4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock
Sparkplug NGK CM6 temporarily out of stock	XT-60 connector (female) temporarily out of stock	XT-60 connector (male) temporarily out of stock

Quick Find

Shopping Cart

1 x	30 cm MULTIPLEX female connector
2 x	Connectors banna oro 0,8 mm (M/F)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Conector JR Servo female (10 pcs)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Conector BEC male (10 pcs)
1 x	Conector JR Servo male (10 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors banna oro 2 mm (M/F)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Conector JR Servo female (10 pcs)
1 x	Connector CAN 15
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Connectors DEANS (T)
1 x	30 cm DEANS female connector
1 x	Bag connector 2 mm
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Copier 5x20 cm pcs
2 x	Propeller balancer
2 x
1 x	Propeller balancer
2 x	Z Bender - S Type Tool
2 x	Vacuum pump P1-N
2 x	3,0x60 mm allen screwdriver
1 x	Surface Indicator Gauge Small
2 x	Crimping tool
3 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
3 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	1,5x50 mm allen screwdriver
1 x	Cut tube
2 x	Digital precision scale up to 2000 g
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Hot Glue Stick GREEN
2 x	Starter Sullivan-STAR 603 DINATRON
2 x	Starter EM Gear Power 250
2 x	2,5x60 mm allen screwdriver
1 x	Medidor ángulos y/o incidencias
2 x	Screwdriver for Hexagon 1,5mm
1 x	Copier 2x20 cm pcs
1 x	Hot Glue Stick BLACK
1 x	WingFix ULTRA Black Edition
2 x	Hot Glue Stick RED
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Field folding model stand
1 x	Ball Link Plier
1 x	Screwdriver for Torx® TX6
1 x	2,0x50 mm allen screwdriver
2 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x	Starter 12v (Max 180 and 30ccm)
2 x	BALSA triangular 10x10x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
2 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	BALSA trip 3.0x5.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
2 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
2 x	Mahogany wood slat 2.0x2.0x1000 mm
2 x	BALSA trip 10x10x1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
1 x	LOWER TOW HOOK
1 x	Conector JR Servo male (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Conector BEC female (10 pcs)
1 x	BEC 3A FOXY
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Conector FUTABA Servo female (10 pcs)
2 x	Dust collector for mould cleaning
1 x	Starter EM Gear Power 80
2 x	Z Bender - S Type Tool
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
2 x	Fabric scissors curved Premium, 16 cm / 6" length
2 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
3 x	Propeller diller for DLE111 and DA85-150
1 x	Truck-trailer for gliders 720 x 239 mm
2 x	120x60 mm SLH KOVO wheel
1 x	Liferaft 47 mm
1 x	Angle of incidence meter
1 x	Ball Link Plier
2 x	Angle measurer
2 x	Vacuum pump 12 CFM
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Smoke set "S"
1 x	Blue smoke canister 100 g
1 x	Initior Receiver FRX2 Wireless
1 x	Green smoke canister 140 g
1 x	Electric rocket starters (6 pcs)
1 x	Blue smoke canister 140 g
1 x	Yellow smoke canister 100 g
1 x	800TVL CMOS camera for FPV
1 x	Initior Transmitter FTX2 Wireless
1 x	AX-60 starters (5 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	3l Smoke oil
1 x	AX-60 starters (5 pcs)
1 x	Softshell Hispano Aviación
1 x	Balsa panel 1.5x100x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Bandera Frankr 4x6
1 x	Ancla 35 x 22 mm (2 pcs)
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x	MG cannon 1.8 cm (5 pcs)
1 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH
1 x	Propeller diller for DLE170
1 x	Rubber Insert hard, 1 Pcs.
1 x	Screwdriver for Hexagon 1,27mm
2 x	Tool for entel
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	CA Glue fast 20g
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Smart Soldering Iron 110W/230V AC
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Sub-D Plug Mold
1 x	25 mm Sandpaper file
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Tube bender
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Screwdriver for Torx® TX8
1 x	Schul-Malpinsel Gr.5
1 x	Pump hose (Ø 6/8 mm) transparent
1 x	PROXXON - SAW BLADE HSS (50MM - 100T) (28020)
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Mini Lock Grips 2PCS
2 x	XT-60 Plug Mold
1 x	Sealing Iron STANDARD
1 x	Digital scale up to 40 kg
1 x	Universal Filter
1 x	PROXXON - SAW BLADE DIAMOND OZI/E
1 x	Roller cutter 28 mm
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Propeller diller for EME35 and DLE35
2 x	Pistola termica MH 550 micro
2 x	MPX plug mold V1
1 x	Propeller drill jig DA-35/50/60/70
2 x	Mini Infrared Thermomiter
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
2 x	Mold plugs XT-90
1 x	Mini-handed clamp
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Welder 100W/200V
1 x	PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x	Tachometer HANGAR 9 digital
1 x	Propeller diller 5/6,3/8/9
1 x	Tool for entel
1 x	Sandpaper file 13 mm
1 x	Rubber Insert soft, 1 Pcs.
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Propeller diller for DA50, DLE55 red
1 x	Laminating brush 10 mm, pack/ 50 pcs
2 x	MPX 8 pins plug mold
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Sealing Iron Profi LCD
1 x	Heat Seal Iron
1 x	PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Buy Perforated film 145 cm / 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m

9,319.44EUR