4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Extension MPX-MPX 20 cm temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock
Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) temporarily out of stock

Quick Find

Shopping Cart

2 x	ABS tube 16.0x14.0x1000 mm
2 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
2 x	ABS tube 20.0x18.0x1000 mm
2 x	ABS tube 3.0x2.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Tape GFK 50 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Foil for sticking flaps and ailerons
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Ring 320 mm length (5 pcs)
1 x	XH male balance (4S) connector (2 pcs)
2 x	XH female balance (4S) connector (2 pcs)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connector CAN 15
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	SE Ring 400 mm (2 pcs)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Conector BEC female (10 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
2 x	20x200 mm battery rings
1 x	Banna gold connector 2,5 mm (M/F)
1 x	MPX Sub-D Adaptor
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Optotronix Aurora Plug
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Stickers-digit for marking
1 x	XH female balance (5S) connector (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	AX-60 starters (5 pcs)
1 x	Pilot "Goose" (Slimline)
1 x	Spray YELLOW Inca Lexan 150ml
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Horn 6/27 with M3 Bearing
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Futaba BLS152 - Upper Case
1 x	Futaba Multi-Switch-Prop 12+2 DECODER
1 x	GPS, Vario and altitude Sensor SBS-01G
2 x	Cable S.BUS 3 salidas 100 mm
1 x	ABS tube 10.0x8.0x1000 mm
2 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	FUTABA T10 J T-FHSS
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Quadcopter Q50 Kit Carbon Fiber
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	F450/550 Quadcopter, landing gear
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Marker ties (20 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Oil FUCHS 1 liter
1 x	Z Bender - S Type Tool
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 200cc Std
2 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	PH6 adapter for 6mm M10 AXI for AXI41xx
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	ABS tube 3.0x1.0x1000 mm
2 x	120x60 mm SLH KOVO wheel
1 x	100 Newtons FEMA absorber
1 x	Connectors banna oro 2 mm (M/F)
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Battery FUTABA 18MZ
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Switch moment button, 2 functions, long FUTABA
1 x
1 x	Futaba T3PV T-FHSS
1 x	Maleta transporte FUTABA 10PX
1 x	Futaba FX36 2.4GHz FASST Test + R7008SB
1 x	Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ
1 x	Ø 50-60 mm canister holder
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	Receiver bed (Blue)
1 x	Ø 65-75 mm canister holder
1 x	Turbine CHEETAH 160 SE
1 x	White smoke canister 65 g
1 x	Fiberglass plate 620x540x2,0 mm
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Axle for motor A30-XL V2
1 x	FesEx-Uni6 System
1 x	Support XT60 conector (2 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Support Filtro FESTO
1 x	Angle support XT60 conector
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Soporte grifo FESTO (2 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support ECU Xicoy X-45
1 x	Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	1/7 Pilot "Japanese"
1 x	Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x	1/4 Pilot "Heidi"
1 x	1/6 Pilot "Garry"
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	FuelTank Cap (red)
1 x	FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A
1 x	22m Fitting barb
1 x	1/6 Pilot "Buddy"
1 x	Turbo Prop KS
1 x	Turbine LYNX 130
1 x	Turbine MAMMOTH 25.4 Kg
1 x	Blue smoke canister 100 g
1 x	Support FUEL DOT V3
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Film release agent PVA 25 ml
1 x	Fiberglass plate 620x540x0,3 mm
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Release film 100 cm x 50 m
1 x	Fiberglass plate 620x540x0,2 mm
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	PBS TJ 40-G2 Turbine
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	TARANIS Q X7
1 x	ECU BL180 Jets Munt
1 x	Axle for AXI 5330/xx motors

47,009.76EUR