1 x | |
1 x | Me-163 |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Cross Connector 4.0 mm x 1000 mm |
2 x | CC 02 |
1 x | SUS wire 3m (nylon coated) |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Hot Glue Stick RED |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Jeti Black cap |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
2 x | Short ball link M3 (6 uds) |
1 x | Oracover ROYAL RED 2m |
1 x | Canopy Latch |
2 x | Socket head long ball link M3 (2 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Joint with bearing M2,5 22x5,5 |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Glases Aspen |
1 x | Ball link M2,5 (10 pcs) |
1 x | Oracover Yellow CADMIO 10 m |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
3 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
3 x | Ball link M3 (6 uds) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Smoke set "Glider" |
1 x | Xplorer1 anemometro |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | White smoke canister 140 g |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | White silicone 0,25 qmm wire (150 m) |
2 x | Yellow smoke canister 100 g |
1 x | Cabel "Y" 15 cm |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Xplorer2 anemometro |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Propeller balancer |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Propeller balancer |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Autogyro Cierva C30 Spain |
1 x | Nut M2 |
3 x | Bearing 3x6x2,5 |
1 x | Bearing housing |
2 x | Side rudder |
2 x | Servo Fork |
2 x | Tail boom |
1 x | LA500 tail empennage |
1 x | Covered closure or fairings |
1 x | Schul-Malpinsel Gr.5 |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Male Prolonger TP 4/5S |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
2 x | Dean "T" - Futaba Adapter |
1 x | PSC 5 |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
2 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
3 x | Birch plywood plate 600x300x3.0 mm |
1 x | Pushrod octagone 4/3 |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Birch plywood plate 600x300x2.5 mm |
3 x | Balsa panel 10x100x1000 mm |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | Balsa panel 6.0x100x1000 mm |
1 x | Joint with bearing M3 22x5,5 |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Hitec 38 mm servo arm with ball link |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Hitec 25 mm servo arm with ball link |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | DPSI LR-S (with push buttons) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | OPTOTRONIX Aurora LCU |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Fuel bottle 500 ccm |
2 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Cockpit metalic closing |
1 x | TrainerCord (master-learner) |
1 x | JETImodel DPS 40 |
1 x | MAX BEC 2D plus EX |
1 x | Long Switch On/Off micro |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
3 x | CC 05 |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Interruptor SPS 70v 60/120A |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Switc electronic 30 Amp |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
3 x | Circlick securite |
1 x | Precision wrench L100 mm |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Dust collector for mould cleaning |
1 x | Universal Filter |
1 x | Sealing Iron Sleeve STD |
1 x | SPS 70V 100/200 A |
1 x | Handle for PERMAGRIT lime |
1 x | 25 mm Sandpaper file |
2 x | Battery charging cable XT60 |
2 x | Steel brush wheel with 2.35mm |
2 x | CC 01 |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | SPS 70V 140/280 A |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | 30 cm BEC cable (female) |
1 x | Selfstart electronic switch |
1 x | Opto Gas Engine Kill Switch |
1 x | SBEC 30 D |
1 x | SBEC Jeti |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | MPX-Dean "T" Adapter |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Mini-handed clamp |
1 x | Sealing Iron Sleeve PROF |
1 x | 30 cm BEC cable (male) |
2 x | 2,0x50 mm allen screwdriver |
1 x | DPSI magnetic switch actuator (housing) |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Hot Glue Stick BLACK |
1 x | 2 LiPo XH>EH adapter |
1 x | SBEC 40 |
2 x | 5 LiPo XH>EH adapter |
2 x | 4 LiPo XH>EH adapter |
2 x | 3 LiPo XH>EH adapter |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | MAX BEC |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | USB HLS prog. interface |
2 x | |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Electronic switch JETI SP06 Opto |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | SWTU2 switch |
1 x | Multi-adapter balancer JST - TP |
3 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Adapter lead MPX/XT60 |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Adapter lead MPX/EC3 |
3 x | CC 03 |
2 x | Magnetic Interruptor MULTIPLEX |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Birch plywood plate 600x300x1.5 mm |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
3 x | Balsa panel 8.0x100x1000 mm |
1 x | Long ball link M1.6 (6 uds) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
3 x | quality beech plywood BIRCH 600x300x2.0 mm |
