125.00EUR

Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
[R1101492]

Epoxy Resin L 285 + Hardener 386, kit/ 3,375 kg

Epoxy Resin L 385 + Hardener 386
Epoxy Resin L 385 is a resin system for laminates which is authorised by the Federal Office for Aviation. This resin has variable pot lives and is suitable for processing glass, carbon and aramid fibres.

Extraordinary good physiological compatibility
Pot life 120 minutes
Good mechanical and thermal properties by exploiting the good mechanical properties, this system is suitable for manufacturing components subject to high static and dynamic loads; in particular in the construction of gliders, power gliders and aeroplanes as well as in the boat and ship building industry, the manufacture of sports equipment and model aircraft.

Following curing at room temperature, the resulting manufactured components can be removed from the mould and processed. Even under unfavourable curing conditions like low temperatures (> 20 °C) or high humidity, one obtains tack-free, high-gloss surfaces. The viscosity of the mix is adjusted such that a rapid and optimal wetting of the reinforcing fibres are guaranteed and yet bleeding of the resin from weaves on vertical faces is inhibited.

Mixing ratio:
100 : 35 parts by weight of Epoxy Resin L 385 : Hardener 386
100 : 43 parts by volume of Epoxy Resin L 385 : Hardener 386

Curing time: 24 hours at 20 °C + heat curing 10–15 h at 50–80 °C (at least 40 °C is necessary to get out of the brittle phase)

Hardener 386 should be heat cured in every case.

Advice for storage:
Despite the reduced tendency of our resin systems to crystallise, we recommend storing the containers in a location with low humidity at 15–30 °C. Following removal of materials, the containers have to be carefully sealed in order to avoid the absorption of water, mainly by the hardeners. The aminic hardeners in particular tend to chemically react if exposed to the air, also known as carbamate formation or blushing this can, under certain circumstances, render the material unusable. One recognises this chemical reaction from a white precipitate in the material.

