10.50EUR

Chopped glass fibre strands 3 mm
[R2101002]

Chopped glass fibre strands 3 mm (1 Kg)

Fast, good wetting
Ideal for polyester resins due to the coating, well suited for epoxy resins

Technical data:
Fibre type: E-Glass
Shape in section: Round
Fibre coarseness: 9–14 µm
Length: 3 mm ± 5 mm
Specific gravity: 2.53–2.55 g/cm³
Resistance to dry heat: ca. 315 °C
Softening temperature: approx. 840 °C
Moisture content on delivery: max. 0.3 %
Colour: White
Surface treatment: Silane based 0.5–1.5 %

Resistance to light, to weather, to ageing = good
Acid resistance = good
Alkali resistance = limited
Solvent resistance = good
Swelling value in water = 0 %

Applications:
Fibre pastes and moulding compounds, synthetic plasters, putties, adheslves, corrosion protection coats, asbestos substitutes. In the case of coupling layers to fill and back up edges and embed alignment dowels and screw unions in mould construction, a mixture of 50 % vol. chopped glass fibre and 50 % vol. cotton flock is mostly used. The volume details are intended to assist in judging the amount supplied. These details refer to the loose bulk amount. The contents may become compressed during transport or storage

under request

Reviews

Quick Find

Shopping Cart

1 x	Premium servo extension 50cm
2 x	Extension silicon 10 cm (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Futaba male 40 cm extension
2 x	Premium servo extension 100cm
2 x	200 mm extensión servo HITEC/JR
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 20cm
2 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	DYNAMOMETER S-1580
2 x	Extension 30 cm (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Futaba Female 40 cm extension
2 x	Extension silicon 35 cm male (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Circlick securite
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Crimping tool
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Turbina KINGTECH K320 G5
1 x	Conector MR-60 (pareja)
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Silent-blocks DLE 170M
1 x	AX-60 starters (5 pcs)
1 x	Green smoke canister 140 g
2 x	Red smoke canister 65 g
1 x	White smoke canister 100 g
2 x	White smoke bombs AX-3 (10 pcs)
1 x	Yellow smoke canister 100 g
1 x	Smoke set "Glider"
1 x	Yellow smoke canister 65 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Ventral support for AX-18/AX-60
2 x	Initior Receiver FRX2 Wireless
2 x	Red smoke bombs AX-60 (5 pcs)
2 x	Parachute expulsion foam
1 x	Red smoke canister 140 g
1 x	B4-0 rocket charges (6 pcs)
1 x	Xplorer2 anemometro
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Flap hinge (6 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Extension silicon 75 cm (Graupner)
1 x	Extension silicon 25 cm (Graupner)
1 x	Optical RPM Sensor
1 x	Hovercraft sailcloth
1 x	RX cabel
1 x	Baseplate servo
1 x	Propeller POWER-PROP 13x9
1 x	Propeller APC 14x8.5 Electric Pusher
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
2 x	Extension silicon 30 cm male (Graupner)
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	2,3 mm Prop Drive Günther M4
2 x	3 mm Short Prop Adapter M5
1 x	Hardener P-25, canister 2.5Kg
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	Pegamento Pu R 50g polyuretano
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	White gelcoat 1 Kg
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Big Crow DLE-170M
1 x	3 mm Long Prop Adapter M5
1 x	2 mm Prop Adapter M5
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Fiberglass plate 350x150x0.5 mm
1 x	SERVO HOLDER
1 x	Adjustable launching hook
1 x	Premium servo extension 75cm
1 x	5 mm Prop Adapter M6
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Digital scale up to 40 kg
1 x	UHU Por 50ml/40g
1 x	UHU hart 35 g
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	4 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M5
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	"S" set for boats
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	BlueCom™ Adapter (Android / WP)
1 x	2 piece mounting frame
1 x	SKY MASTER 3.000 mm ARF
1 x	Bidule 111 3000 mm
1 x	Fiberglass plate 620x540x0,2 mm
1 x	Extension silicon 50 cm (Futaba)
1 x	IKARUS plane
1 x	Adapter lead MPX/EC3
1 x	Conector JR Servo female (50 pcs)
1 x	External LED's (2 pcs)
1 x	MicroMatch PowerBox
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	30 cm DEANS female connector
1 x	BlueCom™ Adapter (iOS)
1 x	Extension for SensorSwitch 60cm
1 x	2 piece mounting frame
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Cable set Premium™ MAXI "one4two"
1 x	Extension for SensorSwitch 30cm
1 x	Extension for LC-Display 50cm
1 x	Altimeter Altis NAO
1 x	Neumatic retractable landing gear (Aero-Naut)
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Blade Holder (3 blades)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Tail tube RAINBOW
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	38x4,5 mm wires output (2 pcs)
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Kavan Car 25% nitro 1l
1 x	Propeller 11x4,7 SlowFlyer
1 x	Propeller 3x2
1 x	Manometer 4 mm
1 x	Propeller 8x4 Electric
1 x	Propeller 8x4,3 SlowFlyer
1 x	PRO-HV Dual Action Valve
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	Carburetor DLE 20
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
2 x	Mould Resin P 10 kg
1 x	Hardener Aero EPH 161 (500 g)
1 x	DLE-55RA Ignition unit
1 x	DLE 111 Carb gasket (V1)
1 x	Epoxy Resin L (2.5 Kg)
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)

15,075.00EUR