Top » Catalog » R-G.de » R1501032

4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Extension MPX-MPX 20 cm
Extension MPX-MPX 20 cm

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

XT-60  connector (male)
XT-60 connector (male)

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Motor DLE 200cc Premium Muffler
1 x Small Crow DLE-170M
1 x Motor DLE 170 M- Paramotors
2 x Motor DLE 430 cc - Paramotors
3 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Pilot "Anthony" (Slimline)
1 x Cotton Flocks, bag/ 7 Kg
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x 3 LiPo XH>EH adapter
1 x CM-3
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Round Rod 1,25x1000 mm
2 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Round Rod 5,0x1000 mm
1 x Miniature brass strap hinge, 1 m
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x 3,0x60 mm allen screwdriver
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Squared carbon wing joinner 5x5x220 mm
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x EC-Cutter
1 x 15 mm reinforced hinge
1 x Horn 6/27 with M3 Bearing
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Truck-trailer for gliders 720 x 285 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Motor DLE 200cc Std
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Locking cable tie 4.6x203 (uds)
1 x Extractor piñones 2.3/3.2 mm
1 x Ball Link Plier
1 x Epoxy Resin L (2.5 Kg)
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x 2 LiPo XH>EH adapter
1 x Conector JR Servo male (50 pcs)
1 x ABS Strip 1.0x3.0x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Jeti Black cap
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Support pump Xicoy X45
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Banna gold connector 2,5 mm (M/F)
1 x Dremel PERMAGRIT thin lime
1 x Gates hinge 30x16 mm (2 pcs)
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Extension 100 cm (Futaba)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x "M" set
1 x Slave-cable USB Easy Sim
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Green smoke canister 100 g
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Steering arm 16 mm Ø 4 mm
1 x Covered closure or fairings
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Silent-blocks DLE 170M
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x One touch canopy lock
1 x Canopy Latch
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Cabel "Y" 30 cm (Futaba)
1 x Strip 2,5x1,25x330 mm
1 x 4,8x1000 mm 2:1 black termoretract tube
2 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x ABS Strip 1.0x2.0x1000 mm
1 x Support conector MPX (6 pcs)
1 x Conector BEC male (10 pcs)
1 x CC 01
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x Conector JR Servo male (10 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Conector Servo female 4 pines
1 x 4 LiPo XH>EH adapter
1 x 30 cm DEANS female connector
1 x Medium pin type hinge (12 uds)
1 x CA Glue (medium) 20g
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Buy Perforated film 100 cm / 20 m
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Battery charging cable XT60
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Tow hook for tug
1 x Spikes Band (5 m)
1 x Extension silicon 35 cm (Futaba)
1 x CC 03
1 x Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Oracover Azul Cielo 2 m
1 x Strip ABS 2.0x8.0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
2 x Carbon fiber rod 3.0 mm x 1000 mm
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x 68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Ball Link Plier
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Connector CAN 15
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x 1/10 Pilot "Jack"
1 x Extension silicon 50 cm (Futaba)
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x Pin hinge 34x16 mm (10 uds)
1 x Extension silicon 75 cm (Futaba)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x BEC 3A FOXY
1 x Extension 30 cm (Futaba)
1 x Conector FUTABA Servo female (10 pcs)
1 x Vasa model Catapult
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Oracover CHROME 2m
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x Dean "T" - Futaba Adapter
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Round Rod 2,0x1000 mm
1 x Piloto jet 130 mm
25,112.69EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies