4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Extension MPX-MPX 20 cm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock
Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	XT-60 connector (male) temporarily out of stock

Quick Find

Shopping Cart

2 x	Connectors banna oro 4 mm (M/F)
2 x	XH female balance (2S) connector (2 pcs)
2 x	Conector BEC female (10 pcs)
2 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
2 x	XH female balance (4S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Servo Controller Fibra optica
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	DIVA cabin cruiser
1 x	ALPHA 1000mm BL ARTR
1 x	Joint with bearing M2 22x5,5
1 x	Propeller POWER-PROP 15x10
1 x	Porpeller HUNTER 400
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Ball link M3 (6 uds)
1 x	Propeller electric carbon 10.5x7
1 x	Joint with bearing M2,5 22x5,5
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Propeller electric carbon 8.5x5
1 x	Propeller electric carbon 7x7
1 x	1/6 Pilot "Cindy"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Bandera Frankr 4x6
1 x	Ancla 35 x 22 mm (2 pcs)
1 x	Ancla Hist. 67 mm (2 uds)
1 x	Railing Ø 2mm (20 pcs)
2 x	MG cannon 1.8 cm (5 pcs)
1 x	Hinge 4x14 mm (20 pcs)
1 x	SCHARNHORST accessories
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	Marker ties (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	5 mm Prop Adapter M8
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Epoxy MID-CURE™ 15 min (130g)
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors DEANS (T)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	MPX Sub-D Adaptor
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Gold antispark 4 mm plug
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connector CAN 15
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	XH male balance (4S) connector (2 pcs)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	SERVO HOLDER
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Propeller POWER-PROP 15x8
1 x	Propeller POWER-PROP 11x6
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Propeller POWER-PROP 14x8
1 x	Long ball link M2 (6 uds)
1 x	Propeller electric carbon 9.5x6
1 x	Short ball link M1.6 (6 uds)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Piloto jet 130 mm
1 x	Pilot "Goose" (Slimline)
1 x	1/10 Pilot "Jack"
1 x	1/6 Pilot "Tony"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Crystal TX 35.150 Ch 75
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Coupling bush 5 - 5 mm
2 x	La Capitania di Venetia accesories
2 x	Stick coupler Ms 15 mm
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Prop Shaft Adapter 5 mm "long"
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Aero-Master Wings (Aero-naut)
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Servo Mount S (red)
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	3.2 mm Prop Adapter M8
1 x	4 mm Prop Adapter M8
1 x	Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1
1 x	Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	XH female balance (3S) connector (2 pcs)
1 x	Conector Servo female 4 pines
1 x	Connectors banna oro 3 mm (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna gold 5,5 mm (M/F)
2 x	XH male balance (3S) connector (2 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	XH female balance (5S) connector (2 pcs)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Fishing boat Jule Fischkutter
1 x	Catalog AERO-NAUT 2016
1 x	Remolcador "Jonny Hafenschlepper"
1 x	Pilot Lotsenboot
2 x	Tirpiz Battleship 1:200
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Propeller electric carbon 6x5
1 x	Propeller electric carbon 10x6
1 x	Ball link M3 (10 pcs, flat ball)
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	M3 Maxi ball link (2 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	6 mm ball link M3 (10 pcs)
1 x	Ball link M1.6 (6 uds)
1 x	Propeller POWER-PROP 14x9
1 x	Propeller electric carbon 10x7
1 x	Socket head long ball link M3 (2 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Propeller POWER-PROP 10x6
1 x	Short ball link M2 (6 uds)
1 x	Short ball link M3 (6 uds)
1 x	Fixed launching hook
1 x	Ball link M2 (10 pcs)
1 x	Joint with bearing M3 22x5,5
1 x	Long ball link M3 (6 uds)
1 x	Propeller POWER-PROP 11x8
1 x	Towing hook <3m
1 x	Socket head long ball link M3 (6 uds)
1 x	Propeller electric carbon 9.5x5
1 x	Propeller POWER-PROP 13x8
1 x	800TVL CMOS camera for FPV
1 x	Ball link M2,5 (10 pcs)
1 x	Propeller POWER-PROP 14x9 Izda
1 x	Propeller electric carbon 6.5x4
1 x	Propeller electric carbon 10x8
1 x	Socket head ball link M3 (2 uds)
1 x	Towing hook
1 x	Propeller electric carbon 8.5x7
1 x	Propeller electric carbon 10.5x6
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Long ball link M1.6 (6 uds)
1 x	Propeller POWER-PROP 13x10
1 x	Propeller electric carbon 9.5x7
1 x	M3 Maxi ball link (2 uds)
1 x	Propeller electric carbon 8.5x6
1 x	M3 Maxi ball link (2 uds)
1 x	Propeller POWER-PROP 12x9
1 x	Socket head ball link M3 (2 uds)
1 x	Propeller POWER-PROP 11x9
1 x	Propeller POWER-PROP 10x7
1 x	Ball link M3 RPA's-UAV's
1 x	Propeller POWER-PROP 14x10
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Pilot "Anthony" (Slimline)
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	1/6 Pilot "John"
1 x	1/12 Pilot "Fighter"
1 x	Piloto JET 1:3,5
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	1/4 Pilot "Mike"
1 x	1/6 Pilot "Garry"
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/12 Pilot "Langley"
1 x	1/7 Pilot "Japanese"
1 x	1/12 Pilot "Tom"
1 x	Pilot JAN 1/4 Saiplanes
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	1/6 Pilot "Buddy"
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	1/10 Pilot "Jimmy"
1 x	Crystal Universal RX 35.150 Ch 75
1 x	Crystal Universal RX 35.050 Ch 65
1 x	Crystal Universal RX 35.140 Ch 74
1 x	Anchor 25 mm (2 uds)
1 x	Rigid coupling brass Ø 5 mm L: 25 mm
1 x	10 mm Prop Adapter M12
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	SCHARNHORST Battleship 1:200
1 x	2,3 mm Prop Adapter M6
1 x	4 mm Prop Adapter M8
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	5 mm Prop Adapter M8
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	5 mm Prop Adapter CN-Spinner
1 x	Rudder 2_Tray 4~4.5 inch
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Receiver bed (Blue)
1 x	2 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Dumper propeller 6/8 mm
1 x	5 mm Prop Adapter M6
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	3,2 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	resin-hardener package L-385 with hardener H-385
1 x	Pegamento Pu R 50g polyuretano
1 x	Cotton Flocks, bag/ 500 g
1 x	UHU hart 35 g
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x

7,331.27EUR