11.00EUR

Hardener Aero EPH 161 (250 g)
[R1121250]

Hardener Aero EPH 161 (250 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Oracover Azul 2 m
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover Black 2 m
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	1,6x1000 mm 2:1 black termoretract tube
2 x	Oracover Brown 2 m
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	19 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Monokote BLUE metalizado (1.8x0.65m)
2 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	PPM Encoder Module
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Extractor piñones 2.3/3.2 mm
1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita 27x14x7 mm
2 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
2 x	Trailing edge BALSA 35x8x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Quicklock washer 4 mm (10 pcs)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Conector BEC male (10 pcs)
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x
1 x	Round Rod 2,5x1000 mm
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
1 x	Extension silicon 50 cm (Graupner)
2 x	Futaba male 40 cm extension
1 x	ABS tube 9.0x7.0x1000 mm
1 x	120x60 mm SLH KOVO wheel
2 x	Tube support Ø 6mm (10 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Motor OS 3820-1200 electric
1 x	10 mm gas motor standoff
1 x	1000 cc gasoline fuel tank complet
1 x	280 cc gasoline fuel tank complet
1 x	110x55 mm C SLH KOVO wheel
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension 15 cm (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Extension silicon 30 cm male (Graupner)
1 x	100x50 mm SLH KOVO wheel
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	25 mm carbon servo arm
1 x	110x55 mm SLH KOVO wheel
1 x
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Motor OS MAX 120 AX
1 x	Support XT60 conector (2 pcs)
1 x	Support Filtro FESTO
1 x	Recessed MPX connector support (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support ECU Xicoy X-45
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Support pumb/filter Xicoy X45
1 x	Support FUEL DOT V3
1 x	Support pump Xicoy X45
1 x	Carburador SAITO FA-120 4S glow
1 x	Motor OS 50 SX-Hyper
1 x	Motor OS MAX 160 AX
1 x	OS GT15 W/E-4040 for airplane
1 x	Motor OS FS 75 AX
1 x	Motor KAVAN PRO 2225-1600
1 x	Motor OS FS 95 V 4T
1 x	Motor Mega AC 16/25/06
1 x	Motor A40-10 L V2 14-Pole Glider
1 x	Motor Mega AC 16/10/03 RACE
1 x	Motor Mega AC 16/25/01E 3.17mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carburador OS (Type 40K) 46AXII
1 x	Extension silicon 35 cm male (Futaba)
1 x	Motor A30-12 L V4
1 x	Motor A60-5XS V4 28-pole kv420
1 x	Motor Mega AC 16/35/01
1 x	Motor Mega AC 16/07/12
1 x	Motor Mega AC 16/25/04
1 x	Motor A20-22 L EVO
1 x	A40 Backmountset complete
1 x	A50 Backmountset complete
1 x	Motor Mega AC 22/30/02
1 x	Motor A30-12 XL Glider
1 x	Motor A200-8
1 x	Motor Mega AC CAR 10 PRO
1 x	Motor Mega AC 16/15/07 COMBAT
1 x	Axle for motor A50-L
1 x	Actro 32-3 Heli MAX 5mm
1 x	Gear set HITEC HS-65 HB
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Foaming agent for epoxy resins 200 g

10,893.43EUR