4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock
Propeller MENZ-S 23x8 temporarily out of stock	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) temporarily out of stock	Conector BEC female (10 pcs) temporarily out of stock

Quick Find

Shopping Cart

2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
2 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
3 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 14 mmx1000 mm
3 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Red smoke canister 65 g
1 x	SE Ring 400 mm (2 pcs)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	USB Mini Camera endoscope
1 x	Vacuum pump 12 CFM
1 x	Spring Clip Ø25 mm
1 x	Junta humo metalica G85 (DLE85/DLE170)
2 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	Junta humo metalica G35 DLE35
1 x	Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x	Sparkplug 1/4-32 Glow
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Carbon fiber flat 1000x6.0x0.8 mm
4 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	VIPER JET G2 Esq. 2 Red/White/Silver
1 x	VIPER 1.7 Electric break wheels + structure
1 x	Telemetry interface ALTIS to Futaba
1 x	Telemetry interface ALTIS 6 cm
1 x	Red aluminium servo arm V3-Futaba 1,25inch M3
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x	Rudder 2_Tray 4.5~5 inch
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Extension Arm for Carburetor (red)
1 x	Suction funnel for carburetor 90D-L (red)
1 x	Spark motor OS Type F
1 x	Spark motor OS nº 8
1 x	Reed valve for DA 50-R
1 x	Hose clips 6 mm
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	SAITO FG-36 carburetor
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
1 x	DLE 55 carburetor
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Spark motor OS nº 3
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x

6,318.81EUR