Inicio » Catálogo » R-G.de » R5001832020PA3

125.00EUR

ARAMID panel nido de abeja 1300x2600x2 mm
[R5001832020PA3]

• High impact, vibration, and fatigue strength

• Extremely high compressive strength

• Very good chemical resistance

Light supporting material produced from aramid paper for fibre compound parts in sandwich construction. With reference to weight, honeycombs have the greatest resistance to pressure amongst all support materials and extremely good resistance to chemicals, impact, vibration and fatigue. They are also very flexible and thus also suitable for components with spherical roundings. Mould pressure is used to bond honeycombs. A vacuum bag is normally used.

Technical data:
Density: 29 kg/m³
Cell size: 3.2 mm
Production tolerances: Length ±75 mm, width ±50 mm, weight ±13 %, thickness ±0.2 mm
Compressive strength: Bare 0,56 MPa, stabilized 0.75 MPa
Shear strength: Length 0.45 MPa, width 0.3 MPa
Shear modulus: Length 15.0 MPa, width 11.0 MPa
Dimensions: 1300 x 2600 mm

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Horn de mando 6/35 con rótula M3
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn control flaps (1 pcs)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Horn de mando 5/20 con rótula M2
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Spray grafito 33
1 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Tapaporos 500 ml (DOPE)
1 x	Cera desmoldeante 650 g
1 x	Varilla acero roscada M2 - 1m
2 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Varilla acero Ø 4,5 mm x 1000 mm
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
2 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Varilla carbono 3.0 mm x 1000 mm
2 x	Varilla carbono plana 1000x3.0x1.0 mm
2 x	Varilla carbono 1.5 mm x 2000 mm
1 x	Varilla carbono 8.0 mmx1000 mm
2 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Varilla carbono 10 mm x 1000 mm
1 x	Varilla carbono 20 mmx1000 mm
1 x	Varilla carbono 2.5 mmx1000 mm
1 x	Varilla carbono 4.0 mmx1000 mm
1 x	Termo-retráctil negro tubo de 12,7 mm 2:1
1 x	Tuerca autoempotrable M3 (4 pcs)
1 x	Tornillo M2x12 mm aluminio (4 pcs)
1 x	Conector FUTABA Servo hembra (10 pcs)
1 x	Servo TOPMODEL DS9010 T
1 x	SERVO DES 657/675 Piñones
1 x	Plancha carbono 350x150x1.0 mm
1 x	Horn aluminio pequeño amarillo (2pcs)
3 x	TX 250 mW especial GOPRO
1 x	Maleta FUTABA Aluminio
1 x	Correa emisora FUTABA
1 x	Espuma caja emisora FUTABA longe case
2 x	Varilla acero Ø 2,5 mm x 1000 mm
2 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Varilla acero roscada M3 -1m
2 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Capuchón decorativo interruptores TX
1 x	Fibra de vidrio 280 g/m² (silane, tela cruzada) 100 cm x 20 m
1 x	Fibra de vidrio 25 g (2 m²)
1 x	Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Prolong/Adap correa Futaba T-10CG
1 x	Maleta aluminio MULTIPLEX MLink
1 x	Prolong/Adap correa HITEC Aurora 9, JR y Spectrum (azul)
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Capuchón decorativo interruptores TX cortos
1 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
2 x	Bayoneta de carbono cuadrada 5x5x220 mm
1 x	Varilla carbono 7.0 mmx1000 mm
1 x	Varilla carbono 12 mm x 1000 mm
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Plancha de balsa 1,5x100x1000 mm
1 x	Plancha contrachapado ABEDUL 600x300x1,0 mm
1 x	Gafas FPV Eachine EV800D
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Autogiro Cierva C30 Spain
1 x	Plancha de balsa 3,0x100x1000 mm
1 x	Plancha contrachapado Abedul 600x300x8,0 mm
1 x	Soporte CNC para pantalla FPV smitter Holder Vertical (Soportes
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	PVC termo-retráctil batería 135 mm transparente (1 m)
1 x	Film perforado 100 cm / 50 m
1 x	Bascula precisión 0.1- 600 g
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Termo-retráctil negro tubo de 4,8x1000 mm 2:1
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	Cianocrilato CA Gast 20g

2,084.71EUR