390.01EUR

Epoxy 40 min (Resin). 25Kg
[R1001353]

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

Suitable hardeners for Epoxy Resin L:

Hardener S
Potlife: 20 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 139-0 to 100 140-5

Hardener L
Potlife: 40 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 144-0 to 100 145-5

Hardener EPH 161
Potlife: 90 minutes
Mixing ratio: 100 : 25 parts by weight resin to hardener, 100 : 49 parts by volume resin to hardener
Order no. 112 123-5 to 112 125-4

Hardener EPH 500
Potlife: 60 minutes
Mixing ratio: 100 : 63 parts by weight resin to hardener, 100 : 71 parts by volume resin to hardener
Order no. 100 147-2 to 100 147-8

Hardener W 300
Potlife: 300 minutes
Mixing ratio: 100 : 35 parts by weight resin to hardener, 100 : 42 parts by volume resin to hardener
Order no. 100 149-4 to 100 149-7

Hardener GL 1
Potlife: 30 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 095-3 to 104 095-7

Hardener GL 2
Potlife: 210 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 100-3 to 104 100-7

Hardener CL
Potlife: 60 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 109 285-H-3 to 109 285-H-6

Please order hardener separately

under request

Reviews

Quick Find

Shopping Cart

2 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
2 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fibre sandwich sheet 350x150x3 mm
3 x	Aluminium sheet 500x250x0,5mm
2 x	ABS 500 x 400 x 2,0 mm (white)
2 x	ABS 500 x 400 x 1 mm (white)
3 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
3 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
3 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
3 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Buy Perforated film 145 cm / 50 m
1 x	Buy Perforated film 100 cm / 50 m
2 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
2 x	ABS 500 x 400 x 0,5 mm (white)
2 x	Vest clothes Hispano Aviación
3 x	Softshell Hispano Aviación
2 x	Cap Hispano Aviación
3 x	Shirt Hispano Aviación
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Styrene plate 320x120x1.0 mm
2 x	PVC grid diagonal 290x185x0.32 mm
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x	Foam plastic plates (310x210x3 mm)
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Foam plastic plates (310x210x2 mm)
1 x	Glass fabric 25 g (2 m²)
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Chopped glass fibre strands 3 mm
2 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Film release agent PVA 25 ml
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Vasa model Catapult
1 x
1 x	SE Ring 450 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Tape GFK 50 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Ring 320 mm length (5 pcs)
2 x	20x200 mm battery rings
2 x	Cinta Goldfix 1m
1 x	SE Ring 360 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x
1 x	Tape GFK 25 mm
1 x	Spikes Band (5 m)
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Jeti Black cap
1 x	SE Ring 250 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	SE Ring 330 mm (4 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Flap hinge (6 pcs)
1 x	Optotronix Aurora Plug
1 x	Buy Perforated film 100 cm / 10 m
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Steering lever
1 x	Cierva C30 simulated motor
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
3 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x	Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support FUEL DOT V3
2 x	Carbon plate 500x400x2.0 mm ISOTECH
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Fiberglass plate 620x540x1,0 mm
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	Digital scale up to 40 kg
1 x	Foaming agent for epoxy resins 200 g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	CA Glue (medium) 20g
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
1 x	18 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Servo NARO Max Std
1 x	Indoor hinge with servo arm integraded
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Medium pin type hinge (12 uds)
2 x	160 mm carbon undercarriage (2pcs)
1 x	Legs + electric brakes for Viper Jet 90
1 x	Oracover Brown 2 m
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x	PT 21x13 EL Propeller
1 x	Wheel keeper washer
1 x	Blade holder upper
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Head lower part New
1 x	Ball joint long
2 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x	Manual Controller
1 x	Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr
1 x	ER-50eVo Set A [2x ER50 + RB-45]
1 x	PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	ER40 Front Leg (with wheel 80mm)
1 x	Actuator Electric 25 mm
1 x	Wheel Ø 75 mm (1 ud) Electron Retracts
1 x	Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x	E_brakes electronics
1 x	10-15mm Servo Arm
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	10-15mm Servo Arm HITEC
1 x	RB-45 Electronic
1 x	Electric Landing Gear ASPIRE (Elektron Retracts)
1 x	Electromagnets brake
1 x	Wheel 115 mm with electromagnet and brake disk (2 uds)
1 x	Set Legs + Wheels with brake ASPIRE
1 x	Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts)
1 x	RS-200 Touch Programmer
1 x	Nose wheel 62 mm
1 x	ER-40eVo Set B [Complet Set + GS200]
1 x	ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x	PT 20x13 EL Propeller
1 x	PT 21x13 EL Propeller 3 Blade
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
1 x	120x60 mm SLH KOVO wheel
1 x	Bearing 3x6x2,5
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Head core
1 x	Head upper part
1 x	Screws flush mount M2
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
2 x	Carbon plate 550x350x1.5 mm ECOTECH
1 x	Carbon plate 350x150x5.0 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
2 x	Vacuum bag, 1200 mm x 50 m
1 x	Blade holder center
1 x	Kerostarter K30G
1 x	Turbine KINGTECH K100 G4
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Carbon plate 550x350x1.0 mm ECOTECH
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 20m
2 x	Support ECU Xicoy X-45
1 x	Soporte grifo FESTO (2 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Turbina KINGTECH K260 G4
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Battery LiFe -1450/25C-3S 9.9V
1 x	Turbina KINGTECH K55G4
1 x	Turbina KINGTECH K142 G4M
1 x	Turbina KINGTECH K70G4
1 x	Exhaust K45TP
1 x	Colador RABBIT
1 x	KingTech K45TP G4 Turboprop
1 x	Spark Ceramic JETCENTRAL
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller)
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	Buy Perforated film 100 cm / 20 m
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Carbon plate 1000x500x2,0 mm ECOTECH
1 x	Rigid coupling brass Ø 3 mm L: 20 mm
1 x	Recessed MPX connector support (6 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Propeller CFK 18x16
1 x	Propeller RF CFK 14.5x14
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x
1 x	Receiver GRAUPNER GR-12 HoTT
1 x	FOAM - CURE™ (24g)
1 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x	Marker ties (20 pcs)
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x	DSM 10 Dual Switch Mixer
1 x	Nose leg 155 mm with wheels 70 mm
1 x	SU 29S 140 carbon landing gear
1 x	Fiberglass landing gear for 140-160
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Ply-Span 450x600/13g Yellow
1 x	290 mm M5 Prop shaft
1 x	Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x	MB-339 Aermachi 84" ARF c/retractil electric
1 x	Foam plastic plates (310x210x5 mm)
1 x	Support Filtro FESTO
1 x	Servo HITEC D-955 TW Titanium
1 x	Propeller CFK 18x17
1 x	Futaba F14 Twin Boat Stick
1 x	Propeller CFK 17x13
1 x	Futaba Multi-Switch-Prop 12+2 MODUL
1 x	Propeller CFK 18x19
1 x	Propeller CFK 20x13
1 x	Mono-Switch Memory FUTABA
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Propeller CFK 23x12
1 x	UHU Por 50ml/40g
1 x	Micro Crystal RX 35.140 Ch 74
1 x	Propeller CFK 20x13 "white"
1 x	FUTABA F14 + R168DF + Servo S148
1 x	resin-hardener package L-385 with hardener H-385
1 x	Epoxy 5 min. 500 g (Hardener)
1 x	Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x	Crystal Universal RX 35.090 Ch 69
1 x	Cyano SUPER - GOLD™ (12g)
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Receiver GRAUPNER GR-16 HoTT
1 x	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)

46,113.77EUR