Top » Catalog » R-G.de » R1501032

4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

XT-60  connector (male)
XT-60 connector (male)

temporarily out of stock
temporarily out of stock

Cyano SUPER - GOLD™ THIN (12g)
Cyano SUPER - GOLD™ THIN (12g)

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Propeller POWER-PROP 14x9 Izda
1 x Propeller POWER-PROP 13x9 Izda
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Propeller POWER-PROP 13x9
1 x 2,5x60 mm allen screwdriver
3 x 
1 x Screwdriver for Hexagon 1,5mm
1 x Z Bender - S Type Tool
1 x Copier 2x20 cm pcs
1 x USB Mini Camera endoscope
1 x Hexagonal ball head 2.0 x 50 mm
1 x Crimping tool
1 x Starter 12v (Max 90 and 15ccm)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x Crimping tool
1 x Z Bender - S Type Tool
2 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x 1,5x50 mm allen screwdriver
2 x Hot Glue Stick BLACK
2 x Digital precision scale up to 2000 g
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x 800TVL CMOS camera for FPV
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Starter Sullivan-STAR 601
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x 
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Hot Glue Stick RED
1 x Ball Link Plier
1 x Vest clothes Hispano Aviación
1 x SE Ring 240 mm (2 pcs)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Premium servo extension 100cm
1 x Support XT60 conector (2 pcs)
2 x Support Pitot JETI
2 x Support pump Xicoy X45
1 x Mobile Terminal
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Kavan Car 25% nitro 1l
1 x Motor KAVAN PRO 2225-1600
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Receptor CORE PBR-26XS 26ch
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x OS 40-FG 4T Motor
1 x Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x 3,0x60 mm allen screwdriver
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x Heat Seal Iron
1 x DPS Switch JR/JR
1 x DUPLEX 2.4EX Central Box 210
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x 
1 x Kwik link unmount tool
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Screwdriver for Hexagon 1,27mm
1 x Starter Sullivan-STAR 603 DINATRON
1 x 15 mm reinforced hinge
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x 18 mm reinforced hinge
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Long pinned hinge (6 uds)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
2 x Soporte grifo FESTO vertical (1 pcs)
1 x GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
1 x Propeller CFK 13x9
1 x Propeller CFK 18x9
1 x Propeller RF CFK 10x17
1 x Propeller CFK 14x6.5
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Buy Perforated film 100 cm / 50 m
1 x SCANNER 46-55 Sport Scale 1:7 ARF
1 x PARAGON Trainer 46-55 1580 mm
1 x DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
1 x DUPLEX 2.4EX Satellite receiver Rsat 2
1 x DUPLEX 2,4GHz MRPM-AC EX
1 x Llave dinamomterica 74 Z 0 0 21
1 x Starter EM Gear Power 80
1 x 50m servo "Premium" wire (white/red/blue)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x SCHARNHORST accessories
1 x Support conector MPX (6 pcs)
1 x Xoar Electric Beechwood Prop 20x10
1 x Tirpiz Battleship 1:200
1 x 5 mm Prop Adapter CN-Spinner
1 x 4 mm Prop Adapter M6
1 x Xoar Electric Beechwood Prop 16x7
1 x 3 mm Prop Adapter M6
1 x Soporte grifo FESTO (2 pcs)
1 x Support pumb/filter Xicoy X45
1 x PropCover 16-20" (2 pcs)
1 x VITAPROP CARBON FOLDING PROP 15x9.5"
1 x Propeller CFK 14.5x10 Slim
1 x Propeller CFK 18x17
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x Bidule 170 ARF 3.48 m
1 x Epoxy MID-CURE™ 15 min (130g)
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Buy Perforated film 100 cm / 20 m
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x CA Glue (medium) 20g
10,554.57EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies