Top » Catalog » R-G.de » R1501032

4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

XT-60  connector (male)
XT-60 connector (male)

temporarily out of stock
temporarily out of stock

Cyano SUPER - GOLD™ THIN (12g)
Cyano SUPER - GOLD™ THIN (12g)

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 13 mm wing servo holder
1 x Servo TOPMODEL DS1413 T
1 x 18 mm wing servo holder
1 x 50x45 mm micro-mini servo cover
1 x Servo TOPMODEL DS9010 T
1 x 11 mm wing servo holder
2 x 90x60 mm standart servo cover
1 x Servo TOPMODEL S7520 MG
1 x 65 mm mini servo cover
1 x Servo TOPMODEL STANDARD S3217
1 x 57 mm micro-mini servo cover
1 x Vacuum pump 12 CFM
2 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Starter EM Gear Power 80
1 x Hot Glue Stick BLACK
1 x Steering arm 16 mm Ø 3 mm
1 x Dust collector for mould cleaning
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
2 x Screw-lock connector M2 (2 uds)
2 x Ball Link Plier
2 x Copier 5x20 cm pcs
1 x Canopy Latch
1 x Screwdriver for Torx® TX6
1 x 2,0x50 mm allen screwdriver
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x 2,5x60 mm allen screwdriver
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Screw-lock connector Ø 2 mm (2 uds)
2 x 
2 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Hot Glue Stick GREEN
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Digital precision scale up to 2000 g
2 x Locking cable tie 4.6x203 (uds)
1 x Ball Link Plier
1 x 1,5x50 mm allen screwdriver
1 x Stainless steel cable Ø 0.62 mm (10 m)
3 x Disposable Injector Bags (30x16cm) 100 pcs
2 x Starter 12v (Max 90 and 15ccm)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Z Bender - S Type Tool
2 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Covered closure or fairings
1 x Cut tube
1 x Cap closure 33/23.5mm (2 uds)
2 x Cierre cabina aluminio Ø4, I=10 mm
1 x Starter Sullivan-STAR 603 DINATRON
1 x 3,0x60 mm allen screwdriver
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Z Bender - S Type Tool
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Locking cable tie 2.5x100 (uds)
1 x Vacuum pump P1-N
1 x Screwdriver for Torx® TX8
1 x Hot Glue Stick RED
2 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x One touch canopy lock
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
2 x Cabin latch Fox MDM1 4m (pair)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Screwdriver for Hexagon 1,5mm
1 x Screwdriver for Hexagon 1,27mm
1 x Steering arm 12 mm Ø 4 mm
1 x Angle measurer
1 x Field folding model stand
1 x Truck-trailer for gliders 720 x 285 mm
1 x 25 mm carbon servo arm
1 x Horns set HS-65HB/MG, 5065MG
1 x Propeller balancer
2 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x MIG 29 3D RTF, Servo
1 x Truck-trailer for gliders 720 x 239 mm
1 x Field folding model stand SebArt
1 x Fast attachment for servos (25 pcs)
1 x Aluminium servo arm (2 uds)
1 x SSPS105 Super Hi-Power servo
1 x Futaba 76/92 mm servo pull-pull double arm with ball link
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Parachutist
1 x Threaded coupler M2 (10 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x 90x75 mm standart servo cover
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Mini-handed clamp
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Cable grommet Ø 4 mm (4 uds)
1 x PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH
1 x 90 mm rods + T patellas set for direction control
1 x Clip mini fixing for wing (2 pcs)
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
3 x Copier 2x20 cm pcs
1 x Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Metal gear set for HS81MG/5082MG
1 x Dean-T Plug Mold
1 x Servos security connector (2 pcs)
1 x Servo GO-02 Digital 1.8g
1 x Digital scale up to 40 kg
1 x Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x Servo BLS-M55B 61.2kg
1 x Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x OPTOTRONIX Aurora LCU
2 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x 
1 x XT-60 connector (female)
1 x Bag connector 2 mm
1 x Protector Connector Dean-T (1 pair)
1 x Connectors MPX black male
1 x MPX PCB "4 Pins", 5 pieces
1 x Wing connector 8pin with pin strip, plug & socket
1 x Soldering PCBs 8pin, 5 pieces
1 x MPX housing with flange (4 pcs)
1 x Mounting frame MPX male connector
1 x MR30 connector male
1 x Mounting frame MPX female connector
1 x 30 cm MULTIPLEX female connector
1 x Connectors MPX black female
1 x Conector XT-30 (macho)
1 x Kontronik connector (10 connectors, 5 pairs)
1 x XT60 Connector with Holder Male 2pcs
1 x Wing conexion 2 servos JR/Graupner 50 cm
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x PROXXON - SAW BLADE 8MM 0ZI220E
1 x 40 mm air cylinder
1 x CA Glue fast 20g
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x ABS tube 3.0x1.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x ABS tube 9.0x8.0x1000 mm
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Buy Perforated film 145 cm / 50 m
1 x Buy Perforated film 100 cm / 10 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
6,216.35EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies