17.00EUR

Hardener Aero EPH 161 (500 g)
[R11212505]

Hardener Aero EPH 161 (500 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	PPM Encoder Module
1 x	Tube Pitot to PIXHAWK
1 x	Bungee HLG Premium
1 x	20 g tin paste
1 x	Hobbylite Filler, Balsa colour
1 x	Spray Graphit 33
1 x	500 ml sealer (DOPE)
1 x	Spannlack 1000 ml
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	1000 ml sealer (DOPE)
1 x	Plasti Dip Liquid Tape 429 ml black
3 x	Straightened rod Ø 0.5 mm x 1000 mm
3 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1000 mm
4 x	Straightened rod Ø 2.5 mm x 1000 mm
3 x	Straightened rod Ø 4.5 mm x 1000 mm
3 x	Brass hexagonal rod Ø 5 mm x 1000 mm
3 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Straightened rod Ø 0.8 mm x 1000 mm
3 x	Straightened rod Ø 7.0 mm x 1000 mm
5 x	Straightened rod Ø 2.0 mm x 1000 mm
5 x	Straightened rod Ø 14.0 mm x 1000 mm
4 x	Straightened rod Ø 5.5 mm x 1000 mm
3 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened threaded rod M2-1m
3 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Straightened threaded rod M3 - 1m
1 x	Glases Stratus
1 x	Glases Nimbus
1 x	Glases Ace
1 x	Glases Flitemaster
1 x	Glases Innovation Plus
2 x	Glases Nimbus "Black"
1 x	Glases Moritz
1 x	Banna gold connector 2,5 mm (M/F)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Oracover White 2 m
1 x	Oracover GREY Seafire Sea 2m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Cinta Goldfix 1m
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	Support ECU Xicoy X-45
1 x	Parachute XTRALITE S
1 x	Suncover 100cc Red
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	T-Motor U7-V2.0 Kv420
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Green smoke canister 100 g
2 x	Initior Transmitter FTX2 Wireless
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Yellow smoke canister 100 g
1 x	Grafas ARF 3.0 m (Top Model)
1 x	Red smoke canister 100 g
3 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Ventral support for AX-18/AX-60
1 x	Yellow smoke canister 140 g
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
2 x	Servo Tester
1 x	SATORI 2 PRO V C64 F5J
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Smoke set "Glider"
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Propeller POWER-PROP 13x9
1 x	Long ball link M1.6 (6 uds)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
2 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1500 mm
3 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Professional Servo tester
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Angle support XT60 conector
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Support pumb/filter Xicoy X45
1 x	TMM 2512-3S heli
1 x	Support FUEL DOT V3
1 x	Support Pitot JETI
1 x	CC 02
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	CC 01
2 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	Esc MasterSPIN 16 Pro
1 x	Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x	Soporte servo KST X10 mini / DS135MG
1 x	Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	Charger ISDT 608AC 200W
1 x	HITEC DPC-11 programmer
1 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Flap hinge (6 pcs)
1 x	Charger 220/110v
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
3 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	ULTRA STICK 30 cc ARF
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	EDGE 540-A 74" (1880 mm)
1 x	Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	LASER 73" 1.85m (05) PILOT
1 x	Esc MasterSPIN 99 Pro OPTO
1 x	Esc MasterSPIN 100 Pro
1 x	Gracia Maxi ARF (Top Model)
1 x	Q-12 X-light 2000 mm Electric
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Servo KST X10-710 V8.0 7.5Kg HV
1 x	SKY RC T400Q Charger 4x100w
1 x	Adaptadores carga 6s JST-XH
1 x	Servo inverter
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	CA Glue fast 20g
1 x	Epoxy 5min KAVAN 2x 100g

16,802.12EUR