390.01EUR

Epoxy 40 min (Resin). 25Kg
[R1001353]

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

Suitable hardeners for Epoxy Resin L:

Hardener S
Potlife: 20 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 139-0 to 100 140-5

Hardener L
Potlife: 40 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 144-0 to 100 145-5

Hardener EPH 161
Potlife: 90 minutes
Mixing ratio: 100 : 25 parts by weight resin to hardener, 100 : 49 parts by volume resin to hardener
Order no. 112 123-5 to 112 125-4

Hardener EPH 500
Potlife: 60 minutes
Mixing ratio: 100 : 63 parts by weight resin to hardener, 100 : 71 parts by volume resin to hardener
Order no. 100 147-2 to 100 147-8

Hardener W 300
Potlife: 300 minutes
Mixing ratio: 100 : 35 parts by weight resin to hardener, 100 : 42 parts by volume resin to hardener
Order no. 100 149-4 to 100 149-7

Hardener GL 1
Potlife: 30 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 095-3 to 104 095-7

Hardener GL 2
Potlife: 210 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 100-3 to 104 100-7

Hardener CL
Potlife: 60 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 109 285-H-3 to 109 285-H-6

Please order hardener separately

under request

Reviews

Quick Find

Shopping Cart

1 x	Flat washer 1.7 mm (20 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
2 x	Flat washer 4.3 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
2 x	Circlik for shaft 1.9 mm (10 pcs)
2 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
2 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
3 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
2 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Foaming agent for epoxy resins 200 g
2 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	Release wax 250ml
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Steering arm 16 mm Ø 3 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Locking cable tie 4.6x203 (uds)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	SUS wire 3m (nylon coated)
1 x	Xplorer3 anemometro
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
2 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Socket Head Screw M2x5
1 x	Treaded hexagonal socket insert M4 Br (4 pcs)
1 x	Suncover 100cc Red
1 x	Blind nut M3 (4 pcs)
1 x	Support Filtro FESTO
1 x	Support ECU Xicoy X-45
1 x	15 mm floating pad (30 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Socket Screw M3x9 mm
1 x	Screw M2.5x10 (10 pcs)
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Universal Colour Paste deep black 50 g
1 x	Film release agent PVA 25 ml
4 x	Hardener P-25, canister 2.5Kg
2 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Buy Perforated film 100 cm / 20 m
2 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
2 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Latex Gloves GRIP, size L, box/ 100 pcs
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x	Fiberglass plate 620x540x1,0 mm
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Universal Colour Paste white 50 g
1 x	Fiberglass plate 620x540x0,2 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Hovercraft sailcloth
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Servo NARO Max Std
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	ANGEL 48" pp orange/black/white
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Support conector MPX (6 pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support FUEL DOT V3
1 x	Support Flush MPX Conector (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	Propeller hub spacer 8/5.5
1 x	Threaded insert M5 (10 pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Socket Head Screw M2x8
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	9x4.7 * 22x12 carbon propeller
1 x	Screw M2.5x8 (10 pcs)
1 x	Lock nut M2 (20 pcs)
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	Spinner INOVA 45 mm White
1 x	DLE 55 carburetor
1 x	Suction funnel for carburetor 90D-L (red)
1 x	Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x	Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x	Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x	Conector BEC female (10 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	Spinner INOVA 63 mm White
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	MEKP Harderner 100 g
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x	SAITO FG-36 carburetor

6,495.84EUR