17.00EUR

Hardener Aero EPH 161 (500 g)
[R11212505]

Hardener Aero EPH 161 (500 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	Round Rod 1,0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	White smoke bombs AX-3 (10 pcs)
1 x	White smoke canister 65 g
1 x	Green smoke canister 65 g
1 x	Initior Transmitter FTX2 Wireless
1 x	"S" set for boats
1 x	Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace)
1 x	Battery LiPo GENS 2200 mAh 3S 11.1v 45C (Gens Ace)
1 x	Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
1 x	Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace)
1 x	Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace)
1 x
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Ring 320 mm length (5 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	PIX Hawk with accesories
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Tape GFK 50 mm
1 x	Spikes Band (5 m)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 400 mm (2 pcs)
2 x	Cinta Goldfix 1m
1 x	20x1000 mm Ring Strap Back To Back
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Spray adhesive AEROFIX 2
1 x	Sanyo RX Battery Eneloop 6,0 V FUT
1 x	Horn 6/20 with M3 Bearing
3 x	Stickers-digit for marking
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x	Battery LiPo TATTU 2300 mAh 4S 14,8V 45C
1 x	Batería LiPo TATTU 1050 mAh 6S 22,2V 120C R-Line
1 x	Battery LiPo TATTU 2000 mAh 3S 11,1V 100C
2 x	Battery LiPo TATTU 1550 mAh 3S 11,1V 75C
1 x	Rocket D3-P
1 x	Battery LiPo TATTU 450 mAh 4S 14,8V 75C
2 x	Battery Lipo TATTU 750 mAh 4S 14.8v 95C R-Line
1 x	Round Rod 5,0x1000 mm
1 x	Battery LiPo TATTU 2300 mAh 3S 11,1V 45C
2 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	4 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	5 line servos wire black (1 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	DEMON CORTEXpro
1 x	bavarianDEMON USB cable
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Glases Aspen
1 x	Silicone red 6,0 qmm wire ( 1 m)
1 x	30 cm BEC cable (female)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Scale exhaust K100TP
2 x	KingTech Turbineoil 5L
2 x	GSU Kingtech
1 x	Fod Guard 94x32 mm
2 x	KingTech Turbineoil 10L
1 x	XPower XC5030/14 LS
1 x	XPower XC3522/5 LS
1 x	Set stickers JEEMO "Andy"
1 x	VIPER JET G2 Esq. 2 White/Red
1 x	Turbine KingTech K30G Restart
2 x	Kerostarter K30G
1 x	Pendulun "Special" to tank 60g
2 x	Battery LiFe -3800/25C-3S 9.9V
2 x	Turbine KINGTECH K85 G4
2 x	Turbina KINGTECH K180 G4+
1 x	Fod Guard 94x34 mm
1 x	Jet Pipe 160N-250N (120/130 mm)
1 x	Clamp K30 G3
2 x	Turbina KINGTECH K70G4
1 x	Turbina KINGTECH K120 G4
2 x	Burner Plug K30/ K45
1 x	Bluetooth Adapter JET CENTRAL
2 x	Battery LiFe -2100/25C-3S 9.9V
1 x	Exhaust K45TP
3 x	FOD Screen K45/60/70/85
1 x	Scale exhaust K45TP
1 x	Pipe Jet REVEL titanio/aluminio
1 x	Turbine KINGTECH K100 G4
1 x	Turbina KINGTECH K142 G4M
2 x	KingTech T-Modul 5 in 1 Telemetry
1 x	Smokelance
1 x	Battery LiFe -1450/25C-3S 9.9V
2 x	Turbine KINGTECH K160 G4
2 x	Turbina KINGTECH K65 G4+
2 x	Battery LiFe -3000/25C-3S 9.9V
1 x	Turbina KINGTECH K55G4
2 x	Bomba KP500V Kingtech
1 x	JETCAT ADITIVO ANTIESTATIC 120ml
1 x	KingTech K100TP G4+ Turboprop
1 x	KingTech K45TP G4 Turboprop
1 x	Jet Pipe for ASPIRE 2m JMF
2 x	Turbine KingTech K45G4+
1 x	Jet Pipe for A-10 Skymaster (set 2 pcs)
1 x	FOD Screen K140G/K180G/K210G
1 x	Jet Pipe 40N-80N (200 mm)
1 x	Fod Guard 83x32 mm
1 x	MIG AC 400 /14
1 x	Jeemo Dolly
1 x	Motor XPower F2915/12 XLight
1 x	VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x	VIPER 1.7 Electric break wheels + structure
1 x	VIPER JET G2 Esq. 2 Red/White/Silver
1 x	XICOY X45 rail
1 x	Fuselage Bags JEEMO
1 x	Motor XPOWER F2919/10 F5J Light
1 x	Wings Bags JEEMO
1 x	XPower XC4226/12 LS
1 x	Lipo TATTU 1400 mAh 6S 22.2v 120C R-Line
1 x	DUPLEX 2.4EX MUI 150 Sensor
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	ALU servo arm 3 mm shaft
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	LA500 tail empennage
1 x	Cable set Premium™ MAXI "one4two"
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p

57,758.82EUR