54.00EUR

Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
[R1101491]

Epoxy Resin L 285 + Hardener 386, kit/ 1,35 kg

Epoxy Resin L 385 + Hardener 386
Epoxy Resin L 385 is a resin system for laminates which is authorised by the Federal Office for Aviation. This resin has variable pot lives and is suitable for processing glass, carbon and aramid fibres.

Extraordinary good physiological compatibility
Pot life 120 minutes
Good mechanical and thermal properties by exploiting the good mechanical properties, this system is suitable for manufacturing components subject to high static and dynamic loads; in particular in the construction of gliders, power gliders and aeroplanes as well as in the boat and ship building industry, the manufacture of sports equipment and model aircraft.

Following curing at room temperature, the resulting manufactured components can be removed from the mould and processed. Even under unfavourable curing conditions like low temperatures (> 20 °C) or high humidity, one obtains tack-free, high-gloss surfaces. The viscosity of the mix is adjusted such that a rapid and optimal wetting of the reinforcing fibres are guaranteed and yet bleeding of the resin from weaves on vertical faces is inhibited.

Mixing ratio:
100 : 35 parts by weight of Epoxy Resin L 385 : Hardener 386
100 : 43 parts by volume of Epoxy Resin L 385 : Hardener 386

Curing time: 24 hours at 20 °C + heat curing 10–15 h at 50–80 °C (at least 40 °C is necessary to get out of the brittle phase)

Hardener 386 should be heat cured in every case.

Advice for storage:
Despite the reduced tendency of our resin systems to crystallise, we recommend storing the containers in a location with low humidity at 15–30 °C. Following removal of materials, the containers have to be carefully sealed in order to avoid the absorption of water, mainly by the hardeners. The aminic hardeners in particular tend to chemically react if exposed to the air, also known as carbamate formation or blushing this can, under certain circumstances, render the material unusable. One recognises this chemical reaction from a white precipitate in the material.

