11.00EUR

Hardener Aero EPH 161 (250 g)
[R1121250]

Hardener Aero EPH 161 (250 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	MYLAR film A350 (1000x500 mm)
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	19 mm 2:1 black termoretract tube
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover Azul Cielo 2 m
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	12.7 mm 2:1 black termoretract tube
1 x	Oracover Azul 2 m
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Oracover Black 2 m
2 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	Pine wood slat 10x10x1000 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
2 x	M3-M4 rubber washer (8 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Oracover Red 2 m
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Large flex hinge (12 uds)
1 x	PIX Hawk with accesories
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Support ECU Xicoy X-45
1 x	TMM 2512-3S heli
1 x	Program 5v SIO RS 232
1 x	Crystal Universal RX 35.170 Ch 77
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	Crystal Universal RX 35.070 Ch 67
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
2 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Oracover Yellow CADMIO 10 m
1 x	Oratex Yellow Cub 10 m
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Balsa panel 4.0x100x1000 mm
3 x	Balsa panel 1.0x100x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Lock nut M2 (20 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Lock nut M2 (10 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	SCHARNHORST accessories
1 x	La Capitania di Venetia accesories
1 x	Hinge 4x14 mm (20 pcs)
1 x	Rigid coupling brass Ø 3 mm L: 20 mm
1 x	Ancla Admiralsanker 60 mm (2pcs)
1 x	SERVO HOLDER
1 x	F-16 Scale 1:6, Electric retract landing gear
1 x	Tank + hopper Kevlar ASPIRE 4 L Kero / 1.5 L Smoke
1 x	Set Legs + Wheels with brake ASPIRE
1 x	Autogyro Cierva C30 Spain
1 x	ASH 31 Mi Scale:1/3 - 7m, elevator
1 x	AC-10 pre-rotacion with motor
1 x	F-16 Scale 1:6 Camuflaje Grey (1.630mm)
1 x	F9F COUGAR Grey ARF 1.562 mm
1 x	Tank Kevlar ASPIRE 6 L Kero
1 x	HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x	Bags de Luxe ASPIRE
1 x	Bags wings/rudder ASPIRE
1 x	F-16 Scale 1:6 (1.630mm)
1 x	Bird (Aero-naut)
1 x	L-39 Albatros 1:4.75, Electric retract landing gear
1 x	ASPIRE Red ARF 2.000 mm, Canopy
1 x	HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	PropCover 16-20" (1 pcs)
1 x	5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x	Propeller 8x4,3 SlowFlyer
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Propeller 10x4,7 SlowFlyer
1 x	Swing 1000
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	Xoar Electric Beechwood Prop 20x10
1 x	TX 250 mW especial GOPRO
1 x	Metalic nose for PROJETI
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Propeller APC 16x6 Glow/Gas
1 x	Propeller MEJLIK 20x13 N-3 Blades
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Propeller FALCON 27x10 3-BL carbono-gas
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Propeller MEJLIK 30x12
1 x	Propeller MEJLIK 24x10 TH
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	FALCON 24X9 CARBON PROPELLER (GAS)
1 x	Propeller APC 15x6 Glow/Gas
1 x	Propeller MEJLIK 22x10
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	SERVO DES 588 BB MG
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	Motor MVVS 5.6/690 GLIDER
1 x	Shaft for A60-L V4
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Shaft for A60-L (140mm)
1 x	Motor A20-26 M EVO
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	Motor A50-14L Turnado V3 Glider
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Propeller APC 11x7 Glow/Gas
1 x	FALCON 24X12 CARBON PROPELLER (GAS)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	CA Glue fast 20g
1 x	Propeller APC 11x5 Glow/Gas
1 x	FALCON 26X10 CARBON PROPELLER (GAS)
1 x	Propeller APC 12x8 Glow/Gas

17,286.15EUR