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Arandela abierta 3.1 mm (20 pcs)
1 x	Arandela de bloqueo 3 mm (10 pcs)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
2 x	Arandela dentada 2.7 mm (20 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
2 x	Arandela de bloqueo 1 mm (10 pcs)
2 x	Arandela abierta 2.6 mm (20 pcs)
1 x	Arandela de bloqueo 4 mm (10 pcs)
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Arandela conica alumino M4 azul (8 pcs)
1 x	Arandela 1.7 mm (20 pcs)
1 x	Circlick para eje 2.3 mm (10 pcs)
1 x	Arandela 2.2 mm (20 pcs)
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
2 x	Arandela de bloqueo 1.5 mm (10 pcs)
1 x	Spray adhesivo "INFUTAC" 500 ml
2 x	Disolvente Plasti Dip 1000 ml
2 x	Spray YELLOW Inca Lexan 150ml
1 x	Relleno balsa KAVAN 200ml - color balsa
1 x	Relleno balsa HobbyLite
2 x	Pasta universal color Jet Black 50 g
1 x	Plasti Dip Liquid Tape 429 ml negro
1 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Pasta para estaño 20 g
1 x	Pintura GHT Lexan negro 150 ml
1 x	Tapaporos 500 ml (DOPE)
2 x	Pasta universal color Blanco (RAL 9003) 1 Kg
1 x	Disolvente barniz tensor 500 ml
1 x	Plasti Dip Liquid Tape 429 ml naranja
1 x	Silicona adhesiva ELASTOSIL E4 tube 90ml
1 x	Barniz Tensor 1000 ml
1 x	Tapaporos 1000 ml (DOPE)
1 x	Spray grafito 33
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Alicate para "Ball-Link"
1 x	Abrazadera con letrero (20 pcs)
1 x	Varilla acero Ø 5,0 mm x 1000 mm
2 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
2 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	Pines alineamiento Ø 8 mm-2 pats (100 pares)
1 x	Cianocrilato CA Gast 20g
1 x	Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Fibra carbono tela 68 g/m² (Aero, plain weave) 100 cm x 0.5m
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
2 x	Tornillo M2x16 PH
2 x	Tornillo M2.9x9.5 (10 pcs) Especial cabinas, tapas servos
1 x	Tornillo M2x8 (10 pcs)
1 x	Tuerca para insertar M6 (10 pcs)
1 x	Tornillo M1,6x8 (10 pcs)
1 x	Set piñones servo HITEC HS-7950TH
1 x	Servo HITEC HS-5065 MG digital
1 x	Tornillo M2.2x9.5 (10 pcs) Especial cabinas, tapas servos
1 x	Set de tornillos para brazos de servos Hitec MG
1 x	Set piñones servo HITEC HS-6965 carbonite
1 x	Servo SAVOX SW-1250 MG digi
1 x	Tuerca para insertar hexagonal M4 Br (4 pcs)
1 x	Tornillo allen M4x12 (10 pcs)
1 x	Servo FUTABA BLS173 SV
1 x	Tuerca para montaje M3 (10 pcs)
1 x	Set piñones servo HITEC HS205/225MG/5245MG/7245MH
1 x	Tuerca para montaje M2,5 (4 pcs)
1 x	Tornillo allen M2x8
1 x	Arandela abierta 4.1 mm (20 pcs)
1 x	Tornillo Servos M2x5/16 (4 pcs)
1 x	Tornillo nylon M4x20
1 x	Servo FUTABA SBL 471 SV
1 x	Tornillo allen M3x30 (10 pcs)
1 x	Brazo servo doble pull-pull 24/30 mm Futaba con rótulas
1 x	Brazo servo 25 mm Futaba con rótula M3
1 x	Servo SAVOX SB-2270 SG Highvoltage brushless
1 x	Brazo servo 54 mm Futaba con rótula
1 x	Tornillo M3x0,5x6 mm Cabeza Plana Titanio (4 pcs)
1 x	Soporte montaje servos Std. apaisado
1 x	Tuerca para montaje M3 (4 pcs)
1 x	Tornillo allen M4x30 (10 pcs)
1 x	Servo FUTABA BLS172 SV
1 x	Servo SAVOX SV-0236 MG HV
1 x	Base de soporte montaje servos Std. apaisado
1 x	Brazo servo 17 mm con rótula FUTABA
1 x	Tornillo allen M2x12
1 x	Brazo servo 38 mm Hitec con rótula
1 x	Servo SAVOX SV-1261 MG
1 x	Piñones servo FUTABA 3010
1 x	Brazo servo Futaba tandem 54 mm con rótula
1 x	Set piñones servo HITEC HS-225
1 x	Tornillo allen M2.5x8 (10 pcs)
1 x	Tuerca para montaje M2 (4 pcs)
1 x	Brazo servo doble aluminio V3-Hitec 3-3,5" azul
1 x	Servo SAVOX SC-1267 SG
1 x	Tornillo allen M3x5 (10 pcs)
1 x	Tornillo M2.5x10 (10 pcs)
1 x	Brazo servo 52 mm Hitec
1 x	Brazo servo 46 mm Futaba con rótula
1 x	Servo HITEC D951 TW
1 x	Servo SAVOX SA-1283 SG
1 x	Servo FUTABA S 3071 HV S-Bus
1 x	Set piñones servo HITEC HS-125MG/5125MG
1 x	Arandela abierta 2.1 mm (20 pcs)
1 x	Servo HITEC D-955 TW Titanium
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Brazo servo 30 mm Futaba con rótula M3
1 x	Servo HITEC D131 MW nano
1 x	Set piñones servo HITEC HS-311/322/325BB
1 x	Tornillo allen M2.5x20 (10 pcs)
1 x	Servo HITEC D950 TW
1 x	Servo FUTABA S 3072 HV S-Bus
1 x	Servo HITEC HS-225 BB
1 x	Servo SAVOX SV-1270 TG
1 x	Servo FUTABA HPS-A700 Digital S-Bus
1 x	Set piñones servo HITEC HS-55
1 x	Abrazadera para tubo de teflón Ø29 mm ext (1 pcs)
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x	Codo escape para SAITO FA65/72/80/82a/91S/100/
1 x	Escape Pitts OS MAX.35.40 FP
1 x	Escape Pitts en kit para CAP 21
1 x	Soporte Guia Antena doble
1 x	F-16 Falcon Black Knights 1:6 (1630 mm)
1 x	Cristal Universal RX 35.120 Ch 72
1 x	Clips scape Ø25 mm
1 x	Acelerador Aero EPH 161 (500 g)
1 x	Gafas Stratus
1 x	EDGE 540-A 91" (2310 mm)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	Gafas Flitemaster
1 x	Carbon CUB FX-3 100-200 ARF, 4200 mm
1 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	Gafas Moritz
1 x	BOOMERANG II 40/46 ARF 1.55mm
1 x	SCANNER 46-55 Sport Scale 1:7 ARF
1 x	Sebart 2.2 m BLANCO/AZUL (SebART)
1 x	Bidule 111 3000 mm
1 x	Bidule 170 ARF 3.48 m
1 x	Bidule 55 2460 mm, Cabina
1 x	Epoxy 40 min (Resina). 5 Kg
1 x	Epoxy 5 min. 500 g (Resina)
1 x	Epoxy 40 min (Acelerador). 1 Kg
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Tubo carbono 3K-PW (Ø40 mm, Ø36 mm L:1000 mm)
1 x	Arandela 4.3 mm (20 pcs)
1 x	Tubo carbono 3K-PW (Ø40 mm, Ø36 mm L:2000 mm)
1 x	Tubo carbono 3K (Ø 8 mm, Ø 7 mm L:1000 mm)
1 x	Espatulas madera (150x18x1.5mm) 100 pcs
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	Tubo carbono 3K-PW (Ø14 mm, Ø12 mm L:2000 mm)
1 x	Tubo carbono 3K-PW (Ø20 mm, Ø18 mm L:1000 mm)
1 x	Tubo carbono 3K-PW (Ø40 mm, Ø37 mm L:2000 mm)

19,459.20EUR