4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Extension MPX-MPX 20 cm temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock
Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock	XT-60 connector (male) temporarily out of stock

Quick Find

Shopping Cart

1 x	Small pinned hinge (12 uds)
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Glases Ace
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Glases Flitemaster
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge
1 x	15 mm reinforced hinge
1 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	18 mm reinforced hinge
1 x	Glases Stratus
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	25 mm reinforced hinge
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Glases Nimbus "Black"
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
2 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Gates hinge aluminium (1 pcs)
3 x	Glases Aspen
3 x	Glases Innovation Plus
1 x	Long pinned hinge (6 uds)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	Crimping tool
1 x	Servo NARO Max Std
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Screwdriver for Torx® TX6
1 x	Z Bender - S Type Tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Screwdriver for Hexagon 1,5mm
1 x	Hot Glue Stick GREEN
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Xplorer4 anemometro
1 x	Xplorer2 anemometro
1 x	Xplorer1 anemometro
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Extension silicon 100 cm (Graupner)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller)
1 x	270 mm 3/3 mm shaft ship
1 x	Adap/Exten for Futaba 12-14C
1 x	Soporte filtro FESTO (4 pcs)
3 x	Glases Moritz
2 x	Actuador lineal HLS12-100210-7.4v
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Large flex hinge (12 uds)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
3 x
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Buy Perforated film 100 cm / 10 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Hovercraft sailcloth
1 x	120x60 mm SLH KOVO wheel
1 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x
1 x	LA500 housing-lower cyclic
1 x	LA500 housing-upper cyclic
1 x	LA500 rotor head core
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Head core bushing
1 x	Cierva C30 Elevator
1 x	Transmitter Balancer Futaba T-10CG
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Cierva C30 Body Spain
1 x	Head lower part
1 x	Wheel keeper washer
1 x	Ball joint long
1 x	Rotor Mast
1 x	LA500 pre-rotation gear
1 x	LA500 nose
1 x	Steering lever
1 x	LA500 cyclic central part
1 x	LA500 tail empennage
1 x	Cierva C30 simulated motor
1 x	LA500 pre-rotation gear hub
1 x	Raer wall
1 x	LA500 rotor head shaft
1 x	Pilot LA 500
1 x	Head spacer
1 x	LA500 Blades
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Slider Extenion for CORE
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Motor KAVAN PRO 2225-1600
1 x	Crystal TX 35.180 Ch 78
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Buy Perforated film 100 cm / 50 m
1 x	Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Foam plastic plates (310x210x8 mm)
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Styrene plate 320x120x1.0 mm
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	LUCAS pilot ARTF
1 x	Set cintas unión paracaídas 145 cm
1 x	Trike XL motor set (motor+esc+prop)
1 x	Aramid 50 daN 50 m
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	IKARUS plane
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Bird (Aero-naut)
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
2 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	TWIST planeador gomas
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Foam plastic plates (310x210x5 mm)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x	Fiberglass plate 620x540x0,2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Windsock Ozone L - 700 mm
1 x	Paramotor BackPack XXS (without accessories)
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Parachute BACKUP X100
1 x	Para-RC Mix
1 x	Wing OXY 0,5 pulgadas2
1 x	Parachute P4
1 x	NF-3X-80 liner Kit

9,102.18EUR