17.00EUR

Hardener Aero EPH 161 (500 g)
[R11212505]

Hardener Aero EPH 161 (500 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	Birch plywood plate 600x300x2.0 mm
1 x	Rubber profile 10-2 mm 2M
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	A/C quality beech plywood 498x247x1.2 mm
1 x	Parachute BACKUP X100
1 x	Paramotor BackPack XXS (without accessories)
1 x	MAX pilot ARTF
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	BOEING 727, Jet pipe for Boeing 727
1 x	Flat Connector 4.0 mm x 1000 mm
2 x	Motor Set CHALLENGER Indoor
1 x	Rescue 1,8m2 / BackPack
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Cap Hispano Aviación
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Paramotor BackPack XXS 2
1 x	ABS angle 1.5x1.5x1000 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Balsa panel 6.0x100x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	Propeller Pleg Glass-Fiber white 15x9.5
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Windsock Ozone L -1200 mm
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole
1 x	Balsa panel 5.0x100x1000 mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS half cane 7.0x1000 mm
1 x	FunCup XL RR
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Para-RC Mix
2 x	CRACK YAK (Mini) 600 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	CAM-Carbon Light Prop 10x4.5" (Prop right)
2 x	Beech dowels 4.0 x 1000 mm
1 x	Micro clevis 0.8 mm(10 uds)
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	LUCAS pilot ARTF
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Hovercraft sailcloth
1 x	BOEING 727, Retract set for Boeing 727
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Pipa 3D BULL MØ1 2.600mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Aramid 50 daN 50 m
1 x	Balsa panel 1.0x100x1000 mm
1 x	Parachute PV6 for F3J
1 x	Micro clevis (10 uds)
1 x	Motor A2212/13T
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
2 x	A/C quality beech plywood 498x247x2.0 mm
2 x	BALSA triangular 15x15x1000 mm
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	Rubber profile 8-2 mm 2M
1 x	Wing OXY 0,5 pulgadas2
1 x	Wing OXY 5,0 m2
1 x	Beech dowels 2.0 x 1000 mm
2 x	Softshell Hispano Aviación
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Molinete / Cabestrante amarre Scale 1:32
2 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Balsa panel 10x100x1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Brake controller for 28 and 36 mm Brakes
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Canopy Latch
1 x	Cockpit plastic closing
1 x	Locking cable tie 2.5x100 (uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	One touch canopy lock
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	SKY RC T400Q Charger 4x100w
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	JETI SPIN 80 Pro
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Glow starter with charger 230v
1 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	CHALLENGER Indoor
1 x	MXS-C (Mini) Blue
1 x	ASG 32 560 mm
2 x	Vest clothes Hispano Aviación
1 x	Cooler motor type 150
1 x	Cooler motor type 400
1 x	Futaba Female 40 cm extension
1 x	Extension 15 cm (Futaba)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	HERON RR
1 x	Aero-Master (Aero-naut)
1 x	ACTIVE ARF Electric 1.995 mm
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 30 cm female (Graupner)
1 x	FUNRAY RR
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension PVC 150 cm (Graupner)
1 x	Bird (Aero-naut)
1 x	Shirt Hispano Aviación
1 x	BLANIK 50 V2 Silver/Orange (SebArt)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	ASH 31 Mi Scale:1/3 - 7m, elevator
1 x	Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x	Round Rod 4,0x1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Profile ABS Square 3 x 1000 mm
1 x	Xplorer1 anemometro
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Rocket cardboard tube 25mm x 24mm x 230mm
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Cyanocrylate MD GA460 odourless 20g

9,232.23EUR