3 x | Balsa panel 1.5x100x1000 mm |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
3 x | Pushrod octagone 3/2 |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Long ball link M2 (6 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Ball link M2 (10 pcs) |
2 x | Landing gear frontal support 25x32x16 |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
2 x | Birch plywood plate 600x300x1.2 mm |
1 x | Tip wing protector 30x10 (2 pcs) |
3 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Socket head ball link M3 (2 uds) |
2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Long ball link M3 (6 uds) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
3 x | A/C quality beech plywood 600x300x0.8 mm |
3 x | Balsa panel 1.0x100x1000 mm |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Short ball link M2 (6 uds) |
3 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Ball link M3 (10 pcs, flat ball) |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
2 x | 6 mm ball link M3 (10 pcs) |
2 x | M3 Maxi ball link (2 uds) |
3 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
2 x | Tip wing protector 40x14 (2 pcs) |
3 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Joint with bearing M2 22x5,5 |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
3 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Wheel collar 6 mm Ø (4 uds) |
2 x | Birch plywood plate 600x300x3.0 mm |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | A/C quality beech plywood 600x300x8.0 mm |
3 x | ABS tube 10.0x8.0x1000 mm |
2 x | ABS tube 2.0x1.0x1000 mm |
2 x | Hitec 20 mm servo arm |
3 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
3 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | DPSI OCP Overload protection |
2 x | DPSI Micro MPS |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Futaba 25 mm servo arm with ball link |
1 x | Futaba 52 mm servo arm |
1 x | DPSI Ampere & Voltage bundle |
1 x | Hitec 30 mm servo rounded arm |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Cotton Flocks, bag/ 500 g |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | Hitec 38 mm servo arm |
2 x | Horizontal mounting servo holder |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Futaba 20 mm servo arm |
2 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Servo-V-Limiter 5.2V |
2 x | Switch magnet for gas cap and magnet switch actuators |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | ABS tube 14.0x10.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Futaba 54 mm servo arm with ball link |
1 x | Adapter rotula M3 |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Conector MT-60 (pair) |
1 x | Charger SKY RC e680 |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | KAVAN Hand crank fuel pump |
1 x | Ciano KAVAN Thin 20g |
1 x | Servo TT ACE SHV 1504 MG |
1 x | |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | PropCover 16-20" (1 pcs) |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | PropCover 16-20" (2 pcs) |
1 x | Blade Holder Full (4 blades) |
1 x | Motor Mega AC 16/15/07 COMBAT |
1 x | FIALA Propeller 19x12 Electric |
1 x | Motor Mega AC 16/25/02 |
1 x | Spinner 40 mm Black (Kavan) |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Angle of incidence meter |
1 x | Medidor ángulos y/o incidencias |
1 x | Propeller hub spacer 8/5.5 |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
2 x | Baering 3x8x4 |
1 x | Head core bushing |
1 x | Nut M1,6 |
1 x | Head lower part New |
2 x | Rudder |
2 x | Ball joint long |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Motor Mega AC 16/30/01 |
1 x | Motor Mega AC 16/25/06 |
1 x | Motor Mega AC 16/07/04 |
1 x | FIALA Propeller 23x8 Electric |
1 x | Motor Mega AC 22/30/03 |
1 x | Motor Mega AC CAR 10 PRO |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser |
2 x | Head core |
2 x | Head runner |
2 x | Steering lever |
2 x | Head spacer |
2 x | Blade holder center GFK 0,5 mm |
2 x | Balls 4 mm |
1 x | Screws M1,6x6 Allen |
1 x | LA500 nose |
1 x | Female connector for 16 pines AWG |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Female connector for 12 pines AWG |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
2 x | FX three-position switched channel, long |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | MPX 8 pins plug mold |
2 x | Tool for entel |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Snap long M2 (10 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
2 x | BEC 3A FOXY |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Ball link M1.6 (6 uds) |
2 x | Screwdriver for Torx® TX6 |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Cable adapter iCharger |
2 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Thread locker "Medium" 10 g |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | DPSI RV Mini 6 (2008) |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Power MULTIlight |
1 x | Motor Set CHALLENGER Indoor |
1 x | ABS tube 12.0x10.0x1000 mm |
2 x | Blades 330mm |
2 x | Steel Screw M1x8 (10 pcs) |
1 x | Servo NARO Max Std |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Rotorshape Autogyro |
1 x | Battery plate |
1 x | Head lower part |
