPLEX MRMP Hall EX
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Micro flex hinge (12 uds)
1 x	DUPLEX MUI 30 Sensor
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
2 x	Glases Stratus
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	Chopped glass fibre strands 0.2 mm
1 x	15x7 tree blades propeller LEFT
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Cotton Flocks, bag/ 500 g
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	14 mm portholes (10 pcs)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	25 mm fenders (10 pcs)
1 x	Pitot tube JETI MSpeed DUPLEX
1 x	Carbon fiber rod 8.0 mmx1000 mm

3,886.09EUR