390.01EUR

Epoxy 40 min (Resin). 25Kg
[R1001353]

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

Suitable hardeners for Epoxy Resin L:

Hardener S
Potlife: 20 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 139-0 to 100 140-5

Hardener L
Potlife: 40 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 144-0 to 100 145-5

Hardener EPH 161
Potlife: 90 minutes
Mixing ratio: 100 : 25 parts by weight resin to hardener, 100 : 49 parts by volume resin to hardener
Order no. 112 123-5 to 112 125-4

Hardener EPH 500
Potlife: 60 minutes
Mixing ratio: 100 : 63 parts by weight resin to hardener, 100 : 71 parts by volume resin to hardener
Order no. 100 147-2 to 100 147-8

Hardener W 300
Potlife: 300 minutes
Mixing ratio: 100 : 35 parts by weight resin to hardener, 100 : 42 parts by volume resin to hardener
Order no. 100 149-4 to 100 149-7

Hardener GL 1
Potlife: 30 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 095-3 to 104 095-7

Hardener GL 2
Potlife: 210 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 100-3 to 104 100-7

Hardener CL
Potlife: 60 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 109 285-H-3 to 109 285-H-6

Please order hardener separately

under request

Reviews

Quick Find

Shopping Cart

1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Buy Perforated film 100 cm / 10 m
1 x	ABS 500 x 400 x 1 mm (white)
2 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Buy Perforated film 100 cm / 50 m
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	ABS 500 x 400 x 2,0 mm (white)
2 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Marker ties (20 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x
1 x	20x200 mm battery rings
1 x	Parachutist
1 x	Smoke set "M"
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Glases Ace
1 x	Red smoke canister 100 g
2 x	PCARD Wireless System
2 x	Blue smoke canister 140 g
1 x	AX-60 starters (5 pcs)
2 x	White smoke canister 100 g
1 x	Smoke set "Glider"
2 x	Yellow smoke canister 65 g
1 x	Red smoke canister 65 g
1 x	"M" set
1 x	3l Smoke oil
2 x	Electric rocket starters (6 pcs)
1 x	Motor A2212/13T
1 x	SIMtransmitter 6 Mode 2
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Foam plastic plates (310x210x8 mm)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	Ball Link Plier
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Extension silicon 30 cm male (Graupner)
1 x	Stickers-digit for marking
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Support FUEL DOT V3
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	SyRen 10A 6V-24V Regenerative Motor Driver
1 x	SyRen 50A 6V-30V Regenerative Motor Driver
1 x	Tape GFK 50 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 240 mm (2 pcs)
1 x	Initior Receiver FRX2 Wireless
2 x	White smoke canister 65 g
1 x	Blue smoke canister 100 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Green smoke canister 140 g
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	Yellow smoke canister 140 g
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	"S" set for boats
1 x	Green smoke canister 65 g
1 x	Parachute expulsion foam
1 x	Landing gear Rocket 400
1 x	Allen wheel collar M3x5
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	41x5,5 mm wires output (2 pcs)
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	10 mm Prop Adapter M12
1 x	Digital precision scale up to 2000 g
1 x	3,2 mm Prop Adapter M6
1 x	Propeller set 400 (2R+2L)
1 x	5 mm Prop Adapter M6
1 x	Xplorer1 anemometro
1 x	3,2 mm Prop Adapter M6
1 x	Dust collector for mould cleaning
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	3 mm Long Prop Adapter M5
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Battery bed V2_M (black)
1 x	LiPo Storage Box Standard 1 Type 1
1 x	Steering arm 16 mm Ø 4 mm
1 x	Locking cable tie 2.5x100 (uds)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Control for forward wheel (MINI)
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Allen wheel collar M4x6
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	5 mm Prop Adapter CN-Spinner
1 x	3,2 mm Prop Adapter M5
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	Oil FUCHS 1 liter
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	5 mm Prop Adapter M6
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Prop Shaft Adapter 5 mm "long"
1 x	5 mm Prop Adapter M8
1 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	AC-10 pre-rotacion with motor
1 x	Xplorer3 anemometro
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Epoxy 40 min (Hardener). 10Kg
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)

6,187.25EUR