1 x | Blade holder lower |
1 x | Rotorhead pushrod |
1 x | Raer wall |
1 x | Blade holder center |
1 x | Side Plate |
1 x | Screws flush mount M2 |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Starter EM Gear Power 80 |
1 x | Connector CAN 15 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Crimping tool |
1 x | |
1 x | Dremel 3000 130W |
1 x | M3 Maxi ball link (2 uds) |
1 x | Screwdriver for Torx® TX8 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | ASG 32 560 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | PT 20x13 EL Propeller |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | Green smoke canister 100 g |
1 x | White smoke canister 100 g |
1 x | Yellow smoke canister 140 g |
1 x | FunCub NG verde RR |
2 x | Hitec 52 mm servo arm |
1 x | LENTUS Multiplex Fundas alas |
1 x | ALU double servo arm 3 mm shaft |
1 x | HITEC 20 mm servo arm with ball link |
2 x | Futaba 2x20 mm servo double arm |
1 x | Spinner 42 mm EXTRA 330SC |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Power supply NT 40 Amp. |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | GPS V2 Sensor for M-LINK receivers |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | SIMtransmitter 6 Mode 2 |
2 x | ESC PULSAR A-40 |
1 x | Rotorshape Elevator |
1 x | Blade holder upper |
1 x | Head upper part |
1 x | Wheel keeper washer |
1 x | Screw M3x16 |
1 x | Washer 2.2×4 |
1 x | Medium pin type hinge (12 uds) |
1 x | Nut M2 securing |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | LA500 rotor head shaft |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
2 x | Connector Sub-D 2+5 Male |
1 x | Connector Sub-D 2+5 Female |
1 x | Male connector for 10 pines AWG |
2 x | JETImodel Addcap 1640 |
1 x | Male connector for 6 pines AWG |
1 x | SPARK Switch 12v |
2 x | Hacker X-Pro USB interface V2 |
1 x | Micro Switch button |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | DPSI Ampere battery backer |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Female connector for 6 pines AWG |
1 x | Female connector for 20 pines AWG |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Cianocrilato MD GEL 454 tube 20g |
2 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Activator spray for Cyanoacrylates 200 ml |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | CA Glue fast 20g |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Servo SAVOX SH 0257 MG |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | HBC 10035-3 32-Bit |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | |
1 x | SPARK Switch 5.9v |
2 x | Copier 2x20 cm pcs |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Vacuum pump P1-N |
2 x | Cut tube |
1 x | TMM 2512-3S heli |
1 x | Screwdriver for Hexagon 1,27mm |
2 x | CM-3 |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Propeller diller for DLE170 |
1 x | Z Bender - S Type Tool |
2 x | Balsa panel 4.0x100x1000 mm |
1 x | Short Switch On/Off micro |
1 x | EWC3 100 cm wing connector |
1 x | Mini Infrared Thermomiter |
2 x | Screwdriver for Hexagon 1,5mm |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Snap short M2 (10 uds) |
1 x | Backmountset complete A40 |
1 x | FesEx-Uni6 System |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | EC-Cutter |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Dean-T Plug Mold |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | 3,0x60 mm allen screwdriver |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Lead with adhesive (2 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | LED blink wire flashing (green - 2pcs) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | LED blink wire flashing (white - 2pcs) |
1 x | PT 22x10 EL Propeller |
1 x | LED wire (rojo - 2pcs) |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | PT 21x13 EL Propeller |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | LED wire (green - 2pcs) |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | BALSA triangular 10x10x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | ED Position Lights wireless (Set of 3) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | LED wire (blue - 2pcs) |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Green smoke canister 65 g |
1 x | Blue smoke canister 140 g |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Central Box 220 |
2 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Hardener Aero EPH 161 (500 g) |
2 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | ESC RAY G2 R-20B BEC |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Interruptor On/Off Corto micro |
1 x | Módulo Bluetooth |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Emcotec SPS Magnetic Switch Actuator |
1 x | Futaba 30 mm servo rounded arm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | LENTUS Multiplex Landig gear retract |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | DPSI RV Mini 5 Magic |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Spray EC Red 400ml |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | PARKMASTER PRO Kit + (RR) |
1 x | CA Glue (medium) 20g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | COPILOT Multiplex |
1 x | "L" servo arm 65x49 mm (2 pcs) |
|
21,664.84EUR |