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Conector MR-60 (pareja)
1 x	Arrancador EM Gear Power 80
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Crimpadora
1 x	Turbina KINGTECH K320 G5
1 x	Tren aterrizaje Electrico "Black Edition" ULTIMATUM 3.0 (Electro
1 x	Extension MPX-MPX 20 cm
1 x	Kit de montaje "S" para barco
2 x	Iniciadores para AX-60 (5 pcs)
1 x	Set de Humo "M"
1 x	Set de Humo "Planeador"
1 x	Iniciadores eléctricos cohetes (6 pcs)
2 x	Iniciador FRX2 Wireless Receptor
1 x	Paracaidista
1 x	Soporte ventral para AX-18/AX-60
2 x	Espuma expulsión paracaídas
2 x	Kit de montaje "S" para avión
1 x	Cartuchos de humo AX-60 blanco (5 pcs)
1 x	PCARD sistema wireless
1 x	Cartuchos de humo AX-60 amarillo (5 pcs)
1 x	Cartuchos de humo AX-9 blanco (10 pcs)
2 x	Set de Humo "S"
2 x	Cartucho de humo Amarillo 140 g
1 x	Iniciador FTX2 Wireless Transmisor
2 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	Cartuchos de humo AX-18 blanco (5 pcs)
1 x	Cartuchos de humo AX-60 rojo (5 pcs)
2 x	Aceite para hacer humo 3l Smoke
1 x	Cartucho de humo Amarillo 100 g
1 x	Cartuchos de humo AX-3 blanco (10 pcs)
1 x	Cartucho de humo Verde 100 g
3 x	Mochila OPALE paramodels
1 x	Paramotor BackPack XXS (sin accesorios)
1 x	Vela OXY 5.0 m2
1 x	Paracaidas BACKUP X100
1 x	Paracaídas de seguridad 1,8 m2
1 x	Vela OXY 0,5 pulgadas2
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Horn de mando 6/27 con rótula M3
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Horn de mando 6/20 con rótula M3
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn corto de latón M4 para cable (10 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn de mando 6/35 con rótula M3
1 x	Horn con ball 40x30
1 x	Conjunto de mandos arriostrados
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
2 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Horn de mando 5/20 con rótula M2
1 x	Horn control flaps (1 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Alicate para hacer "Z"
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Ball link aluminio M3 V1 azul (10 pcs)
2 x	Cartucho de humo Verde 140 g
1 x	Bateria RX JETI LiIon RB 6200 7.2v
1 x	DUPLEX 2,4 EX MU 3 Sensor
1 x	DUPLEX 2.4EX Central Box 320
1 x	Condensador AddCAP 10AS
1 x	DUPLEX 2,4EX Expander E2
1 x	LO 100 ARC 3.3m,cabina
1 x	Velero Ka 7 Red (2540mm)
1 x	ASK 21 6.5m + pylona
2 x	LUNAK 4.00 m
1 x	DG-303 ACRO 3750 mm (Airworld)
1 x	LO 100 ARC 3.3m,marco cabina
1 x	TAKEO 3.6m electric
2 x	LIBELLE Standard 3.8m D-box H-201
1 x	ASH 31 6.08m Composite
1 x	Surprise XII Estabilizador Horizontal (Freudenthaler)
2 x	Planeador KNIRPS
1 x	Fournier RF-4D
1 x	Bungee HLG Premium
1 x	Cartucho de humo Rojo 100 g
1 x	Rueda KOVO SLH 120x60 mm
1 x	Paracaidas rescate "RC-Evo-Cross"
2 x	Paracaídas PV6 para F3J
2 x	Para-RC Mix
1 x	Piloto MAX ARTF
1 x	Cartucho de humo Verde 65 g
1 x	Paramotor BackPack XXS 2
2 x	Gorra Jeti Negra
1 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Horn corto de latón M3 para cable (2 pcs)
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Horn de mando pequeño ajustable aluminio con rodamiento 2,8x15
1 x	Horn de mando largo ajustable con rodamiento
1 x	Reenvío de Profundidad 70x28 mm "tipo Kato"
1 x	Horn de mando medio extrafuerte con rodamiento 2,8x24
1 x	Cianocrilato MD GA460 odourless 20g
1 x	Cianocrilato CA Glue (medium) 20g
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	Fox 4000 mm Airworld,marco cabina
1 x	BLANIK 50 V2 Silver/Blue (SebArt)
1 x	Fox 4000 mm (Airwold)
1 x	BLANIK 50 V2 Silver/Orange (SebArt)
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Bascula precisión 0.1- 600 g
2 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x	Bolsa vacio 1200 mm x 50 m
1 x	Cianocrilato CA Gast 20g
1 x	Canulas repuesto Mixing tube 50+25g (10 pcs)
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Acelerador Aero EPH 161 (250 g)
2 x	Agente espumante para resinas epoxycas 200g
1 x	Cinta Roving carbono 20m
2 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Profundidad VENTUS 2cx 4.5m
1 x	VAGABOND 1500 mm ARF V2 (Rojo)
2 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	LO 100 Scale 1:2 - Modellbau Bruckmann
1 x	Bayoneta aluminio ø35×1.5 mm x 1m
1 x	Cartuchos de humo AX-60 mezclados (5 pcs)
1 x	GP 15 JETA
1 x	SZD-56 Diana-2 Carbon D-box wing
1 x	Funda Alas JEEMO
1 x	Tapón plástico para AIR BURTS (30 pcs)
1 x	Servo KST MS825 V8.0 35kg 8.4v
1 x	Rueda ligera 50x18,5x3 mm (2 uds)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Rueda radios 220mm (2 pcs)
1 x	Cartucho de humo Amarillo 65 g
1 x	X-RAY Micro QR (Profundidad)
1 x	Aero-Master (Aero-naut)
1 x	Para-RC Trike "RC-Bullix"
1 x	Grifo FESTO 4-4 mm
1 x	Anclaje carenado ruedas Ø 5 mm (2 uds)
2 x	Tubo carbono 3K-PW (Ø25 mm, Ø22.5 mm L:2000 mm)
2 x	Tubo carbono 3K-PW (Ø25 mm, Ø21 mm L:1000 mm)
1 x	Tubo carbono 3K-PW (Ø20 mm, Ø18 mm L:1000 mm)
1 x	Bascular < 40 Kg
1 x	Epoxy 40 min. (3,5 Kg) 2,5 kg Resina / 1 kg Hardener
2 x	Cilindro de aire 40 mm
1 x	Manómetro de 4 mm
1 x	Actuador electrico 25 mm
1 x	Eje ruedas Ø 4 mm (2 uds)
1 x	Conector FESTO 4-4mm antirretorno
1 x	Prisionero 2 mm Ø (4 uds)
1 x	Pletinas nylon pequeñas anclaje tren aterrizaje (4 uds)
1 x	Polvo de algodon 7 Kg
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Fibra de vidrio 163 g/m² 1 m x 5 m (Twill)
1 x	Tubo carbono (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x	Actuador electrico 25 mm HIGH TORQUE
1 x	Fail Safe air retract
1 x	Clevis con trasmisión M3
1 x	Conector FESTO "T" 3mm
1 x	Llave FESTO
1 x	Brazo de servo agujero 5 mm para FEMA 9810A
1 x	Brazo de servo agujero 4 mm para FEMA 9810A
1 x	Conector FESTO "Y" 4mm
1 x	Conector FESTO "T" 6-6-6 mm
1 x	Conector FESTO "T" 3-3-3mm
1 x	Pletinas nylon grandes anclaje tren aterrizaje (4 uds)
1 x	Conector FESTO 4-4mm
1 x	Eje ruedas Ø 5 mm (2 uds)
1 x	Anclaje carenado ruedas Ø 3 mm (2 uds)
1 x	Conector FESTO "T" 4-4-4 mm
1 x	Tubo carbono 3K-PW (Ø14 mm, Ø12 mm L:2000 mm)
1 x	Cianocrilato MD GLUE+ 405 20g (viscosidad media)
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Tubo carbono 3K-PW (Ø20 mm, Ø18 mm L:2000 mm)
2 x	Tubo carbono 3K-PW (Ø14 mm, Ø12 mm L:1000 mm)
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Tubo carbono 3K-PW (Ø18 mm, Ø16 mm L:1000 mm)
1 x	Film perforado 145 cm / 50 m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Tubo carbono 3K-PW (Ø40 mm, Ø37 mm L:2000 mm)
1 x	Epoxy 5 min. 500 g (Acelerador)
1 x	Tubo carbono 3K-PW (Ø40 mm, Ø36 mm L:1000 mm)
1 x	Fibra carbono tela 160g/m2 100 cm x 10 m
1 x	Epoxy Resin L + Hardener LT kit/ 3125g
1 x	Plancha fibra vidrio 620x540x1,0 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	Fibra carbono tela No-cruzada ST 200g/m2 50 cm x 20 m
1 x	Epoxy Resin L + Hardener LT kit/ 895g
1 x	Plancha carbono 1000x500x2,0 mm ECOTECH
1 x	Tubo carbono 3K-Matt (Ø25 mm, Ø23 mm L:1000 mm)
1 x	Fibra carbono tela 240g/m2 100 cm x 20 m
1 x	Tubo carbono 3K-PW (Ø12 mm, Ø10 mm L:1000 mm)
1 x	Tren retráctil veleros 12-25 Kg 2-2.8 (sin rueda) 165 mm
1 x	Fibra carbono tela 240g/m2 100 cm x 2 m

45,394.96EUR