Epoxy Resin HT 2 + Hardener HT 2 (45 minutes), set of two components

Solvent- and filler-free, highly transparent laminating and coating system of very low viscosity with absolutely tack-free, glossy surface.
Highly transparent, almost water-clear
High degree of UV stability
Tack-free curing even of thin layers
Also for casting in layer thicknesses up to 5 mm in one operation
Free of nonylphenol
Epoxy Resin HT 2 is suitable for impregnating glass, aramid, and carbon fibres* and for bonding wood, metal, foamed polystyrene, etc..

*Owing to its low surface tension the system exhibits good filler absorption properties. And it has excellent wetting properties with respect to reinforcing fibres of glass, aramid, and carbon.
Epoxy Resin HT 2 is a laminating resin of very low viscosity based on bisphenol A/F. The bisphenol F component reduces the viscosity and prevents the resin from forming crystals at low storage temperatures (less than + 5 °C).
Epoxy Resin HT 2 is diluted with a difunctional reactive compound and is free of solvents and fillers.
The system is highly transparent and yields in conjunction with finished glass fabrics (Finish FK 144/FK 800) highly transparent laminates with good light fastness.

Processing time: 45 minutes
Mixing ratio:
100 : 48 parts by weight of resin to hardener
100 : 55 parts by volume of resin to hardener

Curing time: 24 hours
Cold curing